BASF AGNIQUE PG 8107-G SUPPLIER AND DISTRIBUTOR IN TURKEY
Ataman Kimya is BASF’s distributor for Agnique PG 8107-G in Turkey and the surrounding region for agricultural chemicals, crop-protection formulations, water conditioning, drilling and mining industries.
BASF Agnique PG 8107-G is an aqueous solution of C8-C10 alkyl polyglucosides based on natural, plant-origin fatty alcohols. It is a nonionic surfactant solution designed for formulation systems where wetting, surface tension reduction, water compatibility and surfactant performance are required.
Agnique PG 8107-G is supplied as a brownish, clear and viscous liquid at room temperature. It contains approximately 70% active matter and approximately 30% water. Thanks to its alkyl polyglucoside chemistry, plant-origin raw material base, water solubility and strong surface activity, Agnique PG 8107-G can be evaluated in agrochemical and selected industrial formulation systems.
Ataman Kimya supplies BASF Agnique PG 8107-G to industrial customers and provides support for product documentation, samples, packaging, logistics, pricing, availability and application-specific discussions.
Contact Ataman Kimya to request:
Product Identification
|
Property |
Information |
|
Product name |
BASF Agnique PG 8107-G |
|
Product type |
Nonionic surfactant solution |
|
Chemical nature |
Aqueous solution of C8-C10 alkyl polyglucosides |
|
Raw material base |
Natural, plant-origin C8-C10 fatty alcohol |
|
Preservative content |
Free of preservatives |
|
BASF product number |
30528590 |
|
Product-specific CAS number |
Not assigned / not applicable for the mixture |
|
Product-specific EC number |
Not assigned / not applicable for the mixture |
|
Main surfactant component |
D-Glucopyranose, oligomers, decyl octyl glycosides |
|
Main surfactant CAS number |
68515-73-1 |
|
Main surfactant EC number |
500-220-1 |
|
Physical form |
Brownish, clear, viscous liquid |
|
Relevant use in BASF SDS |
Surfactants |
|
Chemical nature in SDS |
Aqueous solution based on Alkyl polyglycoside C8-10 |
Important Note on CAS Number and EC Number
Agnique PG 8107-G is an aqueous surfactant mixture, not a single pure chemical substance.
For this reason, the commercial product itself should not be presented as a pure substance with one single product-specific CAS number or EC number. The main surfactant component listed in the BASF Safety Data Sheet is:
|
Component |
CAS Number |
EC Number |
|
D-Glucopyranose, oligomers, decyl octyl glycosides |
68515-73-1 |
500-220-1 |
For purchasing, safety, regulatory and quality-control purposes, customers should always refer to the latest BASF Safety Data Sheet, Technical Information document and Certificate of Analysis supplied with the product.
What Is Agnique PG 8107-G?
Agnique PG 8107-G is a BASF nonionic surfactant solution based on alkyl polyglucosides, also known as APG surfactants. Alkyl polyglucosides are widely used in formulation systems because they combine surface activity, water compatibility and formulation flexibility.
Agnique PG 8107-G is based on natural, plant-origin C8-C10 fatty alcohols and is supplied as an aqueous solution. It is free of preservatives and has an active matter content of approximately 70%.
In formulation systems, Agnique PG 8107-G can be evaluated where wetting, surface tension reduction, water compatibility, foam formation and nonionic surfactant performance are required.
Alternative Names and Search Terms
Agnique PG 8107-G may also be searched or described as:
Key Benefits of BASF Agnique PG 8107-G
Nonionic Alkyl Polyglucoside Surfactant
Agnique PG 8107-G is a nonionic surfactant solution based on C8-C10 alkyl polyglucosides. Its nonionic character makes it suitable for a wide range of formulation concepts where compatibility with other ingredients is important.
Based on Plant-Origin Fatty Alcohol
Agnique PG 8107-G is based on natural, plant-origin C8-C10 fatty alcohols and belongs to the alkyl polyglucoside surfactant family.
Approximately 70% Active Matter
Agnique PG 8107-G contains approximately 70% active matter and approximately 30% water, making it a concentrated aqueous APG surfactant solution.
