ACEMATT OK 412
ACEMATT OK 412 sold by ATAMAN is a wax-treated, medium particle sized precipitated silica.
By offering very high compatibility, it can beused in a large variety of coatings
ACEMATT OK 412 is a fine-grained wax after-treated precipitated silica.
This effective matting agent is suitable for pigmented coatings and due to the remarkable suspension behaviour it is particularly suitable for clear coatings and other non-pigmented systems.
The physical properties of ACEMATT OK 412 make it an all-purpose matting agent for coatings and overprint varnishes.
ACEMATT OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings.
ACEMATT OK 412, effective matting agent, is suitable for pigmented coatings.
Due to the remarkable suspension behavior, ACEMATT OK 412 is particularly suitable for clear coatings and other non-pigmented systems.
The physical properties of ACEMATT OK 412 makes it an all-purpose matting agent which obtains films with excellent surface smoothness.
Identified uses: Matting agents
KEY BENEFITS of ACEMATT OK 412
very low viscosity impact
high surface smoothness
all purpose silica
TYPICAL APPLICATIONS
General industrial coatings
Wood coatings
Plastic coatings
Car OEM coatings
TECHNICAL DATA
carbon content: 5.5 %
DOA absorption: 240 ml/100g
Grindo meter value: 27 µm
particlesize, d50: 6.3 µm
pH-value: 6.3
specific surface area(N2): 130 m²/g
RECOMMENDED ADDITION LEVEL
As supplied calculated on total formulation: 1.5 - 7.0 %
PROCESSING INSTRUCTIONS
Addition to the coating as supplied or as a predilution is possible.
HANDLING &STORAGE
For details regarding our packaging options for thisproduct, please contact your local sales representative.
Our products are inert and extremely stable chemically.
However, due totheir high specific surface area, they can absorb moisture and volatile organic compounds from the surrounding atmosphere.
Therefore, we recommend storing the products in sealed containers in a dry, coolplace, and removed from volatile organic substances.
Even if a product is stored under these conditions, after a longer period it can still pickup ambient moisture over time, which could lead toits exceeding thespecified moisture content.
For this reason, our recommended use-bydate is 24 months after date of manufacture.
Products more than 24 months old should be tested for moisture content before use in order to make certain that it is still suitable for the intended application.
OTHER PRODUCTS OF ATAMAN KIMYA THAT MIGHT BE OF INTEREST:
ACEMATT 82
Economical, special purpose, untreated matting agent with a heterogeneous particle size distribution.
Average agglomerate particle size: 7.0 µm d50 (laser diffraction)
ACEMATT 82 is an untreated precipitated silica.
This highly efficient matting agent is especially suitable for pigmented systems with low sheen (85°-reflectometer value- 60°-reflectometer value).
It is often used in decorative and industrial coatings.
ACEMATT HK 125
Economical, special purpose, untreated matting agent with a heterogeneous particle size distribution.
Average agglomerate particle size: 11.0 µm d50 (laser diffraction)
ACEMATT HK 125 is an untreated coarse-grained precipitated silica with heterogeneous particle size distribution.
This efficient matting agent is particularly suitable for pigmented systems with low sheen (85°-reflectometer value - 60°-reflectometer value).
It is often used in wood and decorative coatings.
ACEMATT HK 400
All-purpose untreated matting agent.
Average agglomerate particle size: 6.3 µm d50 (laser diffraction)
ACEMATT HK 400 is an untreated fine-grained precipitated silica.
This efficient matting agent is especially suitable for pigmented systems.
It is often used in can and coil coatings, decorative coatings, wood coatings and industrial coatings.
ACEMATT HK 440
Untreated matting agent manufactured using a newly developed process.
Average agglomerate particle size: 14.5 µm d50 (laser diffraction)
ACEMATT HK 440 is an untreated, extremely coarse-grained precipitated silica.
This highly efficient matting agent is especially suitable for pigmented systems with extremely
low sheen (85°-reflectometer value - 60°-reflectometer value).
It is often used in decorative coatings, thick film coatings, base coats and industrial coatings.
ACEMATT HK 450
Untreated matting agent manufactured using a newly developed process.
Average agglomerate particle size: 10.5 µm d50 (laser diffraction)
ACEMATT HK 450 is an untreated coarse-grained precipitated silica.
