1-9 A-D E-G H-M N-P Q-S T-Z

GENAPOL PN 30

GENAPOL PN 30

 

GENAPOL PN 30; genapol ed 3060; Ethylenediamine, ethoxylated and propoxylated; Ethylenediamine, ethoxylated and propoxylated; 1,2-Ethanediamine propylene oxide ethylene oxide polymer; Ethylenediamine propoxylateethoxylate; 1,2-Ethanediamine, polymer with 2-methyloxirane and oxirane; 1,2-Ethanediamine propylene oxide ethylene oxide Polymer; 1,2-Ethanediamine, methyloxirane, oxirane Polymer; EC 500-047-1; Ethoxylated, propoxylated ethylenediamine; UNII-33F4HZ53CP; 1, 2-Ethanediamine, polymer with methyl oxirane and oxirane, minimum number average molecular weight (in amu), 1,100; Ethylene oxide-propylene oxide copolymer ethylenediamine ether

GENAPOL PN 30
Cas Number : 26316-40-5
 
Genapol PN 30 is a EO/PO block copolymer and used as a low foaming surfactant and lubricity improver in metal working fluids and metal cleaners. It is stable against hard water. In combination with corrosion inhibitors like Hostacor IT, Hostacor BIT or Hostacor BI, clear water soluble metal working fluids with good corrosion protecting and lubricating properties are obtained.
Benefits of Genapol PN 30
-Low foaming
-Genapol pn 30 has good lubricity properties
-Genapol pn 30 has hard water stable
Technical Data of Genapol pn 30
Genapol pn 30's Product group PO/EO/PO block polymer
Genapol pn 30'sCloud point (1% in water) 30 - 32 °C
Cloud point (5g in 25g 25% BDG-solution) 27.6 - 29.6 °C
Reichert test (5% in water) 12 mm2
Genapol pn 30's pH (1% in water) 10 - 11
Application of Genapol pn 30
• Synthetic metal working fluids
• Mild alkaline type metal cleaner 
• Alkaline type metal cleaner

 

 

PHYSICAL AND CHEMICAL PROPERTIES OF GENAPOL PN 30
Appearance of Genapol pn 30: Liquid
Colour of Genapol pn 30: yellow
Odour: characteristic
Odour Threshold: not determined
Genapol pn 30's pH: 10 - 11 (68 °F / 20 °C)
Concentration of Genapol pn 30: 10 g/l
pour point of Genapol pn 30: 5 °F / -15 °C
Method: ISO 3016
Boiling point of Genapol pn 30: > 680 °F / > 360 °C
Method: Calculated by Syracuse.
Genapol pn 30's Flash point: 428 °F / 220 °C
Method: DIN 51584 (open cup)
Evaporation rate of Genapol pn 30: not determined
Flammability of Genapol pn 30 (solid, gas): Not applicable
Self-ignition: Not applicable
Burning number: Not applicable
Upper explosion limit / 
upper flammability limit: not determined
Lower explosion limit / 
Lower flammability limit: not determined
Genapol pn 30's vapour pressure: < 0.001 Pa (77 °F / 25 °C)
Method: Calculated by Syracuse.
Relative vapour density: not determined
Density of Genapol pn 30: 1.03 g/cm3 (68 °F / 20 °C)
Method: DIN 51757
COMPOSITION OF GENAPOL PN 30
Block copolymer of ethylene diamine, propylene oxide and ethylene oxide
PRODUCT PROPERTIES GENAPOL PN 30
Active content of Genapol pn 30 approx. 100 %
Genapol pn 30's appearance (20°C) yellowish liquid (colour can change darker by storage)
Ionicity of Genapol pn 30 nonionic
STORAGE STABILITY OF GENAPOL PN 30
Keep container tightly closed, cool and dry. Protect from extreme heat and cold. Storage emperature should be between 5 - 40°C. Maximum storage time is 2 years. Sensitive to frost. In case of the product becoming opaque, thickening or being frozen due to the effects of cold, allow to thaw slowly at room temperature. Stir briefly before use. 
APPLICATION OF GENAPOL PN 30
In combination with corrosion inhibitors like Hostacor IT, Hostacor BIT or Hostacor BI, clear water soluble metal working fluids with good corrosion protecting and lubricating properties are obtained.
APPLICATION PROPERTIES OF GENAPOL PN 30
Genapol PN 30 is a low foaming lubricant for synthetic metal working fluids.

