1-9 A-D E-G H-M N-P Q-S T-Z

GENAPOL PF 80 FP


Genapol PF 80, ÉMULSIFICATEUR NONIONIQUE POUR LA POLYMÉRISATION À ÉMULSION. Genapol PF 80 est utilisé comme émulsifiant non ionique pour la polymérisation en émulsion de monomères comme les acrylates, les styrène-acrylates et l'acétate de vinyle. Genapol PF 80 est un dispersant porogène et plastifiant pour enduits, mortiers et mastics à base de ciment, chaux ou gypse

Avantages
L'utilisation de Genapol PF 080 offre les avantages suivants:

Propriétés du produit:

faible teneur en COV
sans éthoxylates d'alkylphénol (APEO)
facilement biodégradable
sans étiquette de danger
Approuvé par la FDA


Performances en polymérisation en émulsion:

maintient une faible viscosité de l'émulsion de polymère à différents taux de cisaillement
meilleure stabilité de l'électrolyte
durée de conservation améliorée (stabilité élevée au gel et dégel)
résultats de polymérisation similaires aux APEO

Groupe de produits: copolymère bloc EO / PO
Contenu actif: 100%
Apparence: cire blanche
Valeur pH: 7
Solubilité: 1% dans l'eau: solution claire
Viscosité: env. 900 à 1 500 mPas
Point de fusion: env. 58 ° C
Point d'éclair:> 250 ° C
Valeur HLB: env. 16

Composition
Copolymère séquencé d'oxyde de propylène et d'oxyde d'éthylène, contenant 80% p / p d'oxyde d'éthylène
Propriétés du produit *)
Poids moléculaire [g / mol]: env. 8 000
Concentration [%]: env. 100
Aspect à 20 ° C: cire blanche / pastille ou poudre
Ionicité: non ionique
Viscosité du produit fondu à 70 ° C [mPas]: 900 - 1500
Valeur pH (solution aqueuse à 1%): environ 7,0
Solubilité à 20 ° C
1% dans l'eau: solution claire
10% en huile minérale: solution trouble
10% dans le xylène: solution trouble
Point de fusion [° C]: env. 58 ° C
Point d'éclair [° C]:> 250 ° C
Point de trouble (1 g dans 100 ml de solution de NaCl à 10%) [° C]: env. 70
Valeur HLB: env. 16

GENAPOL PF 80
Composition et propriétés

Produit de polymérisation d'aspect oxyde de propylène et oxyde d'éthylène - poudre blanche
charge - non ionique
réaction - presque neutre

résistance à la dureté de l'eau - très bonne
alcali - bon
acides - bon
électrolytes - bon

Genapol PF 80 (poudre fine)
granulométrie> 500 µm - max ... 20%
granulométrie> 800 µm - max. 0,8%

Genapol PF 80 P (poudre)
granulométrie <200 µm - max. 25%
granulométrie 200 - 400 µm - 35 - 55%
granulométrie 400 - 630 µm - 25 - 45%
granulométrie> 630 µm - max. quinze %

Dosage

0,01-0,05% en poids pour un mélange de construction sec.

Champ d'application

Genapol PF 80 est un dispersant porogène et plastifiant pour enduits, mortiers et mastics à base de ciment, de chaux ou de gypse. Genapol PF 80 améliore la capacité de traitement, la douceur et le lissé de surface des matériaux de construction. La dispersion de fines particules de liants minéraux et de pigments est assurée et l'adhésivité des pansements et des solutions contenant de la méthylcellulose sur l'instrument est réduite.
Avec Genapol PF 80, la formation de grumeaux dans les enduits de plâtre est réduite et le temps de traitement est considérablement allongé. Genapol PF 80 est compatible avec tous les tensioactifs anioniques et non ioniques ainsi que les méthylcelluloses Mecellose. La formation de pores d'air avec Genapol PF 80 dépend de la composition des mélanges de construction respectifs et du temps et de l'intensité du mélange.

Compatibilité
Genapol PF 80 peut être utilisé en association avec d'autres tensioactifs non ioniques, anioniques et cationiques. Genapol PF 80 résiste à la dureté de l'eau, aux sels métalliques et aux acides et alcalis aux concentrations normalement utilisées. Des tests préliminaires sont nécessaires.

Utilisation
Genapol PF 80 a une bonne action de mouillage et de dispersion associée à une faible tendance à la mousse.
Genapol PF est utilisé comme tensioactif faiblement moussant avec une très bonne action dispersante dans les poudres détergentes et nettoyantes. Ceux-ci peuvent être produits simplement en mélangeant les composants en poudre.
Genapol PF 80 est également utilisé comme émulsifiant peu moussant dans la polymérisation en émulsion et comme agent dispersant pour les pâtes et préparations pigmentaires.
D'autres applications incluent les réactions dans l'industrie chimique.