This highly efficient matting agent is especially suitable for pigmented systems with low sheen (85°-reflectometer value - 60°-reflectometer value).
It is often used in can and coil coatings, decorative and industrial coatings.
ACEMATT 790
Untreated matting agent manufactured using a newly developed process
Average agglomerate particle size: 7.0 µm d50 (laser diffraction)
ACEMATT 790 is an untreated precipitated silica of medium particle size.
This highly efficient matting agent is especially suitable for pigmented systems with low sheen (85°-reflectometer value - 60°-reflectometer value).
It is often used in can and coil coatings, decorative and industrial coatings.
ACEMATT 810
Untreated matting agent manufactured using a newly developed process
Average agglomerate particle size: 10.5 µm d50 (laser diffraction)
ACEMATT 810 is an untreated coarse-grained precipitated silica.
This highly efficient matting agent is especially suitable for pigmented systems with low sheen (85°-reflectometer value - 60°-reflectometer value).
It is often used in can and coil coatings, decorative and industrial coatings.
ACEMATT 3600
Fine-grained, treated matting agent designed for low gloss radiation curable coatings.
Average agglomerate particle size: 5.0 µm d50 (laser diffraction)
ACEMATT 3600 is an extremely fine-grained precipitated silica, after-treated with a special polymer.
This matting agent has been specially developed for 100% radically curing UV coatings.
The coating films obtained have the highest surface smoothness.
ACEMATT 3600 is particularly distinguished by its very low thickening effect and very good chemical resistance.
It is excellently suited for use in very thin film and very thick film UV-coatings.
ACEMATT OK 412 and ACEMATT OK 500
All-purpose matting agent with organic surface-treatment.
Average agglomerate particle size: 6.3 µm d50 (laser diffraction)
ACEMATT OK 412 and ACEMATT OK 500 are fine-grained precipitated silica, after-treated with wax.
These efficient matting agents are suitable for unpigmented and pigmented systems.
Due to the excellent suspension behavior they are especially suitable for clear coatings.
The coating films obtained have excellent surface smoothness.
Thanks to their property profile, ACEMATT OK 412 and ACEMATT OK 500 are highly versatile.
In case ACEMATT OK 412 gives rise to drying delays, we recommend the use of ACEMATT OK 500.
ACEMATT OK 520
All-purpose matting agent with organic surface-treatment.
Average agglomerate particle size: 6.5 µm d50 (laser diffraction)
ACEMATT OK 520 is a fine-grained precipitated silica, after-treated with wax.
This highly efficient matting agent is suitable for unpigmented and pigmented systems.
Due to its excellent suspension behavior it is especially suitable for clear coatings.
The coating films obtained have high surface smoothness.
ACEMATT OK 520 is particularly distinguished by its good suitability for use also in water-based coatings and impresses by its high transparency and very good chemical resistance.
ACEMATT OK 607
Very fine-grained matting agent with organic surface-treatment.
Average agglomerate particle size: 4.4 µm d50 (laser diffraction)
ACEMATT OK 607 is a very fine-grained precipitated silica, after-treated with wax.
This efficient matting agent is suitable for unpigmented and pigmented systems.
Due to its excellent suspension behavior, it is especially suitable for clear coatings.
The coating films obtained have the highest surface smoothness.
ACEMATT OK 607 is particularly distinguished by its high sheen (85°-reflectometer value- 60°-reflectometer value).
It is excellently suited for use in thin film coatings.
ACEMATT OK 900
Special purpose matting agent with organic surface treatment.
Average agglomerate particle size: 7.5 µm d50 (laser diffraction)
ACEMATT OK 900 is a medium-grained precipitated silica, after-treated with wax.
This very efficient matting agent is particularly suitable for pigmented coatings systems with low sheen (85°-reflectometer value - 60°-reflectometer value).
It is often used in can and coil coatings as well as in industrial coatings.
ACEMATT TS 100
Thermal, untreated silica
Average agglomerate particle size: 9.5 µm d50 (laser diffraction)
ACEMATT TS 100 is a fumed silica that is not surface treated.
This matting agent is distinguished by excellent matting efficiency combined with the highest transparency.
Thanks to its unique property profile, it is particularly suitable for coatings that are not easily matted.
