диметанола; 2- (гидроксиметокси) этоксиметанол; 2-метилолоксиэтоксиметанол; (1,2-этандиилбис (окси)) бисметанол

(этилендиокси) диметанол

этиленгликоль бис (полуформаль)

(этилендиокси) диметанол

1,2-бис (гидроксиметокси) этан

2- (гидроксиметокси) этоксиметанол

метанол, (1,2-этандиилбис (окси)) бис-

Жидкий консервант в банке, чистый (этилендиокси) диметанол

Для консервации пигментных суспензий, суспензий наполнителей, дисперсий полимеров, растворов и дисперсий клеев и загустителей, добавок для бетона, моющих средств, масляных эмульсий, полиролей и других химико-технических препаратов на водной основе.

Продукт может использоваться для борьбы с бактериями - против плесени и дрожжей лучше всего в сочетании с другими подходящими биоцидами.

Смешивается с водой в любых пропорциях.

ДРУГИЕ ТОВАРЫ ATAMAN KIMYA:

(частей на миллион)

Бактерициды Troyshield B2 Гексагидротриазин (HHT) 1000 - 3000

Troyshield МБМ Метиленбисморфолин (МБМ) 1000 - 3000

Бакзид Метилен-бисоксазолидин (МВО) 700 - 2000

Troyshield B7 (этилендиокси) диметанол (EDDM) 700 - 2000

Бодоксин AH EDDM 700 - 2000

Бациллат тетраметилолацетилендиуреа (TMAD) 1000 - 2500

Ebotec BT10 Бензизотиазолинон (БИТ) 800 - 1600

Ebotec BT80 "Boosted" BIT 800 - 1600

Mergal K20 BIT 400-800

Troyshield B20 «Усиленный» бензизотиазолинон (БИТ) 500 - 3000

Mergal 786 BIT + метилизотиазолинон (MIT) + хлор-метил-

изотиазолинон / метилизотиазолинон (CMIT / MIT) 400-800

Mergal 758 BIT; CMIT / MIT 1000–2000

Mergal MC14 CMIT / MIT 100 - 200

Mergal K9N CMIT / MIT 1000 - 2000

Стабилизированный бодоксином CMIT / MIT 500-1500

Mergal K14PLUS Стабилизированный CMIT / MIT 1000 - 2000

Тройщилд В60 Полимерный катионный компаунд 100 - 1000

Фунгициды Troyshield FX40 Йодопропинилбутилкарбамат (IPBC) 150 - 400

Troyshield PA10 IPBC 500 - 1000

Troyshield FSP40 Пиритион натрия (NaPT) 150 - 400

Cinon OI IPBC + октилизотиазолинон (OIT) 500 - 1000

Бактерициды и

Фунгициды Mergal KM90 "Boosted" BIT для жидкостей без формальдегида и против биопленки.

и грибки свободного пространства 700 - 1000

Mergal V698K4 EDDM + OIT 1000 - 2000

Бакзид 10Н МБО + НаПТ 500-1500

Бакзид 2 HHT + NaPT 500-1500

 

 

CAS no.: 3586-55-8;Ethylene glycol bis(semiformal);  Exocide FC ( EDDM ) is water based low toxicity formaldehyde donor biocide, developed for the complete in-can and head space protection of water based products. Exocide FC ( EDDM ) is 

effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Microorganisms grow at a rapid rate and without use of the correct 

biocide, numbers can increase dramatically.

In-Can degradation in paints, polymer and adhesives as a result of bacterial and fungal contamination, can result in:

• Loss of viscosity

• Gassing

• Discoloration

• Bad odors

• Fungal growth on product surface

• Product splitting

• Loss of adhesion

• Production clean down and production down time

• Loss of profit

Applications;

Exocide FC/ (ethylenedioxy) dimethanol is recommended for preservation of a wide range of applications including water based adhesives, polymer emulsions; water based decorative paints,

metal working fluids and construction chemicals. When products are prone to surface contamination by fungi and head space protection is required, Nipacide FC should be one of the biocides

of choice.  Exocide FC is effective against a wide range of spoilage organisms.

Use level;

Exocide FC / (ethylenedioxy) dimethanol should be evaluated in finished products at levels between 0.10% and 0.30%. Please note that Nipacide FC is a formaldehyde donor biocide and levels of free formaldehyde in 

individual products will vary depending on various parameters. It is recommended that if you have concerns about the level of free formaldehyde, this should be checked in the finished 

product. Exocide FC is particularly effective at preventing surface fungal contamination, in-can, by the slow release of formaldehyde.

