LOCRON S Flakes

LOCRON S flakes

though being well tolerated, dermatological trials should be carried out with the final antiperspirant/ deodorant formulation to establish beyond doubt that no skin irritation is caused by the combination of products, each of which is in itself non-irritant. Widely used in perspiration-reducing preparations.

All Locron grades can also be incorporated in skin lotions, skin creams and shaving lotions to achieve a slight adstringent effect.

Locron S is a mild astringent that reduces perspiration and has a slight deodorising effect. Locron S is therefore used in a wide range of antiperspirant and deodorant formulations.

Locron S has been used on a growing scale for many years throughout the world as an active ingredient in antiperspirant products. It is generally well tolerated also on long-term use. Although Locron S is being well tolerated, dermatological trials should be carried with the final antiperspirant/deodorant formulation to establish beyond doubt that no skin irritation is caused by the combination of products, each of which is in itself nonirritant

For aqueous formulations like pump sprays or roll-ons a 24 h effect is generally seen at about 10% active concentration (i.e. 20% Locron® L, L.ZA or LIC).

Locron S should be used rather than Locron® P for preparing aqueous solutions because the former dissolves more rapidly in water. Moreover solutions of Locron S have greater clarity, although optimum clarity is obtained only after the solution has been left to stand for about 24 h.

Locron S is a group of specific aluminum salts having the general formula AlnCl(3n-m)(OH)m. It is used in cosmetics as an antiperspirant and as a coagulant in water purification.

In water purification, this compound is preferred in some cases because of its high charge, which makes it more effective at destabilizing and removing suspended materials than other aluminum salts such as aluminum sulfate, aluminum chloride and various forms of polyaluminum chloride (PAC) and polyaluminum chlorisulfate, in which the aluminum structure results in a lower net charge thanLocron S. Further, the high degree of neutralization of the HCl results in minimal impact on treated water pH when compared to other aluminum and iron salts.

Locron S is also used as a coagulant in water and wastewater treatment processes to remove dissolved organic matter and colloidal particles present in suspension.

Because of the explosion hazard related to hydrogen produced by the reaction of aluminum metal with hydrochloric acid, the most common industrial practice is to prepare a solution of Locron S (ACH) by reacting aluminum hydroxide with hydrochloric acid. The ACH product is reacted with aluminum ingots at 100 °C using steam in an open mixing tank. The Al to ACH ratio and the time of reaction allowed determines the polymer form of the PAC n to m ratio.

ALUMINUM CHLOROHYDRATE

Aluminium chlorohydrate is a group of specific aluminium salts having the general formula AlnCl(3n-m)(OH)m. It is used in deodorants and antiperspirants and as a coagulant in water purification.

In water purification, this compound is preferred in some cases because of its high charge, which makes it more effective at destabilizing and removing suspended materials than other aluminium salts such as aluminium sulfate,aluminium chloride and various forms of polyaluminium chloride and polyaluminium chlorisulfate, in which the aluminium structure results in a lower net charge than aluminium chlorohydrate. Further, the high degree of neutralization of the HCl results in minimal impact on treated water pH when compared to other aluminium and iron salts.

Water treatment chemicalLocron S, Inorganic macromolecular compound; colorless or light yellow solid powder, compeletely dissolved in water with corrosion .

CHEMICAL and PHYSICAL PROPERTIES

STORAGE of Locron S

 Store in a cool, dry, well ventilated place and out of direct sunlight. Keep containers closed when not in use - check

 ALUMINUM CHLOROHYDRATE; Aluminium hydroxychloride; EC/List no.: 234-933-1; CAS no.: 12042-91-0; Mol. formula: Al2ClH5O5

Composition: Aluminium hydroxychloride

INCI name: Aluminum Chlorohydrate

Aluminium chlorohydrate is a mild astringent that reduces perspiration and has a slight deodorising effect. It is therefore used in a wide range of antiperspirant and deodorant formula-tions.

Aluminum hydroxychloride has been used on a growing scale for many years throughout the world as an active ingredient in antiperspirant products. It is generally well tolerated also on long-term use.

Although Locron is beeing well tolerated, dermatologi-cal trials should be carried with the final antiperspirant/deodorant formulation to establish beyond doubt that no skin irritation is caused by the combination of products, each of which is in itself non-irritant.

Aluminium chlorohydrate is a group of specific aluminum salts having the general formula AlnCl(3n-m)(OH)m. It is used in cosmetics as an antiperspirant and as a coagulant in water purification.

In water purification, this compound is preferred in some cases because of its high charge, which makes it more effective at destabilizing and removing suspended materials than other aluminum salts such as aluminium sulfate, aluminium chloride and various forms of polyaluminium chloride (PAC) and polyaluminium chlorisulfate, in which the aluminum structure results in a lower net charge than aluminium chlorohydrate. Further, the high degree of neutralization of the HCl results in minimal impact on treated water pH when compared to other aluminium and iron salts.

Aluminium chlorohydrate is a group of specific aluminium salts having the general formula AlnCl(3n-m)(OH)m. It is used in deodorants and antiperspirants and as a coagulant in water purification.

In water purification, this compound is preferred in some cases because of its high charge, which makes it more effective at destabilizing and removing suspended materials than other aluminium salts such as aluminium sulfate,aluminium chloride and various forms of polyaluminium chloride and polyaluminium chlorisulfate, in which the aluminium structure results in a lower net charge than aluminium chlorohydrate. Further, the high degree of neutralization of the HCl results in minimal impact on treated water pH when compared to other aluminium and iron salts.

The Locron grades are aluminum hydroxychlorides in solid form (Locron S, Locron P) or as a 50 % aqueous solutions (Locron L, LIC, LIF).

