Akrochem P-105 ( SP-154)
Akrochem P-105 ( SP-154)
PHENOLIC RESIN supplied by Akrochem Corporation in the past.
Reactive phenolic resin now produced by SCHENECTADY
The old name of SP-154 Resin is Akrochem P-105.
Product Type: Tackifiers > Alkylphenolics
Chemical Composition: Phenolic resin
CAS Number: 9003-35-4
SP-154 Resin (Old Name: Akrochem® P-105) by Akrochem is a heat reactive phenolic resin-based tackifier, that was developed for the formulation of solvent-borne polychloroprene cement.
Akrochem P-105 ( SP-154) is used in general purpose and heat-activating contact cement.
Akrochem P-105 ( SP-154) offers high heat resistance, cohesive strength, shorter time and light color.
Akrochem P-105 ( SP-154)Resin shows compatibility with nitrile- and chloroprene rubber.
Akrochem P-105 ( SP-154) is a heat reactive phenolic resin that was developed for the formulation of solvent-borne polychloroprene cements that do not phase.
Akrochem P-105 ( SP-154) provides high heat resistance, high cohesive strength, shorter open time, and light color.
Akrochem P-105 ( SP-154) reacts with an active magnesium oxide, such as ELASTOMAG 170, in solvent solution, forming a salt which greatly increases the heat resistance of the adhesive.
Akrochem P-105 ( SP-154) can also be used in formulating adhesives with NBR, SBR, natural and reclaimed rubbers.
Akrochem P-105 ( SP-154) is completely compatible with NBR and CR.
Overview
Akrochem P-105 is widely used in the preparation of general-purpose and heat-activating polychloroprene cement.
Akrochem P-105 is also used in rubber adhesives to increase heat resistance and cohesive strength while keeping a light color.
Specifications
Physical form: Solid flakes
Specific gravity: 1.10
Methylol content: 8.0-12.0%
Primary Chemistry: Phenolic Resin
Features & Benefits of Akrochem P-105:
Excellent heat resistance
High cohesive strength
Compatible with nitrile and polychloroprene rubbers
Compatibility limit of approximately 25 parts by weight to 100 parts of SBR, natural, and reclaimed rubbers
Applications of Akrochem P 105:
Solvent-borne polychloroprene contact cements
Adhesive formulations and heat-activating polychloroprenes
SP-154 RESIN
(fka: P-105)
-HEAT REACTIVE PHENOLIC RESINPRODUCT DESCRIPTION:
SP-154 is a heat reactive phenolic resin that was developed for the formulation of solvent-borne polychloroprene cements.
TYPICAL PROPERTIES:
Physical Form ................................................ Flake
Specific Gravity ............................................. 1.10
Color, Gardner, 60% Solution in Toluene ..... 1 – 7
Melting Point, Capillary (°F) ......................... 160 – 190
Methylol Content (%) .................................... 8 – 12
SOLUBILITY:
SP-154 is soluble in aromatic hydrocarbons and ketones. It is partially soluble in higher alcohols and aliphatic hydrocarbons.
GENERAL RECOMMENDATIONS:
SP-154 is used in general purpose and heat-activating contact cements.
It provides high heat resistance, high cohesive strength, shorter open time, and light color.
This product reacts with an active magnesium oxide, such as ELASTOMAG 170, in solvent solution, forming a salt which greatly increases the heat resistance of the adhesive.
It can also be used in formulating adhesives with NBR, SBR, natural and reclaimed rubbers.
SP-154 is completely compatible with NBR and CR.
It has a compatibility limit of approximately 25 parts by weight in combination with 100 parts by weight of SBR, NR and reclaimed rubbers.
Adhesives made using SP-154 have excellent heat resistance, high cohesive strength, and light color.
In polychloroprene adhesives, SP-154 increases heat resistance and cohesive strength of the adhesive film.
STORAGE:
For best results, SP-154 should be stored where temperatures do not exceed 86°F for extended periods of time.
As with all phenolic resins, SP-154 will become darker with age
SP-154 Resin
Technical Datasheet | Supplied by Akrochem
Oil soluble, heat reactive phenolic resin.
Used in neoprene solvent type contact cements. Provides high heat resistance, high cohesive strength, shorter open time, and light color.
Possesses superior phase resistance. Can react with an active magnesium oxide in solvent solution, forming a salt which greatly increases the heat resistance of the adhesive.
SP-154 is a modified heat-reactive alkylphenol resin and is supplied in flake form that was developed especially for formulating solvent-borne polychloroprene contact cements that do not phase.
Adhesives made using SP-154 have excellent heat resistance, high cohesive strength, and light color.
In polychloroprene adhesives, SP-154 increases heat resistance and cohesive strength of the adhesive film.
Features & Benefits
Excellent heat resistance
High cohesive strength
Light color
Increases heat resistance and cohesive strength of the adhesive film in polychloroprene adhesives
Applications
Adhesives
Furniture
Related Industries
Automotive
Building-&-Construction
Consumer-Goods
Furniture
SP-154 is a heat-reactive phenolic resin that was specifically developed to prevent phasing in solvent-borne polychloroprene contact cements
partner icon image
Fulfilled By ChemPoint
Manufacturer: SI Group
Product Line: SI Group Phenolic Resins
Product: Reactive Phenolic Resins
Industries: Adhesives
PRODUCT LINES OF ATAMAN CHEMICALS:
ANTIFOAMS
CARBON BLACKS
CHEMICAL DISPERSIONS
COLORS - POWDERS
COLORS - PASTE DISPERSIONS
COLORS - POLYMERIC DISPERSIONS (MASTERBATCH)
COLORS - THERMOPLASTIC COLOR CONCENTRATES
CURE BLENDS & CHEMICAL BLENDS
ELASTOMERS
EMULSIONS & FLUIDS
FIRE RETARDANTS
FLOCKS & WOOD FLOURS
MAGNESIA PRODUCTS
MINERAL FILLERS
PLASTICIZERS
PROCESSING AIDS
RELEASE AGENTS
RESINS & TACKIFIERS
RUBBER CHEMICALS
SILICONE PRODUCTS
STEARATES
SULFURS
VULCANIZED VEGETABLE OILS
WAXES
ZINC OXIDES
