1-9 A-D E-G H-M N-P Q-S T-Z

HOSTAPHAT 1306

HOSTAPHAT 1306

CAS No. : -
EC No. : -

Synonyms:
1-(2,3,4,6-tetramethylphenyl)vinyl dihydrogen phosphate; Phosphoric acid, monoester with 2,3,4,5-tetramethyl-alpha-methylenebenzyl alcohol; VINYL ACETATE; Ethenyl acetate; 108-05-4; Acetic acid ethenyl ester; Acetic acid vinyl ester; Ethenyl ethanoate; 1-Acetoxyethylene; Vinylacetate; Vinyl ethanoate; Vinyl acetate monomer; Acetoxyethene; Vinylacetat; Vinyl A monomer; Zeset T; Acetoxyethylene; Vinylacetaat; Octan winylu; Acetic acid, ethenyl ester; Acetate de vinyle; Vinyl acetate H.Q.; styrene-acrylic acid; cinnamylidene acetic acid; Spectrum_001920; Cinnamalacetic acid; AK142005; ACMC-20am1h; Spectrum2_000817; Spectrum3_000712; Spectrum4_001641; NCIOpen2_000137; HOSTAPHAT 1306

FR

Agent mouillant anionique et émulsifiant
COMPOSITION DE L'HOSTAPHAT 1306
Alkyl polyéthylène glycol éther acide phosphorique mono / diester (50/50), forme acide
PROPRIÉTÉS DU PRODUIT HOSTAPHAT 1306 *)
HOSTAPHAT 1306 Teneur en substance active Environ 100%
HOSTAPHAT 1306 Aspect à 20 ° C Liquide clair, jaunâtre
HOSTAPHAT 1306 Densité à 20 ° C (DIN 51757) Environ 1,04 g / cm³
HOSTAPHAT 1306 Viscosité à 20 ° C (DIN 51550) Environ 700 mPa * s
HOSTAPHAT 1306 Température de cristallisation inférieure à - 10 ° C
HOSTAPHAT 1306 pH d'une solution à 1% dans l'eau / IPA 1/3 à 20 ° C Environ 2 - 3
HOSTAPHAT 1306 Point d'éclair (DIN51758)> 100 ° C
HOSTAPHAT 1306 Solubilité dans l'eau Soluble en formant une émulsion trouble
HOSTAPHAT 1306 Liste FDA FDA 21CFR178.3400
*) Ces caractéristiques sont fournies à titre indicatif uniquement et ne doivent pas être considérées comme des spécifications du produit. Les tolérances sont données dans la fiche technique du produit. Pour plus d'informations sur les propriétés du produit, les données toxicologiques, écologiques et de sécurité, veuillez vous référer à la fiche de données de sécurité.
UTILISATION DE L'HOSTAPHAT 1306
Hostaphat 1306 est utilisé dans les applications suivantes:
- comme émulsifiant dans la polymérisation en émulsion, 0,5 - 1,5% sur les monomères
- comme agent dispersant pour pigments en dispersions aqueuses, 10 à 30% sur les pigments
- comme agent mouillant et détergent dans le nettoyage des véhicules et des métaux et la finition des textiles
procédés, recommandation générale: 1 - 3 g / l.

EN

Anionic wetting agent and emulsifier
HOSTAPHAT 1306 COMPOSITION
Alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form
HOSTAPHAT 1306 PRODUCT PROPERTIES*)
HOSTAPHAT 1306 Active substance content About 100%
HOSTAPHAT 1306 Appearance at 20°C Clear, yellowish liquid
HOSTAPHAT 1306 Density at 20°C (DIN 51757) About 1.04 g/cm³
HOSTAPHAT 1306 Viscosity at 20°C (DIN 51550) About 700 mPa*s
HOSTAPHAT 1306 Crystallization temperature Below - 10°C
HOSTAPHAT 1306 pH of a 1% solution in water/IPA 1/3 at 20°C About 2 – 3
HOSTAPHAT 1306 Flash point (DIN51758) > 100°C
HOSTAPHAT 1306 Solubility in water Soluble by forming a cloudy emulsion
HOSTAPHAT 1306 FDA Listing FDA 21CFR178.3400
*) These characteristics are for guidance only and are not to be taken as product specifications. The tolerances are given in the product specification sheet. For further information on product properties, toxicological, ecological and safety data, please refer to the safety data sheet.

HOSTAPHAT 1306 USE
Hostaphat 1306 is used in the following applications:
— as emulsifier in emulsion polymerization, 0,5 – 1,5 % on monomers
— as dispersing agent for pigments in aqueous dispersions, 10 – 30 % on pigments
— as wetting agent and detergent in vehicle and metal cleaning and textile finishing
processes, general recommendation: 1 – 3 g/l.

Ataman Chemicals © 2015 All Rights Reserved.