Locron is a mild astringent that reduces perspiration and has a slight deodorising effect. It is therefore used in a wide range of antiperspirant and deodorant formulations.Aluminum hydroxychloride has been used on a growing scale for many years throughout the world as an active ingredient in antiperspirant products. It is generally well tolerated also on long-term use.Although Locron is beeing well tolerated, dermatological trials should be carried with the final antiperspirant/deodorant formulation to establish beyond doubt that no skin irritation is caused by the combination of products, each of which is in itself non-irritant.

Water treatment chemical Aluminum Chlorohydrate, Inorganic macromolecular compound; colorless or light yellow solid powder, compeletely dissolved in water with corrosion .

Aluminum chlorohydrate is a group of water-soluble aluminum complexes with the general formula AlnCl(3n-m)(OH)m. It is included up to 25% in over-the-counter hygiene products as an active antiperspirant agent. The primary site of action of aluminum chlorohydrate is at the level of the stratum corneum layer, which is relatively near the skin surface. It is also used as a coagulant in the water purification process.

Uses

Aluminum chlorohydrate is one of the most common active ingredients in commercial antiperspirants. The variation most commonly used in deodorants and antiperspirants is Al2Cl(OH)5.

Aluminum chlorohydrate is also used as a coagulant in water and wastewater treatment processes to remove dissolved organic matter and colloidal particles present in suspension.

Synthesis

Aluminum chlorohydrate can be commercially manufactured by reacting aluminum with hydrochloric acid. A number of aluminum-containing raw materials can be used, including aluminum metal, alumina trihydrate, aluminum chloride, aluminum sulfate and combinations of these. The products can contain by-product salts, such as sodium/calcium/magnesium chloride or sulfate.

Because of the explosion hazard related to hydrogen produced by the reaction of aluminum metal with hydrochloric acid, the most common industrial practice is to prepare a solution of aluminum chlorohydrate (ACH) by reacting aluminum hydroxide with hydrochloric acid. The ACH product is reacted with aluminum ingots at 100 °C using steam in an open mixing tank. The Al to ACH ratio and the time of reaction allowed determines the polymer form of the PAC n to m ratio.

CHEMICAL and PHYSICAL PROPERTIES

Molecular Weight:179.49077720

Formula:Al2 Cl H10 O5

Physical state and appearance: Solid. (Powdered solid.)

Apperance: Colorless to slightly yellow color; clear to slightly hazy appearance.

Odor: Odorless.

Taste: Not available.

Molecular Weight: 210.48 g/mole

Color: Colorless to light yellow.

pH (1% soln/water): Not available.

Boiling Point: Not available.

Melting Point: Decomposes.

Flash Point: 32.00 °F. TCC ( 0.00 °C. )

Critical Temperature: Not available.

Specific Gravity: 1.7 (Water = 1)

Dispersion Properties: See solubility in water.

Solubility: Soluble in cold water

APPLICATION

1. LOCRON S as a important flocculant coagulant ,widely used for waste water treatment.

2. LOCRON P specialized for color removal.

3.cosmetic in diary chemical industry field.

LOCRON P Antiperspirant and deodorant.

LOCRON P Cream, lotion.

Aluminium chlorohydrate is one of the most common active ingredients in commercial antiperspirants. The variation most commonly used in deodorants and antiperspirants is Al2Cl(OH)5.

Aluminium chlorohydrate is also used as a flocculant in water and waste water treatment processes to removedissolved organic matter and colloidal particles present in suspension.

The Locron grades are aluminum hydroxychlorides in solid form (Locron S, Locron P) or as a 50 % aqueous solutions (Locron L, LIC, LIF).

Locron is a mild astringent that reduces perspiration and has a slight deodorising effect. It is therefore used in a wide range of antiperspirant and deodorant formulations. Aluminum hydroxychloride has been used on a growing scale for many years throughout the world as an active ingredient in antiperspirant products. It is generally well tolerated also on long-term use.

Although Locron is beeing well tolerated, dermatological trials should be carried with the final antiperspirant/deodorant formulation to establish beyond doubt that no skin irritation is caused by the combination of products, each of which is in itself non-irritant.

The Locron grades are widely used in perspiration-reducing preparations. Locron P is most suitable for anhydrous products like powder-sprays, suspension-sprays or sticks. Locron S may be used to generate aqueous solutions of aluminum chlorohydrate. Locron L, Locron LIC and Locron LIF are used for roll-ons, pump-sprays, emulsions and aqueous gels. All Locron grades can also be incorporated in skin lotions, skin creams and shaving lotions to achieve a slight adstringent effect.

LOCRON P 48h anti-transpirant protection.

LOCRON P Low iron qualities available for reduced yellowing.

LOCRON S High performance anti-transpirant actives.

LOCRON S Adstringent effect also in creams, lotions and afertshave formulations.

Applications

Locron P is an antiperspirant active for aerosol spray or stick application.

STORAGE of ALUMINUM CHLOROHYDRATE

Store in a cool, dry, well ventilated place and out of direct sunlight. Keep containers closed when not in use - check Regularly for leaks.