Espace de rangement
Genapol PF 80 peut être conservé pendant au moins 2 ans dans les récipients d'origine scellés à température ambiante dans les conditions recommandées.
Genapol PF 80 ne subit aucun changement dans les propriétés du produit lorsqu'il est exposé au froid pendant le transport et le stockage.

Genapol PF 80 est également fourni sous forme de billes très fines. C'est un choix approprié pour les détergents et nettoyants en poudre si les tensioactifs ne peuvent pas être pulvérisés dans un liquide ou une pâte à partir de. Il est facile à mélanger avec d'autres poudres et présente l'avantage supplémentaire d'éviter la formation de poussière.
Il peut être utilisé pour disperser les sels de calcium et de magnésium en suspension et pour enlever et disperser la terre dans des bains de décapage acides. Parce qu'il n'est pas ionique, il peut être utilisé pour nettoyer le métal par électrolyse.
Il peut également être utilisé pour solubiliser les huiles essentielles et pour émulsionner les monomères





Genapol PF 80, EMULSIFICADOR NO IÓNICO PARA POLIMERIZACIÓN DE EMULSIONES. Genapol PF 80 se utiliza como emulsionante no iónico para la polimerización en emulsión de monómeros como acrilatos, estireno-acrilatos y acetato de vinilo. Genapol PF 80 es un dispersante y plastificante formador de poros para revoques, morteros y masillas a base de cemento, cal o yeso

Beneficios
El uso de Genapol PF 080 ofrece las siguientes ventajas:

Propiedades del producto:

bajo VOC
libre de etoxilatos de alquilfenol (APEO)
fácilmente biodegradable
etiqueta de peligro libre
Aprobado por la FDA


Rendimiento en polimerización en emulsión:

mantiene la baja viscosidad de la emulsión de polímero a diferentes velocidades de cizallamiento
estabilidad de electrolitos mejorada
vida útil mejorada (alta estabilidad de congelación y descongelación)
resultados de polimerización similares a los APEO

Grupo de productos: copolímero de bloque EO / PO
Contenido activo: 100%
Apariencia: cera blanca
valor de pH: 7
Solubilidad: 1% en agua: solución transparente
Viscosidad: aprox. 900 - 1500 mPas
Punto de fusión: aprox. 58 ° C
Punto de inflamación:> 250 ° C
Valor HLB: aprox. dieciséis

Composición
Copolímero de bloque de óxido de propileno y óxido de etileno, que contiene 80% p / p de óxido de etileno
Propiedades del producto *)
Peso molecular [g / mol]: aprox. 8000
Concentración [%]: aprox. 100
Aspecto a 20 ° C: cera blanca / pellet o polvo
Ionicidad: no iónico
Viscosidad del producto fundido a 70 ° C [mPas]: 900 - 1500
Valor de pH (solución acuosa al 1%): aproximadamente 7,0
Solubilidad a 20 ° C
1% en agua: solución transparente
10% en aceite mineral: solución turbia
10% en xileno: solución turbia
Punto de fusión [° C]: aprox. 58 ° C
Punto de inflamación [° C]:> 250 ° C
Punto de enturbiamiento (1 g en 100 ml de solución de NaCl al 10%) [° C]: aprox. 70
Valor HLB: aprox. dieciséis

GENAPOL PF 80
Composición y propiedades

Producto de polimerización de óxido de propileno y aspecto de óxido de etileno - polvo blanco
carga - no iónico
reacción - casi neutral

resistencia a la dureza del agua - muy buena
álcali - bueno
ácidos - bueno
electrolitos - bueno

Genapol PF 80 (polvo fino)
tamaño de partícula> 500 µm - máx ... 20%
tamaño de partícula> 800 µm - máx. 0,8%

Genapol PF 80 P (polvo)
tamaño de partícula <200 µm - máx. 25%
tamaño de partícula 200 - 400 µm - 35 - 55%
tamaño de partícula 400 - 630 µm - 25 - 45%
tamaño de partícula> 630 µm - máx. quince %

Dosis

0.01-0.05% en peso para mezcla de construcción seca.

Área de aplicación

Genapol PF 80 es un dispersante y plastificante formador de poros para revoques, morteros y masillas a base de cemento, cal o yeso. Genapol PF 80 mejora la procesabilidad, la suavidad y la tersura superficial de los materiales de construcción. Se asegura la dispersión de partículas finas de aglutinantes minerales y pigmentos y se reduce la pegajosidad de los emplastos y soluciones que contienen metilcelulosa en el instrumento.
Con Genapol PF 80, se reduce la formación de grumos en revoques de yeso y se prolonga significativamente el tiempo de procesamiento. Genapol PF 80 es compatible con todos los tensioactivos aniónicos y no iónicos, así como mecelosas metilcelulosas. La formación de poros de aire con Genapol PF 80 depende de la composición de las respectivas mezclas de construcción y del tiempo y la intensidad de la mezcla.