Strong Surface Activity
BASF technical information reports a surface tension of approximately 29 mN/m at 1 g/L in distilled water at 23°C. This supports its use where wetting and surface tension reduction are important.
Water Soluble and Water Compatible
Agnique PG 8107-G is soluble in water and miscible in distilled water in all proportions according to the BASF Safety Data Sheet. It also shows clear solubility in distilled water, potable water, caustic soda solution, hydrochloric acid solution and salt solution under the referenced BASF technical test conditions.
Useful Wetting Performance
BASF technical information reports wetting times of more than 300 seconds at 0.5 g/L, approximately 280 seconds at 1.0 g/L and approximately 80 seconds at 2.0 g/L under the referenced test conditions.
Foam Formation
Agnique PG 8107-G can generate foam in water-based systems. BASF technical information reports foam formation of approximately 650 cm³ under the referenced test conditions.
Readily Biodegradable
According to the BASF Safety Data Sheet, Agnique PG 8107-G is readily biodegradable according to OECD criteria.
Not Classified as Dangerous Goods for Transport
According to the BASF Safety Data Sheet, Agnique PG 8107-G is not classified as dangerous goods under ADR, RID, ADN, IMDG or IATA/ICAO transport regulations.
Applications of Agnique PG 8107-G
Agnique PG 8107-G for Agrochemicals and Crop Protection
Agnique PG 8107-G can be evaluated as a nonionic surfactant in selected agricultural and crop-protection formulation systems.
Potential agrochemical applications include:
Agnique PG 8107-G may help support wetting, surface tension reduction, dispersion behaviour and formulation performance in selected agrochemical systems.
Each formulation should be tested for:
Agnique PG 8107-G for Water Treatment and Water Conditioning
Agnique PG 8107-G can be evaluated as a nonionic surfactant component in selected industrial water-treatment and water-conditioning formulations.
Potential evaluation areas include:
Agnique PG 8107-G is an industrial-quality product. It should not be considered automatically suitable for direct potable-water applications. Any use in water-treatment or water-conditioning systems must be evaluated according to the final formulation, dosage, process conditions and applicable regulatory requirements.
Agnique PG 8107-G for Drilling and Oilfield Applications
Agnique PG 8107-G can be evaluated as a nonionic surfactant in selected drilling, wellbore-treatment and oilfield chemical formulations.
Potential evaluation areas include:
Its nonionic surfactant character, water compatibility and surface tension reduction can be useful in certain formulation concepts. Suitability must be confirmed through testing under actual temperature, salinity, pressure, rheology and compatibility conditions.
Agnique PG 8107-G for Mining and Mineral Processing
Agnique PG 8107-G can be evaluated as a nonionic surfactant in selected mining, mineral-processing and extraction-related chemical systems.
Potential evaluation areas include:
Performance depends on the complete formulation, mineral system, pH, temperature, water hardness, electrolyte content, foam behaviour and process design. Laboratory and pilot-scale testing are recommended before industrial use.
Typical Technical Properties
|
Property |
Typical or Reported Value |
|
Appearance |
Brownish, clear, viscous liquid |
|
SDS colour |
Brown |
|
Product type |
Nonionic surfactant solution |
|
Chemical nature |
Aqueous solution of C8-C10 alkyl polyglucosides |
|
BASF product number |
30528590 |
|
Product-specific CAS number |
Not assigned / not applicable for mixture |
|
Product-specific EC number |
Not assigned / not applicable for mixture |
|
Main surfactant CAS number |
68515-73-1 |
|
Main surfactant EC number |
500-220-1 |
|
Physical form at 23°C |
Liquid |
|
Active matter |
Approximately 70% |
|
Water content |
Approximately 30% |
|
pH value |
Approximately 8 |
|
SDS pH value |
7.0–9.5 |
|
Density at 20°C |
Approximately 1.161 g/cm³ |
|
Density at 70°C |
Approximately 1.128 g/cm³ |
|
Pour point |
Approximately −13°C |
|
Boiling point |
Approximately 100°C |
|
Dynamic viscosity at 23°C |
Approximately 3,400 mPa·s |
|
Surface tension |
Approximately 29 mN/m |
|
Solubility in water |
Soluble |
|
Vapour pressure at 20°C |
< 0.1 hPa |
|
Thermal decomposition |
> 350°C |
|
Shelf life |
At least 2 years in original packaging under proper conditions |
These values are provided for general guidance. The latest BASF specification, Safety Data Sheet and Certificate of Analysis should be used for purchasing, quality control, regulatory documentation and formulation approval.