Dialuminium chloride pentahydroxide

CAS names

Aluminum chloride hydroxide (Al2Cl(OH)5)

IUPAC names

ACH

Aluminium Chloride Hydroxide

Aluminium Chlorohydrate

Aluminum chloride hydroxide

aluminum; chloroaluminum; pentahydrate

dialuminium (3+) chloride pentahydroxide

Dialuminium chloride pentahydroxide, polyaluminium chloride

dialuminium chloride pentahydroxoide

dialuminium(3+) chloride pentahydroxide

dialuminium(3+) ion chloride pentahydroxide

MO-PAC "product number index" "UHB" M, F, D eg. MO-PAC 24 UHB D, MO-PAC UHB - P 50 (powder)

METATAGS;ALUMINUM CHLOROHYDROXIDE;ALUMINUM CHLOROHYDROXIDE,DIHYDRATE;ALUMINUM HYDROXYCHLORIDE,DIHYDRATE;MACROSPHERICAL(R) 95;BASIC ALUMINUM CHLORIDE;CHLORHYDROL(R);POLYALUMINUM CHLORIDE;POLYALUMINUM CHLORIDE, DIHYDRATE;Aluminium chloride; POLYALUMINUM CHLORIDE; POLYALUMINUM CHLORIDE; HYDROXIDE SULFATE,Polyaluminum chloride; hysroxisesulfate;ALUMINUMHYDROXIDEHYDRATE;ALUMINUMCHLOROHYDRATE;Aluminumhydroxide;Aluminumchlorohydrate;D02852;microdry;astringen;aloxicoll;chlorhydrol;dialuminium;locronextra;wickenol303;wickenol321;wickenol323;Aluminium chloride; POLYALUMINUM CHLORIDE; POLYALUMINUM CHLORIDE HYDROXIDE SULFATE,Polyaluminum chloride; hysroxise sulfate; ALUMINUM HYDROXIDE HYDRATE; ALUMINUM CHLOROHYDRATE; Aluminum hydroxide; Aluminum chlorohydrate;ALUMINUM CHLOROHYDROXIDE; ALUMINUM CHLOROHYDROXIDE, DIHYDRATE ALUMINUM HYDROXYCHLORIDE, DIHYDRATE 12042-91-0 MACROSPHERICAL(R) 95 BASIC ALUMINUM CHLORIDE CHLORHYDROL(R) POLYALUMINUM CHLORIDE POLYALUMINUM CHLORIDE, DIHYDRATE MICRO-DRY(R) MICRO-DRY(R) SUPERULTRAFINE MICRO-DRY(R); ULTRAFINE REACH(R) 101; 103 REACH(R); 301 REACH(R); 501 aluminumchlorhydrate; aluminumchlorhydrol;Water and wastewater treatment Aluminumchloridehydroxide;aluminumchloridehydroxide(al2cl(oh)5); aluminumhydroxidechloride; astringen basicaluminumchlorate chlorhydrol; chlorhydrol,granular chlorhydrol,impalpable chlorohydrol; chloropentahydroxydialuminum; dialuminium; dialuminiumchloridepentahydroxide ;locronextra; locronflakes; locronpowder; locronsolution; macrospherical95; microdry ;wickenol303; wickenol321; wickenol323; wickenol324; POLY ALUMINUM CHLORIDE (PAC); Dialuminiumchloridpentahydroxid; ALUMINUM POLYCHLORIDE; Aluminium chloride hydroxide (Al2Cl(OH)5); alumium chlorohydrate solution; ALUMINIUMHYDROXYCHLORIDE; ALUMINIUMCHLORHYDROXIDE; INORGANIC & ORGANIC CHEMICALS; aloxicoll aluminum chlorhydroxide; aluminum chloride oxide; ALUMINUM CHLOROHYDRATE MODIFIED SOLUTION; (S5) Inorganics Al2ClH9O7 D02852 Aluminum chlorohydroxide 1g [12042-91-0] AluMinuM chlorohydroxide coMplex (Chlorhydrol) AluMinuM(III) chloride pentahydroxide; ALUMINUM CHLOROHYDRATE(ACH);Aluminium chloride hexahydrate;ALUMINUM CHLOROHYDRATE Suppliers;ALUMINUM CHLOROHYDRATE Preparation Products And Raw materials;Al2ClH9O7;Aluminum chlorhydrate (Al2(OH)5Cl);Aluminum chlorhydrol;Aluminum chlorohydrate;Aluminum hydroxide chloride;Aluminum hydroxychloride;Aluminum hydroxychloride, dihydrate;Aluminum monochloride pentahydroxide;Basic aluminum chlorate (Al2(OH)5Cl);Chloropentahydroxydialuminum;EC 234-933-1;EINECS 234-933-1;Locron Extra;Locron flakes;Locron L;Locron powder;Inorganic Chemicals: Nitrates, Phosphates, Oxides & more , SRL Pharma GmbH Product List,Locron solution;Macrospherical 95;UNII-407PSC3OC7;Wickenol 303;Wickenol 321;Wickenol 323;Wickenol 324;Aluminum chloride hydroxide (Al2Cl(OH)5);Aluminum chlorohydroxide, dihydrate;Dialuminium chloride pentahydroxide;Aluminum chlorhydrate;Aluminum chlorhydrate 50% solution;Aluminum chlorhydroxide;Aluminum chlorohydrate;Aluminum chlorohydrate [USAN];Aluminum hydroxychloride;locron S; Aluminum Chlorohydrate for Industrial Water Treatment;(Al2(OH)5Cl);aluminium chlorhydroxide pentahydrate;Antiperspirant,locron S price; locron S suppliers;(A(OH5);;chloropentahydroxydialuminium;chloropentahydroxydialuminum;macrospherical 95;sAACH-7171, ACH 325, ACH 331, ACH 7-321, Al2-Cl-H5-O5, Aloxicoll, Aquarhone 18, Astringen, Astringen 10, BanoltanWhite, Berukotan AC-P, Cartafix LA, Cawood 5025, E 200, E 200 (coagulant), Gelsica, HPB 5025, Hessidrex WT, Hydral,Hydrofugal, Kempac 10, Kempac 20, Kemwater PAX 14, Locron, Locron P, Locron S, Nalco 8676, OCAL, Oulupac 180, PAC,PAC (salt), PAC 250A, PAC 250AD, PACK 300M, PALC, Paho 2S, Sansudor;UNII-HPN8MZW13M, Wickenol cps 325,[Al2(OH)nCL6-n]m, aluminium chlorhydrate, aluminium chloride basic, aluminium chlorohydroxide, aluminol ACH, aluminumchloride hydroxide, aluminum chloride hydroxide oxide, basic, aluminum chloride oxide, aluminum chloride, basic, aluminum chlorohydrate (anhydrous), aluminum chlorohydrol, aluminum hydroxide chloride;dialuminium chloride pentahydroxide;pentahydroxychlorure de dialuminium;pentahidroxicloruro de dialuminio;Dialuminiumchloridpentahydroxid;ALUMINUM(III) CHLORIDE PENTAHYDROXIDE;poly aluminium chloride;Crystalline aluminium chloride;aluminum trichloride crystal;aluminum chloride hexahydrate;Dihydrate; Aluminum Hydroxychloride,Dihydrate; Aluminum chlorhydrol, dihydrate; Dialuminium chloride pentahydroxide;Aluminum Chloride Hydroxide, dihydrate; Polyaluminum Chloride,Metal Salts;Sumalchlor 50;Takibine 1500;Water and wastewater Treatment Coagulant;Flocculant;183257-07-0,53026-85-0,Al2ClH10O5,locronS;LOCRON S; Nalco 8676, OCAL, Oulupac 180, PAC, PAC 250A, PAC 250AD, PACK 300M, PAC (salt), Paho 2S, PALC, Sansudor; Aluminium chloride; Molecular FormulaAlCl3; Average mass133.340 Da; Monoisotopic mass131.888092 Da; 215-477-2 [EINECS]; 7446-70-0 [RN]; AlCl3 [Formula]; Aluminium chloride [Wiki]; Aluminium trichloride [ACD/IUPAC Name]; aluminium(III) chloride; Aluminiumchlorid [German]; Aluminiumtrichlorid [German] [ACD/IUPAC Name]; Aluminum chloride (8CI 9CI); Aluminum monochloride; Aluminum trichloride; Aluminum(III) Chloride; Trichlorure d'aluminium [French] [ACD/IUPAC Name]; [AlCl3]; 3495-54-3 [RN]; AlCl3, face centered cubic

