1-9 A-D E-G H-M N-P Q-S T-Z

EMULSOGEN TS 160

EMULSOGEN TS 160

 

CAS No. : 99734-09-5
EC No. : 935-429-0

 

 

Synonyms:
Tristyrylphenol-Polyglycolether with approximately 16 moles ethylene oxide; Tristyryl Phenol Ethoxylates; Ethoxylated Tristyrylphenol; Nonionic Surfactant 600 series; Pesticide Emusifier 600 series; Polyethylene Glycol Mono(tristyrylphenyl)ether; Ethoxylated polyarylphenol; Soprophor BSU; Soprofor 40; SINOPOL 609; Poly(oxy-1,2-ethanediyl), alpha-(tris(1-phenylethyl)phenyl)-omega-hydroxy-; Poly(oxy-1,2-ethanediyl),R-[tris(1-phenylethyl)- phenyl]-hydroxy-

 

 


Emulsogen TS 160

 

 

Agent mouillant et dispersant non ionique pour pigments organiques dans les dispersions, préparations et revêtements
Composition
Tristyrylphénol-Polyglycolether avec environ 16 moles d'oxyde d'éthylène
Propriétés du produit *)
Teneur en substance active
environ 100%
Ionicité
non ionique
Apparence
à 25 ° C: liquide jaunâtre
à 5 ° C: cire jaunâtre
Valeur pH (DIN EN 1262), 1% dans l'eau
5 - 7
Solubilité à 25 ° C
soluble dans l'eau
Densité à 50 ° C
environ. 1,1 g / cm³
Point d'éclair (DIN / ISO 2592)
> 100 ° C
Les biocides
exempt de tout biocide supplémentaire
Utilisation
Emulsogen TS 160 a une valeur HLB d'environ 13 et est utilisé pour les dispersions aqueuses de pigments, les préparations, les peintures et les revêtements.
Utilisation dans les préparations pigmentaires
Emulsogen TS 160 convient aux pigments organiques et au noir de carbone pour produire des préparations de pigments stables et fluides à haute teneur en solides et à faible viscosité.
Dosage: 15-30% à base de pigments
Utilisation dans les peintures et revêtements
Emulsogen TS 160 améliore la compatibilité des pigments et des minéraux avec les polymères et les liants. Emulsogen TS 160 améliore la durée de conservation et la stabilité des peintures en émulsion.
Dosage: 0,3 - 1,0% basé sur la formulation de la peinture

 

 


Emulsogen TS 160

 

 

Nonionic wetting and dispersing agent for organic pigments in dispersions, preparations and coatings
Composition
Tristyrylphenol-Polyglycolether with approximately 16 moles ethylene oxide
Product properties *)
Active substance content
about 100 %
Ionicity
nonionic
Appearance
at 25 °C: yellowish liquid
at 5 °C: yellowish wax
pH value (DIN EN 1262), 1% in water
5 - 7
Solubility at 25 °C
soluble in water
Density at 50 °C
approx. 1.1 g/cm³
Flash point (DIN/ISO 2592)
> 100 °C
Biocides
free of any additional biocide
Use
Emulsogen TS 160 has a HLB value of about 13 and is used for aqueous pigment dispersions, preparations, paints and coatings.
Use in pigment preparations
Emulsogen TS 160 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents and with low viscosities.
Dosage: 15 - 30% based on pigments
Use in paints and coatings
Emulsogen TS 160 improves the compatibility of pigments and minerals with polymers and binders. Emulsogen TS 160 improves the shelf life and stability of emulsion paints.
Dosage: 0,3 - 1,0 % based on the paint formulation

 

 


Emulsogen TS 160

 

 

Dispersiyonlar, preparatlar ve kaplamalardaki organik pigmentler için noniyonik ıslatıcı ve dispersiyon ajanı
Kompozisyon
Yaklaşık 16 mol etilen oksit içeren tristirilfenol-Poliglikoleter
Ürün özellikleri *)
Aktif madde içeriği
yaklaşık 100 %
İyoniklik
noniyonik
Görünüm
25 ° C'de: sarımsı sıvı
5 ° C'de: sarımsı mum
pH değeri (DIN EN 1262), suda% 1
5 - 7
25 ° C'de çözünürlük
suda çözünebilir
50 ° C'de yoğunluk
yakl. 1,1 g / cm³
Parlama noktası (DIN / ISO 2592)
> 100 ° C
Biyositler
herhangi bir ek biyosit içermez
Kullanım
Emulsogen TS 160, yaklaşık 13'lük bir HLB değerine sahiptir ve sulu pigment dispersiyonları, preparatlar, boyalar ve kaplamalar için kullanılır.
Pigment preparatlarında kullanım
Emulsogen TS 160, organik pigmentler ve karbon siyahı için yüksek katı içerikli ve düşük viskoziteli stabil, serbest akışlı pigment preparatları üretmek için uygundur.
Dozaj: Pigmentlere göre% 15 - 30
Boya ve kaplamalarda kullanın
Emulsogen TS 160, pigment ve minerallerin polimerler ve bağlayıcılarla uyumluluğunu geliştirir. Emulsogen TS 160, emülsiyon boyaların raf ömrünü ve stabilitesini artırır.
Dozaj: Boya formülasyonuna göre% 0,3 - 1,0

 

 


Эмульсоген TS 160

 

 

Неионный смачивающий и диспергирующий агент для органических пигментов в дисперсиях, препаратах и ​​покрытиях.
Сочинение
Тристирилфенол-полигликолевый эфир с приблизительно 16 моль оксида этилена
Свойства продукта *)
Содержание активного вещества
около 100%
Ионность
неионогенный
Внешность
при 25 ° C: желтоватая жидкость
при 5 ° C: желтоватый воск
Значение pH (DIN EN 1262), 1% в воде
5-7
Растворимость при 25 ° C
растворим в воде
Плотность при 50 ° C
ок. 1,1 г / см³
Температура вспышки (DIN / ISO 2592)
> 100 ° С
Биоциды
без дополнительных биоцидов
Использовать
Emulsogen TS 160 имеет значение HLB около 13 и используется для водных дисперсий пигментов, препаратов, красок и покрытий.
Использование в пигментных препаратах
Emulsogen TS 160 подходит для органических пигментов и технического углерода для получения стабильных, сыпучих пигментных препаратов с высоким содержанием твердых частиц и с низкой вязкостью.
Дозировка: 15-30% в зависимости от пигментов.
Использование в красках и покрытиях
Emulsogen TS 160 улучшает совместимость пигментов и минералов с полимерами и связующими веществами. Emulsogen TS 160 увеличивает срок хранения и стабильность эмульсионных красок.
Дозировка: 0,3 - 1,0% в зависимости от рецептуры краски.

 

Ataman Chemicals © 2015 All Rights Reserved.