Compatibilidad
Genapol PF 80 se puede utilizar en combinación con otros tensioactivos no iónicos, aniónicos y catiónicos. Genapol PF 80 es resistente a la dureza del agua, las sales metálicas y a los ácidos y álcalis en las concentraciones normalmente utilizadas. Se requieren pruebas preliminares.

Utilizar
Genapol PF 80 tiene una buena acción humectante y dispersante junto con una baja tendencia a la formación de espuma.
Genapol PF se utiliza como tensioactivo poco espumoso con muy buena acción dispersante en detergentes y agentes limpiadores en polvo. Estos se pueden producir simplemente mezclando los componentes del polvo.
Genapol PF 80 también se utiliza como emulsionante de baja espuma en la polimerización en emulsión y como agente dispersante para pastas y preparaciones de pigmentos.
Otras aplicaciones incluyen reacciones en la industria química.

Almacenamiento
Genapol PF 80 se puede almacenar durante al menos 2 años en envases originales sellados a temperatura ambiente en las condiciones recomendadas.
Genapol PF 80 no sufre ningún cambio en las propiedades del producto cuando se expone al frío durante el transporte y almacenamiento.

Genapol PF 80 se suministra también en forma de perlas muy finas. Es una opción adecuada para detergentes y limpiadores en polvo si los surfactantes no se pueden rociar en líquido o pasta. Es fácil de mezclar con otros polvos y tiene la ventaja adicional de prevenir la formación de polvo.
Se puede utilizar para dispersar sales de calcio y magnesio en suspensión y para eliminar y dispersar la suciedad en baños de decapado ácido. Debido a que es no iónico, se puede utilizar para limpiar metales electrolíticamente.
También se puede emplear para solubilizar aceites esenciales y emulsionar monómeros. 
GENAPOL PF 80 FP

CAS No. : 9003-11-6

 