Alluminio(cloruro di) [Italian]; Alluminio(cloruro di); Alluminio(cloruro di) [Italian]; Aloxicoll; Aluminium chloride, Anhydrous; aluminium(3+) chloride; ALUMINIUM(3+) ION TRICHLORIDE; Aluminium(II)chloride; aluminium(iii) trichloride; Aluminium(III)chloride; Aluminium, (chlorure d'); Aluminium, (chlorure d') [French]; Aluminiumchlorid; Aluminiumchlorid [German]; Aluminiumchloride; aluminiumtrichloride; Aluminol ACH; Aluminum atomic spectroscopy standard concentrate 1.00- g Al; ALUMINUM CHLORIDE [USP]; ALUMINUM CHLORIDE (1:3); Aluminum chloride- ethanol solution; aluminum chloride hydrate; Aluminum chloride hydroxide oxide, basic; Aluminum chlorohydrate; Aluminum chlorohydrate (anhydrous); Aluminum Choride, anhydrous; Aluminum Sesquichlorohydrate - ALOXICOLL 31L; Aluminum standard concentrate 10.00 g Alluminum, (chlorure d') [French]; Aluminum, (chlorure d') [French]; Anhydrol forte; Aquarhone 18; Astringen; Astringen 10; Banoltan White; Basic aluminum chloride; Basic aluminum chloride, hydrate; Berukotan AC-P; Cartafix LA; Cawood 5025; Chlorhydrol; Chlorure d'aluminium [French]; Drysol [Trade name]; E 200 (coagulant); EINECS 215-477-2; EINECS 231-208-1; Gelsica; Hessidrex WT; Hydral; Hydrofugal; Kempac 10; Kempac 20; Kemwater PAX 14; Locron; Locron P; Locron S; MFCD00003422 [MDL number]CAL; Oulupac 180; PAC (salt); PAC 250A; PAC 250AD; PACK 300M; Paho 2S; PALC; Sansudor; TK Flock; trichloridoaluminium; trichloroalumane; trichloroaluminium; TRICHLOROALUMINUM; UNII:LIF1N9568Y; UNII-LIF1N9568Y; Wickenol cps 325; WLN: AL G3; ??? [Chinese]; aluminum;chloroaluminum;pentahydrate; CAS Number:12042-91-0; Other: 183257-07-0; ECHA EINECS - REACH Pre-Reg:234-933-1; FDA UNII:407PSC3OC7; Molecular Weight:179.49077720; Formula:Al2 Cl H10 O5; aluminium chlorhydrate (Al2(OH)5Cl); aluminium chlorhydrol; aluminium chlorhydroxide pentahydrate; aluminium chloride hydroxide (Al2Cl(OH)5); aluminium chlorohydrate; aluminium; Chloroaluminum;pentahydrate; aluminum chlorhydrate (Al2(OH)5Cl); aluminum chlorhydrol; aluminum chlorhydroxide pentahydrate; aluminum chloride hydroxide (Al2Cl(OH)5)aluminum;chloroaluminum;pentahydrate; chloropentahydroxydialuminium; chloropentahydroxydialuminum; locron extra; locron L; macrospherical 95; wickenol 303; Aluminiumhydroxichlorid Schuppen (LOCRON S); CAS number:12042-91-0INCI:Aluminum ChlorohydrateEINECS number:234-933-1; Functionality Anti persperant; Aluminum Chlorohydrate, Sumachlor, Aluminum chlorhydroxide, Aluminum hydroxychloride, Alüminyum Klorohidrate, Alüminyum Klorhidroksit Aluminum(III) Chloride aluminium(3+) chloride aluminiumtrichloride TK Flock Aloxicoll Aluminum monochloride Locron AlCl3 trichloroalumane Oulupac 180 Sansudor Berukotan AC-P Hessidrex WT Kempac 20 Aluminol ACH PAC 250A Aluminiumchloride Astringen 10 Locron S Aluminium chloride, Anhydrous Aluminium, (chlorure d`) Aluminium(III)chloride Astringen 7784-13-6 Aluminium chloride Chlorhydrol Micro-Dry SUF trichloridoaluminium Locron P Kempac 10 E 200 (coagulant) Aluminum chloride (USP) Chlorhydrol Micro-Dry Chlorhydrol Cartafix LA 231-208-1 Basic aluminum chloride Aluminum chloride (8CI 9CI) ALUMINUM CHLORIDE 215-477-2 PAC 250AD aluminium(iii) trichloride Paho 2S 7446-70-0 TRICHLOROALUMINUM Aluminum trichloride Kemwater PAX 14 trichloroaluminium Banoltan White [AlCl3] Drysol Aquarhone 18 ALUMINIUMCHLORIDESOLUTION PACK 300M OCAL Hydrofugal PALC Cawood 5025 aluminium(III) chloride Wickenol cps 325 aluminium trichloride Gelsica Aluminum Chlorohydrate, Sumachlor, Aluminum chlorhydroxide, Aluminum hydroxychloride, Alüminyum Klorohidrate, Alüminyum Klorhidroksit Alüminyum klorohidrat. Alüminyum hidroksiklorür. Aluminum Chlorohydrate , Aluminium hydroxychloride , Aluminum chlorhydroxide; Aluminum chlorhydrate; Aluminum chlorhydrol; Aluminum hydroxide chloride; Aluminum hydroxychloride; Aluminum hydroxychloride, dihydrate; Aluminum monochloride pentahydroxide; Basic aluminum chlorate (Al2(OH)5Cl); Chloropentahydroxydialuminum; Locron Extra; Locron L; Locron flakes; Locron powder; Locron solution; Macrospherical 95; Wickenol 303; Wickenol 321; Wickenol 323; Wickenol 324; Aluminum chloride hydroxide (Al2Cl(OH)5); Aluminum chlorohydroxide, dihydrate; Dialuminium chloride pentahydroxide; [ChemIDplus] Aluminiumchloridhydroxid; Aluminiumhydrochlorid; Aluminiumhydroxichlorid; Aluminiumhydroxychlorid; Aluminum chloride; Basic aluminum chloride; Basisches Aluminiumchlorid; Dialuminium chloride pentahydroxide; Locron P; Locron S; Tanfix A; Aluminum Chlorohydrate, Sumachlor, Aluminum chlorhydroxide, Aluminum