Particularly noteworthy is its use in water-based coatings, waterborne UV-coatings, clear coatings, and coatings for leather, artificial leather, and foils, as well as top coats of all types.
ACEMATT TS 100 allows formulation of coatings with outstanding resistance to household chemicals.
Due to its high purity and extremely low electrical conductivity, ACEMATT TS 100 is excellently suited for use in correspondingly sensitive coating systems such as solder resist.
ACEMATT TS 100 improves flow behavior and increases storage stability in powder coatings.
ACEMATT 3300
Thermal, treated silica
Average agglomerate particle size: 10.0 µm d50 (laser diffraction)
ACEMATT 3300 is a fumed silica, after-treated with a special polymer.
This matting agent is distinguished by the highest matting efficiency combined with high transparency.
It has been developed specifically for use in soft-feel coatings with the most sophisticated haptics.
Particularly noteworthy is its use in water-based coatings, waterborne UV-coatings, clear coatings, and coatings for leather, artificial leather, and foils, as well as top coats of all types.
ACEMATT 3300 allows formulation of coatings with outstanding resistance to household chemicals.
When used in waterborne formulations, adsorption of associative thickeners is minimal so that excellent rheological stability is achieved.
ACEMATT - silica-based matting agents
ACEMATT 3300
ACEMATT 3300 is an advanced polymer-treated thermal silica, characterised by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements.
ACEMATT 3600
ACEMATT 3600 is a very fine-grained polymer-treated precipitated silica, specially developed for 100% radically curing UV-coatings.
ACEMATT 790
ACEMATT 790 as untreated, fine particle sized precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems.
ACEMATT 810
ACEMATT 810 as untreated coarse-grained precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems.
ACEMATT 82
ACEMATT 82 is an untreated precipitated silica with a very high matting efficiency.
ACEMATT HK 125
ACEMATT HK 125 is an untreated coarse-grained precipitated silica with heterogeneous particle size distribution.
ACEMATT HK 400
ACEMATT HK 400 is an untreated fine-grained precipitated silica primarily used in pigmented coatings systems.
ACEMATT HK 440
ACEMATT HK 440 is an untreated extremely coarse-grained precipitated silica, particularly suitable for pigmented coatings systems with very low sheen (85° reflectometer value).
ACEMATT HK 450
ACEMATT HK 450 is an untreated coarse-grained precipitated silica, particularly suitable for pigmented coatings systems.
ACEMATT OK 412
ACEMATT OK 412 is a fine-grained wax after-treated precipitated silica.
This effective matting agent is suitable for pigmented coatings and due to the remarkable suspension behaviour it is particularly suitable for clear coatings and other non-pigmented systems.
ACEMATT OK 412 LC
ACEMATT OK 412 LC is a fine-grained wax after-treated precipitated silica.
ACEMATT OK 500
ACEMATT OK 500 is a fine-grained wax after-treated precipitated silica, which is suitable for pigmented as well as non-pigmented systems and due to the excellent suspension behaviour particularly applicable in clear coatings.
ACEMATT OK 520
ACEMATT OK 520 is a fine-grained wax after-treated precipitated silica.
This matting agent is suitable for pigmented, as well as non-pigmented systems and due to the suspension behaviour particularly applicable in clear coatings.
ACEMATT OK 607
ACEMATT OK 607 is a very fine-grained wax after-treated precipitated silica.
This matting agent is suitable for pigmented, as well as non-pigmented systems and due to the suspension behaviour particularly applicable in clear coatings.
ACEMATT OK 607 LC
ACEMATT OK 607 LC is a very fine-grained wax after-treated precipitated silica.
ACEMATT OK 900
ACEMATT OK 900 is a treated precipitated silica with a medium particle size.
ACEMATT TS 100
ACEMATT TS 100 is an untreated thermal silica characterised by very high matting efficiency combined with very high transparency.
Thanks to the unique properties ACEMATT TS 100 is particularly suitable for coating systems that are difficult to matte.
ACEMATT TS 100/20
ACEMATT TS 100/20 is an untreated thermal silica characterised by very high matting efficiency combined with high transparency.
The particle size distribution in ACEMATT TS 100/20 is slightly broader than in ACEMATT TS 100.
Thanks to the unique properties ACEMATT TS 100/20 is particularly suitable for coating systems that are difficult to matt.