Synonyms:
2-methyloxirane; oxirane ; EO-PO block polymer with 80 % EO, Genapol PF 80, Pluronic PE 6800
106392-12-5, 11104-97-5, 1,2-Propyleneglycol, ethoxylated and propoxylated, 2-methyloxirane; oxirane, 53637-25-5, 60407-69-4, 65187-10-2, 69070-95-7, 75-H-1400, 75H90000, 9003-11-6, Adeka 25R1, Adeka 25R2, Adeka L 61, Adeka Pluronic F 108, AIDS162017, AIDS-162017, alpha-Hydro-omega-hydroxypoly(oxyethylene)a-poly(oxopropylene)b-poly(oxyethylene)a block copolymer, .alpha.-Hydro-.omega.-hydroxypoly(oxyethylene)poly(oxypropylene)poly(oxyethylene) block copolymer, alpha-Hydro-omega-hydroxypoly(oxyethylene)(sub a)-poly(oxopropylene)(sub b)-poly(oxyethylene)(sub a) block copolymer, Antarox 17R4, Antarox 25R2, Antarox B 25, Antarox F 108, Antarox F 68, Antarox F 88, Antarox F 88FL, Antarox L 61, Antarox L 72, Antarox P 104, Antarox P 84, Antarox SC 138, Arcol E 351, Arco Polyol R 2633, B 053, BASF-L 101, Berol TVM 370, Bloat Guard, Block polyethylene-polypropylene glycol, Block polyoxyethylene-polyoxypropylene, Breox BL 19-10, BSP 5000, C10H22O3, C5H10O2, Cirrasol ALN-WS, component of Casakol, component of Epitrate, Crisvon Assistor SD 14, Crl 1005, CRL 1605, CRL 8131, CRL 8142, D01941, D06502, D 500 (polyglycol), Daltocel F 460, Dehypon KE 3557, Detalan, Eban 710, Emkalyx EP 64, Emkalyx L101, Emkalyx L 101, Empilan P 7068, Emulgen PP 230, Epan 450, Epan 485, Epan 710, Epan 750, Epan 785, Epan U 108, Epon 420, Ethylene glycol-propylene glycol block copolymer, Ethylene glycol-propylene glycol polymer, ethylene oxide; propylene oxide, Ethylene oxide-propylene oxide block copolymer dipropylene glycol ether, Ethylene oxide-propylene oxide block copolymer ether with ethylene glycol, Ethylene oxide-propylene oxide block polymer, ETHYLENE OXIDE, PROPYLENE OXIDE BLOCK POLYMER, Ethylene oxide-propylene oxide copolymer, Exocorpol, Exocorpol (TN), F 108, F-108, F 127, F 77, F 87, F 88, Genapol PF 10, Glycols, polyethylenepolypropylene, Glycols, polyethylene-polypropylene, HSDB 7222, Hydrowet, Laprol 1502, LG 56, LS-101081, LS-72949, Lutrol F, Lutrol F (TN), M 90/20, Magcyl, Meroxapol 105, Methyloxirane-oxirane copolymer, Methyloxirane-oxirane polymer, Methyloxirane polymer with oxirane block, Monolan 8000E80, Monolan PB, N 480, Newpol PE-88, Niax 16-46, Niax LG 56, Nissan Pronon 201, Nixolen SL 19, NSC63908, NSC 63908, Oligoether L-1502-2-30, Oxirane-methyloxirane polymer, Oxirane, methyl-, polymer with oxirane, Oxirane, methyl-, polymer with oxirane, block, Oxirane, methyl-, polymer with oxirane, ether with 1,2-propanediol (2:1), Oxirane, polymer with methyloxirane, Oxyethylene Oxypropylene Polymer, P 103, P 104, P 105, P 123, P 65, P 84, P 85, PEG/PPG-125/30 Copolymer, Plonon 201, Plonon 204, Pluracare, Pluracol V, Pluriol PE, Pluriol PE 6810, Pluronic, Pluronic 10R8, Pluronic 31R2, Pluronic-68, Pluronic C 121, Pluronic F, Pluronic F108, Pluronic F 108, Pluronic F 125, Pluronic F127, Pluronic F 127, Pluronic F 38, Pluronic F68, Pluronic F 68, Pluronic F-68, Pluronic F 68LF, Pluronic F77, Pluronic F86, Pluronic F87, Pluronic F 87, Pluronic F87-A7850, Pluronic F88, Pluronic F 88, Pluronic F 98, Pluronic L, Pluronic L 101, Pluronic L-101, Pluronic L 121, Pluronic L 122, Pluronic L 24, Pluronic L 31, Pluronic L 35, Pluronic L44, Pluronic L 44, Pluronic L 61, Pluronic L62, Pluronic L 62, Pluronic l62(mw 2500), Pluronic L64, Pluronic L 64, Pluronic l64(mw 2900), Pluronic L 68, Pluronic L-81, Pluronic L 92, Pluronic P, Pluronic P103, Pluronic P104, Pluronic P 104, Pluronic P105, Pluronic P123, Pluronic P65, Pluronic P-65, Pluronic P 75, Pluronic P-75, Pluronic P84, Pluronic P85, Pluronic P 85, Poloxalene, Poloxalene 2930, Poloxalene L64, Poloxalene [USAN:BAN:INN], Poloxalene [USAN:INN:BAN], Poloxalkol, POLOXAMER, Poloxamer 101, Poloxamer 108, Poloxamer 182LF, Poloxamer 188, Poloxamer-188, Poloxamer 331, Poloxamer 407, Poloxamer (NF), Poloxamer [USAN:BAN:INN], Polyethylene glycol, propoxylated, Poly(ethylene oxide-co-propylene oxide), Polyethylene oxide-polypropylene oxide, Polyethylene oxide-polypropylene oxide copolymer, Polyethylene-Pluronic L-62LF, Polyethylene-polypropylene glycol, Polykol, Polylon 13-5, Poly(mixed ethylene, propylene)glycol, Polyoxamer 108, Polyoxyethylenated poly(oxypropylene), Polyoxyethylene (160) polyoxypropylene (30) glycol, Polyoxyethylene-oxy-propylene [French], Polyoxyethylene polyoxypropylene, Polyoxyethylene-polyoxypropylene, Polyoxyethylene - polyoxypropylene block copolymer, Polyoxyethylene - polyoxypropylene copolymer, Poly(oxyethylene)-poly(oxypropylene) glycol, Poly(oxyethylene)-poly(oxypropylene) polymer, Polyoxyethylene-polyoxypropylene polymer, Polyoxyethylene Polyoxypropylene Polyoxyethylene Polymer, Polyoxypropylene-polyoxyethylene block copolymer, Polypropoxylated, polyethoxylated propylene glycol, Polypropylene glycol, ethoxylated, Polypropylene glycol-ethylene oxide copolymer, Poly(propylene oxide-ethylene oxide), PPG Diol 3000EO, Proksanol, Pronon, Pronon 102, Pronon 104, Pronon 201, Pronon 204, Pronon 