hydroxychloride, Alüminyum Klorohidrate, Alüminyum Klorhidroksit Aluminum(III) Chloride aluminium(3+) chloride aluminiumtrichloride TK Flock Aloxicoll Aluminum monochloride Locron AlCl3 trichloroalumane Oulupac 180 Sansudor Berukotan AC-P Hessidrex WT Kempac 20 Aluminol ACH PAC 250A Aluminiumchloride Astringen 10 Locron S Aluminium chloride, Anhydrous Aluminium, (chlorure d`) Aluminium(III)chloride Astringen 7784-13-6 Aluminium chloride Chlorhydrol Micro-Dry SUF trichloridoaluminium Locron P Kempac 10 E 200 (coagulant) Aluminum chloride (USP) Chlorhydrol Micro-Dry Chlorhydrol Cartafix LA 231-208-1 Basic aluminum chloride Aluminum chloride (8CI 9CI) ALUMINUM CHLORIDE 215-477-2 PAC 250AD aluminium(iii) trichloride Paho 2S 7446-70-0 TRICHLOROALUMINUM Aluminum trichloride Kemwater PAX 14 trichloroaluminium Banoltan White [AlCl3] Drysol Aquarhone 18 ALUMINIUMCHLORIDESOLUTION PACK 300M OCAL Hydrofugal PALC Cawood 5025 aluminium(III) chloride Wickenol cps 325 aluminium trichloride Gelsica Aluminum Chlorohydrate, Sumachlor, Aluminum chlorhydroxide, Aluminum hydroxychloride, Alüminyum Klorohidrate, Alüminyum Klorhidroksit Alüminyum klorohidrat. Alüminyum hidroksiklorür. Aluminum Chlorohydrate , Aluminium hydroxychloride , Aluminum chlorhydroxide; Aluminum chlorhydrate; Aluminum chlorhydrol; Aluminum hydroxide chloride; Aluminum hydroxychloride; Aluminum hydroxychloride, dihydrate; Aluminum monochloride pentahydroxide; Basic aluminum chlorate (Al2(OH)5Cl); Chloropentahydroxydialuminum; Locron Extra; Locron L; Locron flakes; Locron powder; Locron solution; Macrospherical 95; Wickenol 303; Wickenol 321; Wickenol 323; Wickenol 324; Aluminum chloride hydroxide (Al2Cl(OH)5); Aluminum chlorohydroxide, dihydrate; Dialuminium chloride pentahydroxide; [ChemIDplus] Aluminiumchloridhydroxid; Aluminiumhydrochlorid; Aluminiumhydroxichlorid; Aluminiumhydroxychlorid; Aluminum chloride; Basic aluminum chloride; Basisches Aluminiumchlorid; Dialuminium chloride pentahydroxide; Locron P; Locron S; Tanfix A; 101707-17-9, 11097-68-0, 114442-10-3, 1327-41-9, 135864-70-9, 143230-54-0, 144388-28-3, 162535-15-1, 167140-05-8, 245064-40-8, 32056-15-8, 37226-46-3, 39380-80-8, 56803-01-1, 56831-66-4, 64441-77-6, 79586-02-0, 8012-66-6, 84861-98-3, 98493-35-7, ACH 325, ACH 331, ACH 7-321, AlCl3, Aloxicoll, Aluminol ACH, Aluminum chlorhydrate, Aluminum chlorhydroxide, Aluminum chloride, basic, ALUMINUM CHLORIDE HYDROXIDE, Aluminum chloride hydroxide oxide, basic, Aluminum chloride oxide, Aluminum chlorohydrate (anhydrous), Aluminum chlorohydrol, Aluminum hydroxide chloride, Aluminum hydroxychloride, Aluminum oxychloride, aluminum trichloride, Aquarhone 18, Astringen, Astringen 10, Banoltan White, Basic aluminum chloride, Basic aluminum chloride, hydrate, Berukotan AC-P, Cartafix LA, Cawood 5025, Chlorhydrol, Chlorhydrol Micro-Dry, Chlorhydrol Micro-Dry SUF, Dialuminium-chlorid-pentahydroxid, E 200, E 200 (coagulant), EINECS 215-477-2, Gelsica, Hessidrex WT, HPB 5025, Hydral, Hydrofugal, Kempac 10, Kempac 20, Kemwater PAX 14, Locron, Locron P, Locron S, Nalco 8676, OCAL, Oulupac 180, PAC, PAC 250A, PAC 250AD, PACK 300M, PAC (salt), Paho 2S, PALC, Sansudor, Wickenol cps 325; 101707-17-9, 11097-68-0, 114442-10-3, 1327-41-9, 135864-70-9, 143230-54-0, 144388-28-3, 162535-15-1, 167140-05-8, 245064-40-8, 32056-15-8, 37226-46-3, 39380-80-8, 56803-01-1, 56831-66-4, 64441-77-6, 79586-02-0, 8012-66-6, 84861-98-3, 98493-35-7, ACH 325, ACH 331, ACH 7-321, AlCl3, Aloxicoll, Aluminol ACH, Aluminum chlorhydrate, Aluminum chlorhydroxide, Aluminum chloride, basic, ALUMINUM CHLORIDE HYDROXIDE, Aluminum chloride hydroxide oxide, basic, Aluminum chloride oxide, Aluminum chlorohydrate (anhydrous), Aluminum chlorohydrol, Aluminum hydroxide chloride, Aluminum hydroxychloride, Aluminum oxychloride, aluminum trichloride, Aquarhone 18, Astringen, Astringen 10, Banoltan White, Basic aluminum chloride, Basic aluminum chloride, hydrate, Berukotan AC-P, Cartafix LA, Cawood 5025, Chlorhydrol, Chlorhydrol Micro-Dry, Chlorhydrol Micro-Dry SUF, Dialuminium-chlorid-pentahydroxid, E 200, E 200 (coagulant), EINECS 215-477-2, Gelsica, Hessidrex WT, HPB 5025, Hydral, Hydrofugal, Kempac 10, Kempac 20, Kemwater PAX 14, Locron, Locron P, Locron S, Nalco 8676, OCAL, Oulupac 180, PAC, PAC 250A, PAC 250AD, PACK 300M, PAC (salt), Paho 2S, PALC, Sansudor, Wickenol cps 325; lokron s; lokron; s; p; lokron; lokron p; lokrons; lokronp; lokrones; lokrronpe; lokronpe; lokoron; lokorons;lokoronespe;lokronespe; LOCRON S; LOCRON P; S; P; LOCRON; LOKRON; LOKRONES; LOKRONPE; LOCRONES; LOCRONPE