Wetting and Foam Behaviour
According to BASF technical information, Agnique PG 8107-G shows the following wetting performance in distilled water at 23°C with 2 g soda ash/L:
|
Agnique PG 8107-G Concentration |
Wetting Time |
|
0.5 g/L |
> 300 s |
|
1.0 g/L |
Approximately 280 s |
|
2.0 g/L |
Approximately 80 s |
Foam formation under the referenced test conditions is approximately 650 cm³ after 30 seconds.
These values show that concentration, water composition and formulation conditions are important for evaluating wetting and foam behaviour.
Solubility and Formulation Behaviour
BASF technical information reports the following solubility behaviour at 10% concentration and 23°C:
|
Medium / Solvent |
Behaviour |
|
Distilled water |
Clear solution |
|
Potable water |
Clear solution |
|
Caustic soda, 5% |
Clear solution |
|
Hydrochloric acid, 5% |
Clear solution |
|
Salt solution, 5% |
Clear solution |
|
Solvent naphtha |
Insoluble / phase separation |
|
Ethanol / Isopropanol |
Insoluble / phase separation |
|
Aromatic hydrocarbons |
Insoluble / phase separation |
Final compatibility must always be tested in the complete formulation, especially in systems containing active ingredients, salts, fertilizers, water conditioners, oils, solvents, surfactants or other formulation additives.
Viscosity and Temperature Behaviour
The relationship between viscosity and temperature is important when Agnique PG 8107-G is stored, pumped or transported. The product becomes significantly more viscous at low temperature and becomes easier to handle as temperature increases.
BASF technical information reports viscosity after water addition at 23°C:
|
Water Addition |
Viscosity |
|
+10% |
850 mPa·s |
|
+20% |
250 mPa·s |
|
+30% |
100 mPa·s |
|
+40% |
40 mPa·s |
|
+50% |
20 mPa·s |
|
+60% |
<20 mPa·s |
|
+70% |
<20 mPa·s |
These values are useful for formulation and handling trials, but final processing behaviour should be validated under actual production conditions.
Storage and Handling
Agnique PG 8107-G should be stored and handled under good industrial hygiene and safety practice.
Recommended storage and handling conditions include:
Suitable materials for tanks and drums include:
Agnique PG 8107-G has a shelf life of at least 2 years in its original packaging when stored properly and when drums are kept tightly sealed.
Safety and Regulatory Information
According to the BASF Safety Data Sheet, Agnique PG 8107-G is classified under UN GHS criteria as:
Hazard statements:
Signal word:
Danger
Hazard-determining component for labelling:
Recommended safety precautions include:
According to the BASF Safety Data Sheet, Agnique PG 8107-G is not classified as dangerous goods under ADR, RID, ADN, IMDG or IATA/ICAO transport regulations.
Agnique PG 8107-G is readily biodegradable according to OECD criteria and does not fulfill the criteria for PBT or vPvB under the referenced REACH assessment.
Why Choose Ataman Kimya for BASF Agnique PG 8107-G?
Ataman Kimya supports industrial customers seeking reliable supply of BASF Agnique PG 8107-G in Turkey and the surrounding region.
Customers benefit from:
Frequently Asked Questions
What is Agnique PG 8107-G?
Agnique PG 8107-G is a BASF aqueous nonionic surfactant solution based on C8-C10 alkyl polyglucosides. It is supplied as a brownish, clear, viscous liquid and can be evaluated in selected agrochemical and industrial formulation systems.
What is the CAS number of Agnique PG 8107-G?
Agnique PG 8107-G is a mixture, so the commercial product does not have a single product-specific CAS number. The main surfactant component listed in the BASF Safety Data Sheet is D-Glucopyranose, oligomers, decyl octyl glycosides, with CAS number 68515-73-1.
What is the EC number of Agnique PG 8107-G?