208, Propane-1,2-diol, ethoxylated, propoxylated, Propylene glycol, propylene oxide, ethylene oxide polymer, Propylene oxide-ethylene oxide copolymer, Propylene oxide-ethylene oxide polymer, Propylen M 12, Proxanol, Proxanol 158, Proxanol 228, Proxanol Tsl-3, RC 102, Regulaid, Rokopol 16P, Rokopol 30P, Rokopol 30P9, SK & F 18,667, SK&F 18,667, SK&F-18667, Slovanik, Slovanik 630, Slovanik 660, Slovanik M-640, Supronic B 75, Supronic E 400, Synperonic PE 30/40, TERGITOL, Tergitol monionic XH, Tergitol nonionic XH, Tergitol XH, Tergitol XH (nonionic), Teric PE40, Teric PE60, Teric PE 61, Teric PE 62, Teric PE70, Thanol E 4003, Therabloat, TsL 431, TVM 370, Unilube 50MB168X, Unilube 50MB26X, Velvetol OE 2NT1, Voranol P 2001, WS 661, Wyandotte 7135 Methyl oxirane polymer with oxirane, Ethoxylated polyoxypropylene f98;PEOPO;rc102;PLURONIC;75-h-1400;Poloxamer;9003-11-6;poloxalene;poloxalkol;pluronicf98 Polyethylene-polypropylene glycol
Ethylene glycol polyethylene-polypropylene glycol ether (1:2) Ethylene glycol - propylene glycol copolymer; GENAPOL ED 3060; Genapol ED 3060; 2-[1-[1-[2-[bis[2-[2-(2-hydroxyethoxy)propoxy]propyl]amino]ethyl-[2-[2-(2hydroxyethoxy) propoxy] propyl] amino]propan-2-yloxy]propan-2-yloxy]ethanol; ETHYLENEDIAMINE TETRAKIS(ETHOXYLATE-BLOCK-PROPOXYLATE) TETROL;1,2-Ethanediamine, methyloxirane, oxiranepolymer; 1,2 Ethanediamine, polymerwithmethyloxiraneandoxirane; Ethoxylated,propoxylatedethylenediamine; ethylenediaminetetrakis(ethoxylate-b-propoxylate; ETHY; cas : 26316-40-5; cas 26316-40-5; cas no: 26316-40-5; cas no: 26316-40-5; Ethylenediamine, ethoxylated and propoxylated; UNII-33F4HZ53CP; 1,2-Ethanediamine propylene oxide ethylene oxide polymer; 26316-40-5; Ethoxylated, propoxylated ethylenediamine; 1,2 Ethanediamine, polymer with 2-methyloxirane and oxirane; Ethylenediamine, ethoxylated and propoxylated; EC 500-047-1; 1,2-Ethanediamine, methyloxirane, oxirane polymer; 33F4HZ53CP; SCHEMBL180907141,2-Ethanediamine, polymer with methyloxirane and oxirane; Ethylene oxide-propylene oxide copolymer ethylenediamine ether; 1, 2-Ethanediamine, polymer with methyl oxirane and oxirane, minimum number average molecular weight (in amu), 1,100; GENAPOL ED 3060; Genapol ED 3060; ETHYLENEDIAMINE TETRAKIS(ETHOXYLATE-BLOCK-PROPOXYLATE) TETROL;1,2-Ethanediamine,methyloxirane,oxiranepolymer;1,2 Ethanediamine, polymerwithmethyloxiraneandoxirane; Ethoxylated,propoxylatedethylenediamine; ethylenediaminetetrakis(ethoxylate-b-propoxylate; ETHY; cas : 26316-40-5; cas 26316-40-5; cas no: 26316-40-5; cas no: 26316-40-5; Ethylenediamine, ethoxylated and propoxylated; UNII-33F4HZ53CP; 1,2-Ethanediamine propylene oxide ethylene oxide polymer; 26316-40-5; Ethoxylated, propoxylated ethylenediamine; 1,2 Ethanediamine, polymer with 2-methyloxirane and oxirane; Ethylenediamine, ethoxylated and propoxylated; EC 500-047-1; 1,2-Ethanediamine, methyloxirane, oxirane polymer; GENAPOL ED 3060; Genapol ED 3060; 2-[1-[1-[2-[bis[2-[2-(2-hydroxyethoxy)propoxy]propyl]amino]ethyl-[2-[2-(2hydroxyethoxy) propoxy] propyl] amino] propan-2-yloxy]propan-2-yloxy]ethanol; ETHYLENEDIAMINE TETRAKIS(ETHOXYLATE-BLOCK-PROPOXYLATE) TETROL;1,2Ethanediamine, methyloxirane,oxiranepolymer;1,2 Ethanediamine, polymerwithmethyloxiraneandoxirane; Ethoxylated,propoxylatedethylenediamine; ethylenediaminetetrakis(ethoxylate-b-propoxylate; ETHY; cas : 26316-40-5; cas 26316-40-5; cas no: 26316-40-5; cas no: 26316-40-5; Ethylenediamine, ethoxylated and propoxylated; UNII-33F4HZ53CP; 1,2-Ethanediamine propylene oxide ethylene oxide polymer; 26316-40-5; Ethoxylated, propoxylated ethylenediamine; 33F4HZ53CP; SCHEMBL180907141,2-Ethanediamine, polymer with methyloxirane and oxirane; Ethylene oxide-propylene oxide copolymer ethylenediamine ether; 1, 2-Ethanediamine, polymer with methyl oxirane and oxirane, minimum number average molecular weight (in amu), 1,100; genapol 3060 ed; genapol ed; genapol ed 3060 ; genapol ed3060 ; genapoled 3060 ; genapoled3060 ; genapol ed-3060 ; GENALPOL ED 3060; GENAPOL; Genapol PF 80 Powder; GENAPOL PF 80 FP; Genapol PF 80; GENAPOL PF 80 POWDER; GENAPOL PF 80 FP; GENAPOL PF 80; GENAPOL PF-80 POWDER; GENAPOL PF 80-FP; GENAPOL PF-80; GENAPOL FP 80 POWDER; GENAPOL PF 80 FP; GENAPOL FP 80; GENAPOL FP -80 POWDER; GENAPOL FP 80-FP; GENAPOL FP -80; genapol pf 80 powder; genapol pf 80 fp; genapol pf 80; genapol pf-80 powder; genapol pf 80-fp; genapol pf-80; genapol fp 80 powder; genapol pf 80 fp; genapol fp 80; genapol fp -80 powder; genapol fp 80-fp; genapol fp -80; Genapol Pf 80 Powder; Genapol Pf 80 Fp; Genapol Pf 80; Genapol Pf-80 Powder; Genapol Pf 80-Fp; Genapol Pf-80; Genapol Fp 80 Powder; Genapol Pf 80 Fp; Genapol Fp 80; Genapol Fp -80 Powder; Genapol Fp 80-Fp; Genapol Fp -80; Zeospan 8100L; ZS 2185; ZSN 8100; ZSP 8100; GENAPOL PF 80 FP; Genapol PF 80 FP; GENAPOL pf 80 FP; Genapol PF 80 fp; genapol PF 80 FP; genapol PF 80 FP; GENAPOL PF 80 fp; Genapol PF80FP; GENAPOL PF 80 FP.; Genapol pf 80 fp; Genapol fp; Genapol pf; Genapol fp 80 ; Genapol pf 80; Genapol fp 80 pf; Genapol pf 80 fp