Aluminum chloride hydroxide anhydrous

1327-41-9 [RN]

Aloxicoll

aluminium chlorohydrate

Aluminium chlorohydric acid

Aluminol ACH

aluminum chlorhydrate

Aluminum chlorhydroxide

ALUMINUM CHLORIDE HYDROXIDE

Aluminum chloride hydroxide oxide, basic

Aluminum chloride oxide

Aluminum chloride, basic

Aluminum chlorohydrate (anhydrous)

Aluminum chlorohydrol

ALUMINUM HYDROXIDE CHLORIDE

ALUMINUM HYDROXYCHLORIDE

Aluminum oxychloride

Aquarhone 18

Astringen

Astringen 10

Banoltan White

Basic aluminum chloride

Basic aluminum chloride, hydrate

Berukotan AC-P

Cartafix LA

Chlorhydrol

Chlorhydrol Micro-Dry

Chlorhydrol Micro-Dry SUF

CHLOROALUMANOL

Dialuminium-chlorid-pentahydroxid

Gelsica

Hessidrex WT

Hydral

Hydrofugal

Kempac 10

Kempac 20

Kemwater PAX 14

Locron

Locron P

Locron S

MFCD00143587

MFCD00197734

OCAL

Oulupac 180

PAC

PAC (salt)

PACK 300M

Paho 2S

PALC

Polyaluminium chloride (PAC)

Sansudor

Wickenol cps 325

An antiperspirant is a chemical agent that reduces perspiration or sweating. The active ingredients of roll-on, spray and powder formulations are traditionally the metallic salts aluminium chloride and aluminium chlorohydrate. These are formulated into preparations of varying strengths. More concentrated solutions are used to control excessive sweating (hyperhidrosis).

Newer generation antiperspirants contain aluminium zirconium compounds. These are better tolerated by the skin and are less likely to cause irritation or aggravation to razor burn.

Diphemanil methylsulfate powder may also be used to reduce perspiration. It is particularly useful on an amputation stump to reduce irritation by a prosthesis.

Deodorants are not antiperspirants. Deodorants do not prevent sweating. Their aim is to mask the smell produced by sweat-eating bacteria. An antiperspirant preparation may contain a deodorant.