 

 


Genapol PN 30, bir EO / PO blok kopolimeridir ve metal işleme sıvılarında ve metal temizleyicilerde düşük köpüren yüzey aktif madde ve kayganlık artırıcı olarak kullanılır. Genapol pn 30, sert suya dayanıklıdır. Hostacor IT, Hostacor BIT veya Hostacor BI gibi korozyon inhibitörleri ile kombinasyon halinde, iyi korozyon koruma ve yağlama özelliklerine sahip berrak suda çözünür metal işleme sıvıları elde edilir.
Genapol PN 30'un Faydaları
-Düşük köpüklenme
-İyi kayganlık özellikleri
-Sert su kararlılığı
Genapol pn 30 Teknik Verileri
Ürün grubu PO / EO / PO blok polimer
Bulutlanma noktası (suda% 1) 30-32 ° C
Bulutlanma noktası (25g% 25 BDG çözümünde 5g) 27.6 - 29.6 ° C
Reichert testi (suda% 5) 12 mm2
Genapol pn 30 pH (suda% 1) 10-11
Genapol pn 30 uygulaması
• Genapol pn 30 sentetik metal işleme sıvılarında uygulanır.
• Genapol pn 30 hafif alkali tip metal temizleyici olarak uygulanır.
• Genapol pn 30 alkali tipi metal temizleyici olarak uygulanır.

 

 

GENAPOL PN 30 FİZİKSEL VE KİMYASAL ÖZELLİKLER
Genapol pn 30 görünümü: Sıvı
Genapol pn 30'un rengi: sarı
Koku: karakteristik
Koku Eşiği: belirlenmedi
Genapol pn 30'un pH'ı: 10-11 
(68 ° F / 20 ° C)
Genapol pn 30'un konsantrasyonu: 10 g / l
Genapol pn 30'un akma noktası: 5 ° F / -15 ° C
Yöntem: ISO 3016
Genapol pn 30'un kaynama noktası: > 680 ° F /> 360 ° C
Yöntem: Syracuse tarafından hesaplanmıştır.
Genapol pn 30'un parlama noktası: 428 ° F / 220 ° C
Yöntem: DIN 51584 (açık kap)
Genapol pn 30'un buharlaşma hızı: belirlenmemiş
Tutuşabilirlik (katı, gaz): Uygulanamaz
Kendiliğinden tutuşma: Uygulanamaz
Yazma numarası: Uygulanamaz
Üst patlama sınırı /
üst yanıcılık sınırı: belirlenmedi
Alt patlama sınırı /
Alt yanıcılık sınırı: belirlenmedi
Genapol pn 30'un buhar basıncı: <0,001 Pa (77 ° F / 25 ° C)
Bağıl buhar yoğunluğu: belirlenmemiş
Genapol pn 30'un yoğunluğu: 1,03 g / cm3 (68 ° F / 20 ° C)
Yöntem: DIN 51757
GENAPOL PN 30'UN BİLEŞİMİ
Etilen diamin, propilen oksit ve etilen oksitin blok kopolimeri
ÜRÜN ÖZELLİKLERİ GENAPOL PN 30
Genapol pn 30'un aktif içeriği yakl. 100 %
Genapol pn 302un görünümü (20 ° C) sarımsı sıvı (depolama ile rengi koyulaşabilir)
İyonik olmayan
DEPOLAMA STABİLİTESİ
Kabı sıkıca kapalı tutun, serin ve kuru tutun. Aşırı sıcak ve soğuktan koruyun. Saklama sıcaklığı 5 - 40 ° C arasında olmalıdır. Maksimum saklama süresi 2 yıldır. Dona karşı hassastır. Ürünün soğuğun etkisiyle matlaşması, koyulaşması veya donması durumunda oda sıcaklığında yavaş yavaş çözülmesini bekleyin. Kullanmadan önce kısaca karıştırın.
GENAPOL PN 30 UYGULAMASI
Hostacor IT, Hostacor BIT veya Hostacor BI gibi korozyon inhibitörleri ile birlikte, iyi korozyon koruma ve yağlama özelliklerine sahip berrak suda çözünür metal işleme sıvıları elde edilir.
GENAPOL PN 30'UN UYGULAMA ÖZELLİKLERİ
Genapol PN 30, sentetik metal işleme sıvıları için düşük köpüren bir yağlayıcıdır.

 

Ataman Chemicals © 2015 All Rights Reserved.