 

 

GENAPOL PF 80 FP

 

Genapol PF 80 FP
AGENT MOUILLANT
Genapol PF 80 FP est un polymère séquencé EO / PO.
Genapol PF 80 FP améliore l'ouvrabilité, la pénétration et le pouvoir liant des bétons / mortiers aux surfaces.
Avantages
Sans APEO

 

 

Poudre d'apparence
Substance active (environ) 100%
Description chimique Copolymère séquencé EO / PO

 

 

GENAPOL PF 80 FP
Agent mouillant non ionique pour l'industrie de la construction
COMPOSITION DE Genapol PF 80 FP
Copolymère séquencé d'oxyde de propylène et d'oxyde d'éthylène, contenant 80% p / p d'éthylène
oxyde
PROPRIÉTÉS DU Genapol PF 80 FP
Poids moléculaire DE Genapol PF 80 FP O Environ 8000 g / mole
Teneur en substance active d'environ 100%
Aspect de Genapol PF 80 FP à 20 ° C Poudre fine blanche
Valeur pH de Genapol PF 80 FP (DIN 53996), 1% dans l'eau 6 - 8
Densité de Genapol PF 80 FP à 70 ° C (DIN 51757) A propos de Genapol PF 80 FP 1,06 g / cm3
Viscosité de Genapol PF 80 FP à 70 ° C (DIN 53015) Environ 1200 mPa ∙ s
Point de fusion de Genapol PF 80 FP (DIN 51801) Environ 58 ° C
Solubilité dans l'eau Genapol PF 80 FP est soluble dans l'eau froide et chaude.
Valeur HLB Environ 16
*) Ces caractéristiques sont fournies à titre indicatif uniquement et ne doivent pas être considérées comme des spécifications de produit. Les tolérances sont données dans le
fiche technique du produit. Pour plus d'informations sur les propriétés du produit, les données toxicologiques, écologiques et de sécurité, veuillez vous référer au
fiche de données de sécurité.
UTILISATION DU Genapol PF 80 FP
Genapol PF 80 FP est utilisé comme agent mouillant pour les mélanges solides dans la construction
industrie. Genapol PF 80 FP est appliqué pour les enduits et mortiers à base de ciment, gypse
ou de la chaux.
Genapol PF 80 FP a les propriétés suivantes:
- Mouillage amélioré des fines particules de plâtre ou de mortier sec
- Plastification et ouvrabilité améliorée du plâtre ou du mortier
- Améliore les performances du plâtre ou du mortier et fait gagner du temps
NIVEAUX D'ADDITION
0,005 - 0,025% sur la base du mélange de mortier sec

 

La poudre Genapol PF 80 FP est un tensioactif non ionique à faible mousse pour l'industrie chimique. Cette poudre blanche peut être utilisée en combinaison avec d'autres tensioactifs non ioniques, anioniques et cationiques. La poudre Genapol PF 80 FP résiste aux sels de dureté de l'eau et aux acides et alcalis aux concentrations normalement utilisées. La poudre Genapol PF 80 FP a une bonne action de mouillage et de dispersion associée à une faible tendance à mousser.