Agnique PG 8107-G is a mixture, so the commercial product does not have a single product-specific EC number. The main surfactant component listed in the BASF Safety Data Sheet has EC number 500-220-1.
What is the BASF product number of Agnique PG 8107-G?
The BASF product number of Agnique PG 8107-G is 30528590.
What is the chemical nature of Agnique PG 8107-G?
BASF technical information describes Agnique PG 8107-G as an aqueous solution of alkyl polyglucosides based on natural, plant-origin fatty alcohol C8-C10 and free of preservatives.
What is Agnique PG 8107-G used for?
Agnique PG 8107-G is used as a surfactant in industrial formulation systems. It can be evaluated in agrochemical, water-conditioning, drilling and mining-related formulations where nonionic surfactant performance is required.
Can Agnique PG 8107-G be used in agrochemical formulations?
Yes. Agnique PG 8107-G can be evaluated as a nonionic surfactant in selected crop-protection and agrochemical formulation systems. Suitability must be confirmed with the final formulation, active ingredient and application conditions.
Is Agnique PG 8107-G soluble in water?
Yes. Agnique PG 8107-G is soluble in water and miscible in distilled water in all proportions according to the BASF Safety Data Sheet.
What is the active matter content of Agnique PG 8107-G?
According to BASF technical information, Agnique PG 8107-G has approximately 70% active matter.
What is the water content of Agnique PG 8107-G?
According to BASF technical information, Agnique PG 8107-G has approximately 30% water content.
What is the pH of Agnique PG 8107-G?
BASF technical information reports a pH value of approximately 8. The BASF Safety Data Sheet reports a pH range of 7.0–9.5.
How should Agnique PG 8107-G be stored?
Agnique PG 8107-G should be stored with tightly sealed containers. The storage temperature should not exceed 40°C, and the product should be protected from temperatures above 50°C. Bulk material should be protected from solidification.
What is the shelf life of Agnique PG 8107-G?
Agnique PG 8107-G has a shelf life of at least 2 years in its original packaging when stored properly and when drums are kept tightly sealed.
Is Agnique PG 8107-G classified as hazardous under GHS?
Yes. According to the BASF Safety Data Sheet, Agnique PG 8107-G is classified as Eye Damage Category 1 and Aquatic Acute Category 3, with hazard statements H318 and H402.
Is Agnique PG 8107-G classified as dangerous goods for transport?
No. According to the BASF Safety Data Sheet, Agnique PG 8107-G is not classified as dangerous goods under ADR, RID, ADN, IMDG or IATA/ICAO transport regulations.
Is Agnique PG 8107-G biodegradable?
Yes. According to the BASF Safety Data Sheet, Agnique PG 8107-G is readily biodegradable according to OECD criteria.
Can Agnique PG 8107-G be used in water treatment applications?
Agnique PG 8107-G can be evaluated as a nonionic surfactant component in selected industrial water-treatment and water-conditioning formulations. Suitability must be confirmed according to the final formulation and regulatory requirements.
Can Agnique PG 8107-G be used in drilling applications?
Agnique PG 8107-G can be evaluated in selected drilling, wellbore-treatment and oilfield chemical formulations where water-compatible nonionic surfactant functionality is required.
Can Agnique PG 8107-G be used in mining applications?
Agnique PG 8107-G can be evaluated as a nonionic surfactant in selected mining and mineral-processing formulations. Laboratory and pilot-scale testing are recommended before industrial use.
Where can I buy BASF Agnique PG 8107-G in Turkey?
BASF Agnique PG 8107-G can be supplied by Ataman Kimya, BASF’s distributor for Turkey and the surrounding region for agricultural chemicals, water conditioning, drilling and mining industries.
Request a Quote for BASF Agnique PG 8107-G
Contact Ataman Kimya for current information regarding:
Product: BASF Agnique PG 8107-G
Chemical nature: Aqueous solution of C8-C10 alkyl polyglucosides
Product-specific CAS Number: Not assigned / not applicable for mixture
Product-specific EC Number: Not assigned / not applicable for mixture
Main surfactant CAS Number: 68515-73-1
Main surfactant EC Number: 500-220-1
BASF Product Number: 30528590
Contact Ataman Kimya to request a quotation for BASF Agnique PG 8107-G.