(Ethylenedioxy)Dimethanol

IUPAC Name 2-(hydroxymethoxy)ethoxymethanol

Synonyms (ethylenedioxy)dimethanol;1,6-Dihydroxy-2,5-dioxyhexane;Methanol, 1,2-ethanediylbis(oxy)bis-;1,2-ETHANDIYLBIS(OXY)BISMETHANOL;[1,2-ethanediylbis(oxy)]bis-Methanol;

ethylene glycol dimethanol ether;2-(hydroxymethoxy)ethoxymethanol;2-methyloloxyethoxyme

(ethylenedioxy)dimethanol

EDDM

EC / List no.: 222-720-6

CAS no.: 3586-55-8

Mol. formula: C4H10O4

1,6-dihydroxy-2,5-dioxahexane

Nipacide FC

Exocide FC

1. Purity is more than 90%，less odor。

2. One kind of broad-spectrum bactericide with low toxicity & high efficient，suitable for water-based metalworking fluid, paint, adhesives and other products.

3. Quick effect, good stability, higher oil soluble, non skin sensitization, can effectively limit the bacteria,and fungi to some extent，Prevent bacterial resistance.

(ethylenedioxy) dimethanol

(Ethyleendioxy)dimethanol (reactieproducten van ethyleenglycol en paraformaldehyde (met EGForm)) (nl)

Biocidal active substances

(Ethylendioxy)dimethanol (Reaktionsprodukte aus Ethylenglycol und Paraformaldehyd (EGForm)) (de)

(ethylendioxy)dimethanol (reaktionsprodukter af ethylenglycol og paraformaldehyd (EGForm)) (da)

(ethylendioxy)dimethanol (reakční produkty ethylenglykolu a paraformaldehydu (EGForm)) (cs)

(ethylenedioxy)dimethanol (Reaction products of ethylene glycol with paraformaldehyde (EGForm)) (mt)

(etilendioksi)dimetanol (produkti reakcije etilen glikola s paraformaldehidom (EGForm)) (hr)

(etilendioksi)dimetanol (reakcijski produkti etilen glikola s paraformaldehidom (EGForm)) (sl)

(Etilendioksi)dimetanolis (etilenglikolio ir paraformaldehido reakcijos produktas (EGForm)) (lt)

(Etilendiossi)dimetanolo (prodotti di reazione di glicole etilenico con paraformaldeide (EGFform)) (it)

(Etilendioxi)dimetanol (productos de reacción de etilenglicol con paraformaldehído (EGForm)) (es)

(Etilendioxi)dimetanol [Produse de reacție ale etilenglicolului cu paraformaldehidă (EGForm)] (ro)

(Etilenodioxi)dimetanol (produtos de reação de etilenoglicol com paraformaldeído (EGForm) (pt)

(Etiléndioxi)dimetanol (etilén-glikol és formaldehid reakciótermékei (EGForm)) (hu)

(Etilēndioksi)dimetanols (etilēnglikola reakcijas produkti ar paraformaldehīdu (EGForm)) (lv)

(Etyleenidioksi)dimetanoli (etyleeniglykolin ja paraformaldehydin (EGForm) reaktiotuotteet) (fi)

(Etylendioxi)dimetanol (reaktionsprodukter av etylenglykol med paraformaldehyd [EGForm]) (sv)

(Etylenodioksy)dimetanol (produkty reakcji glikolu etylenowego z paraformaldehydem (EGForm)) (pl)

(Etüleendioksü)dimetanool (etüleenglükooli ja paraformaldehüüdi reaktsiooni saadused (EGForm)) (et)

(Éthylènedioxy)diméthanol [produits de la réaction entre l'éthylène glycol et le paraformaldéhyde (EGForm)] (fr)

(Αιθυλενοδιοξυ)διμεθανόλη [προϊόντα αντίδρασης της αιθυλενογλυκόλης με την παραφορμαλδεΰδη (EGForm)] (el)

(Етилендиокси)диметанол (продукти от реакцията на етиленгликол с параформалдехид (EGForm) (bg)

etylénbis(oxy)dimetanol [produkt reakcie etylénglykolu a paraformaldehydu (EGForm)] (sk)

Biocidal active substances

Methanol, 1,1'-[1,2-ethanediylbis(oxy)]bis-

IUPAC names

1,2-Bis(hydroxymethoxy)ethane

1,6-Dihydroxy-2,5-dioxahexane

2-(hydroxymethoxy)ethoxymethanol

2-(hydroxymethoxy)ethoxymethanol.