 

La poudre Genapol PF 80 fp est utilisée comme tensioactif peu moussant avec une très bonne action dispersante dans les poudres détergentes et détergentes. Ceux-ci peuvent être produits simplement en mélangeant les composants en poudre. La poudre Genapol PF 80 FP est également utilisée comme émulsifiant peu moussant dans la polymérisation en émulsion et comme agent dispersant pour les pâtes et préparations pigmentaires.
 

 

 


GENAPOL PF 80 FP

 

 

Genapol PF 80 FP
WETTING AGENT
Genapol PF 80 FP is a EO/PO block polymer. 
Genapol PF 80 FP enhances the workability, penetration and binding power of concretes/mortars to surfaces.
Benefits
APEO-free

 

Genapol PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol PF 80 FP powder is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. Genapol PF 80 FP Powder has good wetting and dispersing action coupled with low foaming tendency.

Genapol PF 80 FP powder is used as a low-foaming surfactant with very good dispersing action in detergent and cleaning agent powders. These can be produced simply by mixing the powder components. Genapol PF 80 FP powder is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations.

Genapol PF 80 FP dispersed in the building industry and the wetting agent material is used as agent. Propylene oxide and ethylene oxide is polymerized product.

 

Genapol PF 80 FP is a nonionic emulsifier recommended for:
Styrene/acrylate dispersions
Acrylate dispersions
Vinyl acetate dispersions

 

 

Appearance Powder
Active Substance (ca.) 100%
Chemical Description EO/PO block copolymer

 

 

GENAPOL PF 80 FP
Nonionic wetting agent for the construction industry
COMPOSITION OF Genapol PF 80 FP
Block copolymer of propylene oxide and ethylene oxide, containing 80% w/w ethylene
oxide
PRODUCT PROPERTIES OF Genapol PF 80 FP
Molecular weight OF Genapol PF 80 FP O About 8000 g/mole
Active substance content about 100 %
Appearance of Genapol PF 80 FP at 20°C White fine powder
pH value of Genapol PF 80 FP (DIN 53996), 1% in water 6 - 8
Density of Genapol PF 80 FP at 70°C (DIN 51757) About of Genapol PF 80 FP 1,06 g/cm3
Viscosity of Genapol PF 80 FP at 70°C (DIN 53015) About 1200 mPa∙s
Melting point of Genapol PF 80 FP (DIN 51801) About 58°C
Solubility in water Genapol PF 80 FP is soluble in cold and hot water.
HLB value About 16
*) These characteristics are for guidance only and are not to be taken as product specifications. The tolerances are given in the
product specification sheet. For further information on product properties, toxicological, ecological and safety data, please refer to the
safety data sheet.
USE OF Genapol PF 80 FP
Genapol PF 80 FP is used as a wetting agent for solid admixtures in the construction
industry. Genapol PF 80 FP is applied for plasters and mortars based on cement, gypsum
or lime.
Genapol PF 80 FP has the following properties:
- Improved wetting of the fine particles of the dry plaster or mortar
- Plastification and improved workability of the plaster or mortar
- Improves the performance of the plaster or mortar and saves time
ADDITION LEVELS
0,005 - 0,025% based on the dry mortar mixture

 

Genapol PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol PF 80 FP powder is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. Genapol PF 80 FP Powder has good wetting and dispersing action coupled with low foaming tendency.

Genapol PF 80 FP powder is used as a low-foaming surfactant with very good dispersing action in detergent and cleaning agent powders. These can be produced simply by mixing the powder components. Genapol PF 80 FP powder is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations.

Genapol PF 80 FP dispersed in the building industry and the wetting agent material is used as agent. Propylene oxide and ethylene oxide is polymerized product.

 

Genapol PF 80 FP is a nonionic emulsifier recommended for:
Styrene/acrylate dispersions
Acrylate dispersions
Vinyl acetate dispersions

 

 

GENAPOL PF 80 FP

 

Genapol PF 80 FP
ISLATICI
Genapol PF 80 FP, bir EO / PO blok polimeridir.
Genapol PF 80 FP, beton / harçların yüzeylere işlenebilirliğini, penetrasyonunu ve bağlama gücünü artırır.
Yararları
APEO içermeyen

 

 

Görünüm Pudra
Aktif Madde (yaklaşık)% 100
Kimyasal Tanım EO / PO blok kopolimer

 

 