How do antiperspirants work?

Aluminium-based antiperspirants work by blocking the sweat ducts, thereby reducing the amount of sweat that reaches the skin’s surface. Aluminium salts are soluble as long as the formulation is acidic (low pH). When they are applied to the skin and come in contact with sweat, the pH rises causing the aluminium salts to precipitate out and form a plug over the sweat glands. Sweat continues to be produced by the sweat gland but it just isn't able to reach the surface of the skin.

Diphemanil methylsulfate is a drug that opposes the action of the parasympathetic nerves that control sweat production.

How do you use an antiperspirant?

A higher concentration antiperspirant is usually more effective than a low concentration or aluminium-free preparation. However, increasing the strength can also increase the potential for side effects. A couple of simple rules apply to their use.

Apply to dry skin, after a cool shower at bedtime. During sleep sweating is limited and the active ingredients have a better chance of being absorbed into the sweat glands. Wash off in the morning.

Apply on a regular basis as directed by your doctor. Initially, this may be 7-10 nights in a row, then reducing to every other night for one week. When improvements are seen, patients can move to a maintenance schedule of using it once every 7–12 days. Over time reapplication may be needed even less frequently.

Where can you use an antiperspirant?

Antiperspirants are often the first line of treatment for underarm hyperhidrosis as they are readily available from the pharmacy or supermarket. Antiperspirants may also be used in other sites of the body that tend to sweat excessively. If standard preparations fail, stronger strength preparations are available at your pharmacy.

Sweat is a dilute salt solution produced by eccrine sweat glands spontaneously or in response to heat, exercise and stressful events. Eccrine sweat is initially odourless but can start to smell if bacteria get a chance to break down the stale sweat. The eccrine glands are distributed over the entire body but are most numerous under the arms and on the palms and soles.

Apocrine sweat glands are located under the arms, around the breasts and in the groin. After puberty, they produce a thick secretion that contains pheromones, the “personal scent” that most people find unpleasant. In addition, bacteria that normally live on the skin break down apocrine sweat and this produces offensive body odour. Body odour is worse if there are more bacteria present or the level of apocrine sweat production is high. Antiperspirants also help to reduce apocrine sweat production.

ATAMAN Aluminum chlorohydrate IN WATER TREATMENT: Flocculant to remove colloidal impurities, phosphate and filtration aid.

MODE OF ACTION:

At pH values above 5 Aluminum chlorohydrate starts to form very fine Aluminiumhydroxide precipitates which are most suitable to trap particulate impurities in swimming pool

water. Colloidal impurities, which make the water turbid, are difficult to remove because of their very small particle-size.

The poly-cationic character of Locron and the high charge-density force the colloidal impurities to flocculate as a result of destabilization. The formed precipitates and the Aluminiumhydroxide gels form stable floccules, which are easy to remove by filtration or settling.

Compared with Aluminiumsulfate and Polyaluminiumchloride the destabilization behavior of Locron on colloidal impurities is outstanding. Phosphate could also be

eliminated under formation of water-insoluble Aluminiumphosphate. Because of the low content of anions (chloride) in Aluminum chlorohydrate the pH value will not be affected and corrosion of stainless-steel basins it not an issue.

APPLICATION

The dosage of ATAMAN-Aluminum chlorohydrate to the swimming pool water should work continuously with a solution containing 1-5 wt-% of the solid salt dissolved in water. Dosing pumps

should be used to bring the flocculant into the circulation pipes. Due to the fast flocculation well-formed floccules can be separated in the connected filter. The consumption of flocculant depends on temperature, impurity level (number of attendance), environmental conditions, on the used installation and circulation quantity.

ADVANTAGES OF ATAMAN-Aluminum chlorohydrate

As result of the very high basicity Aluminum chlorohydrate inserts less anions (chloride) compared to other flocculants like Polyaluminiumchloride or Aluminiumsulfate. This brings a huge advantage for avoiding corrosion and drop of pH.

Compared to Aluminiumsulfate the Locron consumption is much lower avoiding accumulation of salt.

The high efficacy of Locron increases the durability of the filtration system by a factor of 2 – 4 and reducing the number of recovery cycles significantly. This reduction of filter recoveries and the reduced amount of water for rinsing is related to cost savings.

LOCRON S

Locron S

Locron S , belirli alüminyum ait bir grup olduğu tuzları , aşağıdaki genel formüle sahip olan , Al , n CI (3n-m) ( OH ) m . Kozmetiklerde ter önleyici ve su arıtmada pıhtılaştırıcı olarak kullanılır .

Su arıtımında, bu bileşik bazı durumlarda yüksek yük nedeniyle tercih edilir , bu da askıya alınmış malzemelerin istikrarsızlaştırılması ve çıkarılmasında alüminyum sülfat , alüminyum klorür ve çeşitli polialüminyum klorür (PAC) ve polialüminyum gibi diğer alüminyum tuzlarından daha etkili olmasını sağlar. alüminyum yapısının Locron S tan daha düşük bir net yük ile sonuçlandığı klorisülfat . Ayrıca, HCl'nin yüksek derecede nötralizasyonu, diğer alüminyum ve demir tuzlarına kıyasla, arıtılmış su pH'ı üzerinde minimum etki ile sonuçlanır.

Locron S ayrıca, çözünmüş organik maddeleri ve süspansiyonda bulunan koloidal partikülleri gidermek için su ve atık su arıtma işlemlerinde bir pıhtılaştırıcı olarak kullanılır .