[2-(hydroxymethoxy)ethoxy]methanol

[ethane-1,2-diylbis(oxy)]dimethanol

Ethylene glycol bis(semiformal)

EDDM

Ethylene glycol bis(semiformal)

ethylenedioxy)dimethanol

reaction product ethylene glycol with para-formaldehyde

(Ethylenedioxy)dimethanol

Dimethylol glycol

3586-55-8

1,2-Bis[hydroxymethoxy]ethane

Ethylene glycol bis(semiformal)

1,2-Bis(hydroxymethoxy)ethane

1,6-dihydroxy-2,5-dioxahexane

1,6-dihydroxy-2,5-dioxyhexane

dimethanol

EINECS 222-720-6

(1,2-Ethanediylbis(oxy))bismethanol

Methanol, (1,2-ethanediylbis(oxy))bis-

DIMETHYLOL GLYCOL;1,2-Bis[hydroxymethoxy]ethane

Dascocide 9;Glycerol Impurity 5;(ethylenedioxy)dimethanol;2-methyloloxyethoxymethanol;1,6-Dihydroxy-2,5-dioxyhexane;1,6-Dihydroxy-2,5-dioxahexane;Ethylene glycol bis(seMiforMal);

1,2-ETHANDIYLBIS(OXY)BISMETHANOL;2-(hydroxymethoxy)ethoxymethanol;ethylene glycol dimethanol ether; (ethylenedioxy)dimethanol;1,6-Dihydroxy-2,5-dioxyhexane;Methanol,

 1,2-ethanediylbis(oxy)bis-;1,2-ETHANDIYLBIS(OXY)BISMETHANOL;[1,2-ethanediylbis(oxy)]bis-Methanol;ethylene glycol dimethanol ether;2-(hydroxymethoxy)ethoxymethanol;

2-methyloloxyethoxymethanol; Specification:

Appearance: colourless to yellowish liquid

Formaldehyde content (%): 42 - 48

pH value at 20°C (1% in dest. water): 7.0 - 8.0

Specific gravity at 25°C (g/ml): 1.180 - 1.200

Refractive index at 20°C: 1.430 - 1.443

 

Applications: Liquid in-can preservative

For the preservation of pigment slurries, filler suspensions, polymer dispersions, solutions and dispersions of glues and thickeners, concrete additives, detergents, oil emulsions,

 polishes and other chemical-technical water-based preparations. The product can be used to combat bacteria, mould and yeast. Miscible with water in any ratio.

(ethylenedioxy)dimethanol; 1,6-Dihydroxy-2,5-dioxyhexane; Methanol, 1,2-ethanediylbis(oxy)bis-; 1,2-ETHANDIYLBIS(OXY)BISMETHANOL; [1,2-ethanediylbis(oxy)]bis-Methanol; 

ethylene glycol dimethanol ether; 2-(hydroxymethoxy)ethoxymethanol; 2-methyloloxyethoxymethanol; (1,2- ethanediylbis(oxy))bismethanol

(ethylene dioxy) dimethanol

ethylene glycol bis(semiformal)

(ethylenedioxy)dimethanol

1,2-bis(hydroxymethoxy)ethane

2-(hydroxymethoxy)ethoxymethanol

methanol, (1,2-ethanediylbis(oxy))bis-

Liquid in-can preservative, pure (ethylendioxy) dimethanol

For the preservation of pigment slurries, filler suspensions, polymer dispersions, solutions and dispersions of glues and thickeners, concrete additives, detergents, oil emulsions, 

polishes and other chemical-technical water-based preparations.

The product can be used to combact bacteria - against mould and yeast best in combination with suitable other biocides. 

Miscible with water in any ratio.

OTHER PRODUCTS OF ATAMAN KIMYA : 

(ppm)