GENAPOL PF 80 FP
İnşaat endüstrisi için noniyonik ıslatıcı
Genapol PF 80 FP'nin BİLEŞİMİ
% 80 w / w etilen içeren propilen oksit ve etilen oksit blok kopolimeri
oksit
Genapol PF 80 FP'nin ÜRÜN ÖZELLİKLERİ
Genapol PF 80 FP O'nun moleküler ağırlığı Yaklaşık 8000 g / mol
% 100 aktif madde içeriği
20 ° C'de Genapol PF 80 FP'nin görünüşü Beyaz ince toz
Genapol PF 80 FP'nin (DIN 53996) pH değeri, suda% 1-8
Genapol PF 80 FP'nin 70 ° C'de yoğunluğu (DIN 51757) Genapol PF 80 FP hakkında 1.06 g / cm3
Genapol PF 80 FP'nin 70 ° C'de viskozitesi (DIN 53015) Yaklaşık 1200 mPa ∙ s
Genapol PF 80 FP'nin (DIN 51801) erime noktası Yaklaşık 58 ° C
Suda çözünürlük Genapol PF 80 FP soğuk ve sıcak suda çözünür.
HLB değeri Yaklaşık 16
*) Bu özellikler yalnızca bilgilendirme amaçlıdır ve ürün özellikleri olarak kabul edilmemelidir. Toleranslar
ürün özellik sayfası. Ürün özellikleri, toksikolojik, ekolojik ve güvenlik verileri hakkında daha fazla bilgi için lütfen
Güvenlik Bilgi Formu.
KULLANIM
Genapol PF 80 FP, yapıdaki katı katkılar için ıslatıcı olarak kullanılır
endüstrisi. Genapol PF 80 FP, çimento, alçı esaslı sıvalar ve harçlar için uygulanır
altın kireç.
Genapol PF 80 FP aşağıdaki özelliklere sahiptir:
- Kuru sıva veya harçtaki ince parçacıkların ıslatılması
- Sıva veya harcın plastifikasyonu ve geliştirilmiş işlenebilirliği
- Sıva veya harç performansını arttırır ve zaman kazandırır
İLAVE SEVİYELER
Kuru harç karışımına göre% 0.005 - 0.025

 

 

Genapol PF 80 PF yapı endüstrisinde disperse edici ve ıslatıcı ajan olarak kullanılan malzemedir.Propilen oxide ve etilen oksitin polimerize edilmiş ürünüdür.
Genapol PF 80 FP nin tavsiye edildiği non-iyonik emülsiyonlaştırıcı :

 

 

Stiren / akrilat dispersiyonları
akrilat dispersiyonları
Vinil asetat dispersiyonlan

 

Genapol PF 80 FP Powder, kimya endüstrisi için düşük köpüklü, iyonik olmayan bir yüzey aktif maddedir. Bu beyaz toz, diğer noniyonik, anyonik ve katyonik yüzey aktif cisimleri ile kombinasyon halinde kullanılabilir. Genapol PF 80 tozu normalde kullanılan konsantrasyonlarda su sertlik tuzlarına ve asitlere ve alkalilere karşı dayanıklıdır. Genapol PF 80 FP Toz, düşük köpüklenme eğilimi ile birlikte iyi bir ıslatma ve dağıtma etkisine sahiptir.

 

Genapol PF 80 FP tozu, deterjan ve temizleme maddesi tozlarında çok iyi dispersiyon etkisine sahip düşük köpüklü bir yüzey aktif madde olarak kullanılır. Bunlar sadece toz bileşenlerin karıştırılmasıyla üretilebilir. Genapol PF 80 FP tozu, emülsiyon polimerizasyonunda düşük köpüren bir emülgatör olarak ve pigment pastaları ve preparatları için bir dağıtıcı ajan olarak da kullanılır.
Genapol PF 80 Powder, kimya endüstrisi için düşük köpüklü, iyonik olmayan bir yüzey aktif maddedir. Bu beyaz toz, diğer noniyonik, anyonik ve katyonik yüzey aktif cisimleri ile kombinasyon halinde kullanılabilir. Genapol PF 80 FP tozu, su sertlik tuzlarına ve normalde kullanılan konsantrasyonlarda asitlere ve alkalilere karşı dayanıklıdır. Genapol PF 80 FP Toz, düşük köpüklenme eğilimi ile birlikte iyi bir ıslatma ve dağıtma etkisine sahiptir.

 

Genapol PF 80 FP tozu, deterjan ve temizlik maddesi tozlarında çok iyi dispersiyon etkisi olan düşük köpüklü bir yüzey aktif madde olarak kullanılır. Bunlar sadece toz bileşenlerin karıştırılmasıyla üretilebilir. Genapol PF 80 FP tozu, emülsiyon polimerizasyonunda düşük köpüren bir emülgatör olarak ve pigment pastaları ve preparatları için bir dağıtıcı ajan olarak da kullanılır.

Genapol PF 80 FP yapı endüstrisinde dağılmış ve ıslatıcı ajan malzemesi ajan olarak kullanılmıştır. Propilen oksit ve etilen oksit polimerize edilmiş üründür.

 

Ataman Chemicals © 2015 All Rights Reserved.