Alzheimer Derneği tıbbi ve bilimsel ilişkiler kıdemli yardımcı direktörü Heather M. Snyder, "Alzheimer ve alüminyum arasındaki bağlantıya bakan çok fazla araştırma vardı ve önermek için kesin bir kanıt yoktu. "bir bağlantı var". [5]

Bununla birlikte, zaman içinde toksik birikme riski göz ardı edilmediğinden, kozmetiklerde Locron S kullanımı konusunda endişe devam etmektedir. [7] Tüketici Güvenliği (SCCS) Bilimsel Komite halen zehirli yükselen atmosferde riskini değerlendirmek için dermal penetrasyon yoluyla Locron S gelişmeleri bizlere analiz etmek için bir çalışma tasarlıyor. [8]

Alüminyum metalin hidroklorik asit ile reaksiyonu sonucu ortaya çıkan hidrojenle ilgili patlama tehlikesi nedeniyle , en yaygın endüstriyel uygulama, alüminyum hidroksitin hidroklorik asit ile reaksiyona sokulmasıyla bir Locron S (ACH) çözeltisi hazırlamaktır . ACH ürünü, açık bir karıştırma tankında buhar kullanılarak 100 ° C'de alüminyum külçe ile reaksiyona sokulur. Al / ACH oranı ve izin verilen reaksiyon süresi, PAC n / m oranının polimer formunu belirler.

Locron S, terlemeyi azaltan ve hafif bir koku giderici etkiye sahip hafif bir büzücüdür. Bu nedenle Locron S, çok çeşitli ter önleyici ve deodorant formülasyonlarında kullanılır.

Locron S, terlemeyi önleyici ürünlerde aktif bir bileşen olarak dünya çapında uzun yıllardır büyüyen bir ölçekte kullanılmaktadır. Uzun süreli kullanımda da genellikle iyi tolere edilir. Locron S iyi tolere edilmesine rağmen, her biri kendi içinde tahriş edici olmayan ürünlerin kombinasyonundan cilt tahrişine neden olmadığından kuşkulanmak için nihai terlemeyi önleyici / deodorant formülasyonu ile dermatolojik çalışmalar yapılmalıdır.

Pompa spreyleri veya rulolar gibi sulu formülasyonlar için 24 saatlik bir etki genellikle yaklaşık% 10 aktif konsantrasyonda görülür (yani% 20 Locron® L, L.ZA veya LIC).

Sulu çözeltilerin hazırlanması için Locron® P yerine Locron S kullanılmalıdır, çünkü eski su içinde daha hızlı çözünür. Ayrıca, Locron S çözeltileri daha fazla berraklığa sahiptir, ancak optimum berraklık ancak çözelti yaklaşık 24 saat bekletildikten sonra elde edilir.

Locron S ve P higroskopiktir ve bu nedenle kuru bir yerde muhafaza edilmelidir. Kaplar açıldıktan sonra, içeriğin gecikmeden kullanılması gerekir, çünkü atmosferdeki nemin adsorbe edilmesinden kaynaklanan aglomerasyon riski vardır. Aglomeratlar genellikle aerosol ürünlerinde valf tıkanmasına neden olur.

Locron S

Locron S, AlnCI (3n-m) (OH) m genel formülüne sahip belirli bir alüminyum tuzları grubudur. Deodorantlarda ve ter önleyicilerinde ve su arıtımında pıhtılaştırıcı olarak kullanılır.

Su arıtımında bu bileşik, yüksek şarjından ötürü tercih edilmektedir, bu da, alüminyum sülfat, alüminyum klorür ve çeşitli polialüminyum klorür ve polialüminyum klorisülfat formları gibi diğer alüminyum tuzlarına kıyasla süspansiyon halindeki materyallerin dengesizleştirilmesi ve uzaklaştırılmasında daha etkili olmasını sağlar Alüminyum yapının Locron Stan daha düşük bir net şarj ile sonuçlandığını göstermektedir. Ayrıca, HC1'nin yüksek seviyede nötralizasyonu, diğer alüminyum ve demir tuzlarına kıyasla, işlenmiş su pH'sında en düşük etkiyi sağlar.

Su arıtma kimyasal Locron S, İnorganik makromoleküler bileşik; Renksiz veya açık sarı katı toz, korozyona uğrayan suda çözünür.

KİMYASAL VE FİZİKSEL ÖZELLİKLER

Locron SIN DEPOLANMASI

Locron S est un astringent doux qui réduit la transpiration et a un léger effet désodorisant. Le Locron S est donc utilisé dans une large gamme de formulations anti-transpirantes et déodorantes.

Locron S est utilisé à une échelle croissante depuis de nombreuses années à travers le monde comme ingrédient actif dans les produits anti-transpirants. Il est généralement bien toléré également lors d'une utilisation à long terme. Bien que Locron S soit bien toléré, des essais dermatologiques devraient être menés avec la formulation antisudorifique / déodorante finale pour établir sans aucun doute qu'aucune irritation cutanée n'est causée par la combinaison de produits, chacun étant en soi non irritant.

Pour les formulations aqueuses comme les vaporisateurs à pompe ou les roll-ons, un effet de 24 h est généralement observé à environ 10% de concentration active (c'est-à-dire 20% de Locron® L, L.ZA ou LIC).

Locron S doit être utilisé plutôt que Locron® P pour préparer des solutions aqueuses car le premier se dissout plus rapidement dans l'eau. De plus, les solutions de Locron S ont une plus grande clarté, bien qu'une clarté optimale ne soit obtenue qu'après que la solution a été laissée au repos pendant environ 24 h.

Locron S et P sont hygroscopiques et doivent donc être conservés dans un endroit sec. Une fois les conteneurs ouverts, leur contenu doit être utilisé sans délai car il existe un risque d'agglomération dû à l'adsorption d'humidité de l'atmosphère. Les agglomérats sont fréquemment à l'origine du blocage des valves dans les produits aérosols.