Bactericides Troyshield B2 Hexahydrotriazine (HHT) 1000 - 3000

Troyshield MBM Methylene bismorpholine (MBM) 1000 - 3000

Bakzid Methylene-bisoxazolidine (MBO) 700 - 2000

Troyshield B7 (Ethylenedioxy)dimethanol (EDDM) 700 - 2000

Bodoxin AH EDDM 700 - 2000

Bacillat Tetramethylolacetylenediurea (TMAD) 1000 - 2500

Ebotec BT10 Benzisothiazolinone (BIT) 800 - 1600

Ebotec BT80 "Boosted" BIT 800 - 1600

Mergal K20 BIT 400 - 800

Troyshield B20 “Boosted” Benzisothiazolinone (BIT) 500 - 3000

Mergal 786 BIT + Methylisothiazolinone (MIT) + Chloro-methyl-

isothiazolinone/Methylisothiazolinone (CMIT/MIT) 400 - 800

Mergal 758 BIT; CMIT/MIT 1000 - 2000

Mergal MC14 CMIT/MIT 100 - 200

Mergal K9N CMIT/MIT 1000 - 2000

Bodoxin Stabilized CMIT/MIT 500 - 1500

Mergal K14PLUS Stabilized CMIT/MIT 1000 - 2000

Troyshield B60 Polymeric cationic compound 100 - 1000

Fungicides Troyshield FX40 Iodo-propynyl-butylcarbamate (IPBC) 150 - 400

Troyshield PA10 IPBC 500 - 1000

Troyshield FSP40 Sodium pyrithione (NaPT) 150 - 400

Cinon OI IPBC + Octyl-isothiazolinone(OIT) 500 - 1000

Bactericides &

Fungicides Mergal KM90 "Boosted" BIT for formaldehyde-free fluids, and against biofilm

and headspace fungi 700 - 1000

Mergal V698K4 EDDM + OIT 1000 - 2000

Bakzid 10N MBO + NaPT 500 - 1500

Bakzid 2 HHT + NaPT 500 - 1500

No CAS: 3586-55-8; Éthylène glycol bis (semi-formel); Exocide FC (EDDM) est un biocide donneur de formaldéhyde à faible toxicité à base d'eau, développé pour la protection complète de la boîte et de l'espace libre des produits à base d'eau. Exocide FC (EDDM) est efficace contre un large éventail de micro-organismes, y compris les bactéries Gram positives et Gram négatives, les levures et les champignons. Les micro-organismes se développent à un rythme rapide et sans l'utilisation du bon biocide, leur nombre peut augmenter considérablement.

La dégradation In-Can dans les peintures, les polymères et les adhésifs à la suite d'une contamination bactérienne et fongique peut entraîner:

• Perte de viscosité

• Gazage

• Décoloration

• Mauvaises odeurs

• Croissance fongique à la surface du produit

• Division du produit

• Perte d'adhérence

• Nettoyage de la production et temps d'arrêt de la production

• Perte de profit

Applications;

L'exocide FC / (éthylènedioxy) diméthanol est recommandé pour la conservation d'un large éventail d'applications, y compris les adhésifs à base d'eau, les émulsions de polymère; peintures décoratives à base d'eau, fluides pour le travail des métaux et produits chimiques de construction. Lorsque les produits sont sujets à une contamination de surface par des champignons et qu'une protection de l'espace libre est requise, le Nipacide FC devrait être l'un des biocides de choix. Exocide FC est efficace contre un large éventail d'organismes de dégradation.

Utiliser le niveau;

L'exocide FC / (éthylènedioxy) diméthanol doit être évalué dans les produits finis à des niveaux compris entre 0,10% et 0,30%. Veuillez noter que Nipacide FC est un biocide donneur de formaldéhyde et les niveaux de formaldéhyde libre dans les produits individuels varieront en fonction de divers paramètres. Il est recommandé que si vous avez des inquiétudes concernant le niveau de formaldéhyde libre, cela devrait être vérifié dans le fini

produit. Exocide FC est particulièrement efficace pour prévenir la contamination fongique de surface, en boîte, par la libération lente de formaldéhyde.

(Éthylènedioxy) Diméthanol

Nom IUPAC 2- (hydroxyméthoxy) éthoxyméthanol

Synonymes (éthylènedioxy) diméthanol; 1,6-dihydroxy-2,5-dioxyhexane; méthanol, 1,2-éthanediylbis (oxy) bis-; 1,2-ÉTHANDIYLBIS (OXY) BISMÉTHANOL; [1,2-éthanediylbis (oxy) ] bis-méthanol;

éther diméthanolique d'éthylène glycol; 2- (hydroxyméthoxy) éthoxyméthanol; 2-méthyloloxyéthoxyme

(éthylènedioxy) diméthanol

EDDM

N ° CE / Liste: 222-720-6

N ° CAS: 3586-55-8

Mol. formule: C4H10O4

1,6-dihydroxy-2,5-dioxahexane

Nipacide FC

Exocide FC

1. La pureté est supérieure à 90% moins d'odeur。

2. Un type de bactéricide à large spectre avec une faible toxicité et une efficacité élevée, adapté aux fluides de travail des métaux à base d'eau, aux peintures, aux adhésifs et à d'autres produits.

3. Effet rapide, bonne stabilité, sensibilisation plus soluble dans l'huile, non cutanée, peut limiter efficacement les bactéries et les champignons dans une certaine mesure ， Empêcher la résistance bactérienne.

(éthylènedioxy) diméthanol

(Éthylènedioxy) diméthanol [produits de la réaction entre l'éthylène glycol et le paraformaldéhyde (EGForm)] (en)

Substances actives biocides

 

 

(ethylenedioxy) dimetanol,EDDM (ethylenedioxy)dimethanol  (1,6-Dihydroxy-2,5-dioxahexane) Ethylene glycol bis(semiformal), su bazlı yapıştırıcılar, su bazlı dekoratif boyalar, 

metal işleme sıvıları ve yapı kimyasalları, polimer emülsiyonları dahil çok çeşitli uygulamaların korunması için tavsiye edilir; 

CAS no .: 3586-55-8 Etilen glikol bis (yarı normal); Exocide FC (EDDM), su bazlı ürünlerin tam teneke içi ve baş boşluğu koruması için geliştirilmiş, su bazlı düşük toksisiteli 

formaldehit verici biyosittir. Exocide FC (EDDM), gram pozitif ve gram negatif bakteriler, maya ve mantarlar dahil olmak üzere çok çeşitli mikroorganizmalara karşı etkilidir. 

Mikroorganizmalar hızlı bir oranda ve doğru biyosit, sayılar önemli ölçüde artabilir. Bakteriyel ve fungal kontaminasyonun bir sonucu olarak boyalarda, polimerde ve yapıştırıcılarda In-Can bozunması şunlara neden olabilir:

• Viskozite kaybı

• Gazlanma

• Renk değişikliği

• Kötü kokular

• Ürün yüzeyinde mantar oluşumu

• Ürün bölme

• Yapışma kaybı

• Üretim temizleme ve üretim durma süresi

• Kar kaybı

Uygulamalar;

Exocide FC / (ethylenedioxy) dimetanol, su bazlı yapıştırıcılar, polimer emülsiyonları dahil çok çeşitli uygulamaların korunması için tavsiye edilir; su bazlı dekoratif boyalar, metal işleme sıvıları ve yapı kimyasalları. Ürünler mantarlar tarafından yüzey kontaminasyonuna eğilimli olduğunda ve baş boşluğu koruması gerektiğinde, Nipacide FC tercih edilen biyositlerden biri olmalıdır. Exocide FC, çok çeşitli bozulma organizmalarına karşı etkilidir.

Düzey kullanın;

Exocide FC / (etilendioksi) dimetanol, bitmiş ürünlerde% 0.10 ile% 0.30 arasındaki seviyelerde değerlendirilmelidir. Nipacide FC'nin bir formaldehit verici biyosit olduğunu ve tek tek ürünlerdeki serbest formaldehit seviyelerinin çeşitli parametrelere bağlı olarak değişeceğini lütfen unutmayın. Serbest formaldehit seviyesiyle ilgili endişeleriniz varsa, bunun bitmiş üründe kontrol edilmesi önerilir.

ürün. Exocide FC, formaldehitin yavaş salınımı ile kap içinde yüzey mantar kontaminasyonunu önlemede özellikle etkilidir.

(Etilendioksi) Dimetanol

IUPAC Adı 2- (hidroksimetoksi) etoksimetanol

Eşanlamlılar (etilendioksi) dimetanol; 1,6-Dihidroksi-2,5-dioksiheksan; Metanol, 1,2-etandiilbis (oksi) bis-; 1,2-ETHANDIYLBIS (OXY) BISMETHANOL; [1,2-ethandiilbis (oxy) ] bis-Metanol; etilen glikol dimetanol eter; 2 (hidroksimetoksi) etoksimetanol; 2-metiloloksietoksim

(etilendioksi) dimetanol

EDDM

EC / Liste no .: 222-720-6

CAS no .: 3586-55-8

Mol. formül: C4H10O4

1,6-dihidroksi-2,5-dioksahekzan

Nipacide FC

Exocide FC

1. Saflık% 90'dan fazla ， daha az koku。

2. Su bazlı metal işleme sıvısı, boya, yapıştırıcılar ve diğer ürünler için uygun, düşük toksisiteli ve yüksek verimli bir tür geniş spektrumlu bakterisit.

3. Hızlı etki, iyi stabilite, daha yüksek yağda çözünür, ciltte olmayan hassasiyet, bakterileri ve mantarları bir dereceye kadar etkili bir şekilde sınırlayabilir ， 

Bakteri direncini önleyin.

Biyosidal aktif maddeler

Metanol, 1,1 '- [1,2-etandiilbis (oksi)] bis-

IUPAC isimleri

1,2-Bis (hidroksimetoksi) etan

1,6-Dihidroksi-2,5-dioksahekzan

2- (hidroksimetoksi) etoks