BASF AGNIQUE PG 8105-G SUPPLIER AND DISTRIBUTOR IN TURKEY
Ataman Kimya is BASF’s distributor for Agnique PG 8105-G in Turkey and the surrounding region for agricultural chemicals, crop-protection formulations, water conditioning, drilling and mining industries.
BASF Agnique PG 8105-G is an aqueous solution of C8-C10 alkyl polyglucosides based on natural, plant-origin fatty alcohol. It is a nonionic surfactant solution designed for industrial formulation systems where wetting, surface tension reduction, water compatibility and surfactant performance are required.
Agnique PG 8105-G is supplied as a yellow, viscous liquid and contains approximately 63% active matter with approximately 37% water content. Its alkyl polyglucoside chemistry, water solubility, high surface activity and plant-origin raw material base make it a useful surfactant option for selected agrochemical and industrial formulation concepts.
Ataman Kimya supplies BASF Agnique PG 8105-G to industrial customers and provides support for product documentation, samples, packaging, logistics, pricing, availability and application-specific discussions.
Contact Ataman Kimya to request:
Product Identification
|
Property |
Information |
|
Product name |
BASF Agnique PG 8105-G |
|
Product type |
Nonionic surfactant solution |
|
Chemical nature |
Aqueous solution of C8-C10 alkyl polyglucosides |
|
Raw material base |
Natural, plant-origin fatty alcohol C8-C10 |
|
Preservative content |
Free of preservatives |
|
BASF product number |
30530207 |
|
Product-specific CAS number |
Not assigned / not applicable for the mixture |
|
Product-specific EC number |
Not assigned / not applicable for the mixture |
|
Main surfactant component |
D-Glucopyranose, oligomers, decyl octyl glycosides |
|
Main surfactant CAS number |
68515-73-1 |
|
Main surfactant EC number |
500-220-1 |
|
Minor listed component in SDS |
Sodium hydroxide |
|
Sodium hydroxide CAS number |
1310-73-2 |
|
Sodium hydroxide EC number |
215-185-5 |
|
Physical form |
Yellow liquid |
|
Appearance in technical information |
Colourless to yellow, clear to cloudy and viscous liquid |
|
Odour |
Almost odourless |
|
Relevant use in BASF SDS |
Surfactants |
|
Recommended use in BASF SDS |
Cosmetic ingredient |
Important Note on CAS Number and EC Number
Agnique PG 8105-G is an aqueous surfactant mixture, not a single pure chemical substance.
For this reason, the product itself should be identified as a mixture, and a single product-specific CAS number or EC number should not be presented as if it belonged to the complete commercial product.
The main surfactant component listed in the BASF Safety Data Sheet is:
|
Component |
CAS Number |
EC Number |
|
D-Glucopyranose, oligomers, decyl octyl glycosides |
68515-73-1 |
500-220-1 |
The Safety Data Sheet also lists sodium hydroxide as a minor component:
|
Component |
CAS Number |
EC Number |
|
Sodium hydroxide |
1310-73-2 |
215-185-5 |
For purchasing, regulatory and safety purposes, customers should always refer to the latest BASF Safety Data Sheet, Technical Information document and Certificate of Analysis supplied with the product.
What Is Agnique PG 8105-G?
Agnique PG 8105-G is a BASF nonionic surfactant solution based on alkyl polyglucosides, also known as APG surfactants. Alkyl polyglucosides are widely used in industrial formulation systems because they combine surface activity, water compatibility and formulation versatility.
Agnique PG 8105-G is based on natural, plant-origin C8-C10 fatty alcohol and is supplied as an aqueous solution. It is free of preservatives and contains approximately 63% active matter.
In formulation systems, Agnique PG 8105-G can be evaluated where wetting, surface tension reduction, compatibility with water-based systems, foam formation and nonionic surfactant performance are required.
Alternative Names and Search Terms
Agnique PG 8105-G may also be searched or described as:
Key Benefits of BASF Agnique PG 8105-G
Nonionic Alkyl Polyglucoside Surfactant
Agnique PG 8105-G is a nonionic surfactant solution based on C8-C10 alkyl polyglucosides. Its nonionic character can make it suitable for a wide range of formulation concepts where compatibility with other formulation components is required.
Based on Plant-Origin Fatty Alcohol
The product is based on natural, plant-origin C8-C10 fatty alcohol and belongs to the alkyl polyglucoside surfactant family.
Approximately 63% Active Matter
Agnique PG 8105-G contains approximately 63% active matter and approximately 37% water, providing a ready-to-use aqueous surfactant solution for industrial formulation work.
Strong Surface Activity
BASF technical information reports a surface tension of approximately 30 mN/m at 1 g/L in distilled water at 23°C. This supports its use in systems where wetting and surface tension reduction are important.
Water Soluble and Water Compatible
Agnique PG 8105-G is soluble in water and miscible in distilled water in all proportions according to the BASF Safety Data Sheet. BASF technical information also describes its behaviour in distilled water, potable water, caustic soda solution and sodium chloride solution.
Useful Wetting Performance
BASF technical information provides wetting values at different concentrations, showing improved wetting performance as concentration increases.
Foam Formation
Agnique PG 8105-G can generate foam in water-based systems. BASF technical information reports foam formation of approximately 600 cm³ under the referenced test conditions.
Readily Biodegradable
According to the BASF Safety Data Sheet, Agnique PG 8105-G is readily biodegradable according to OECD criteria.
Not Classified as Dangerous Goods for Transport
According to the BASF Safety Data Sheet, Agnique PG 8105-G is not classified as dangerous goods under ADR, RID, ADN, IMDG or IATA/ICAO transport regulations.
Applications of Agnique PG 8105-G
Agnique PG 8105-G for Agrochemicals and Crop Protection
Agnique PG 8105-G can be evaluated as a nonionic surfactant in selected agricultural and crop-protection formulation systems.
Potential agrochemical applications include:
Agnique PG 8105-G may help support wetting, surface tension reduction, dispersion behaviour and formulation performance in selected agrochemical systems.
Each formulation should be tested for:
Agnique PG 8105-G for Water Treatment and Water Conditioning
Agnique PG 8105-G can be evaluated as a nonionic surfactant component in selected industrial water-treatment and water-conditioning formulations.
Potential evaluation areas include:
Agnique PG 8105-G is an industrial-quality product. It should not be considered automatically suitable for direct potable-water applications. Any use in water-treatment or water-conditioning systems must be evaluated according to the final formulation, dosage, process conditions and applicable regulatory requirements.
Agnique PG 8105-G for Drilling and Oilfield Applications
Agnique PG 8105-G can be evaluated as a nonionic surfactant in selected drilling, wellbore-treatment and oilfield chemical formulations.
Potential evaluation areas include:
Its nonionic surfactant character, water compatibility and surface tension reduction can be useful in certain formulation concepts. Suitability must be confirmed through testing under actual temperature, salinity, pressure, rheology and compatibility conditions.
Agnique PG 8105-G for Mining and Mineral Processing
Agnique PG 8105-G can be evaluated as a nonionic surfactant in selected mining, mineral-processing and extraction-related chemical systems.
Potential evaluation areas include:
Performance depends on the complete formulation, mineral system, pH, temperature, water hardness, electrolyte content, foam behaviour and process design. Laboratory and pilot-scale testing are recommended before industrial use.
Typical Technical Properties
|
Property |
Typical or Reported Value |
|
Appearance |
Colourless to yellow, clear to cloudy viscous liquid |
|
SDS colour |
Yellow |
|
Product type |
Nonionic surfactant solution |
|
Chemical nature |
Aqueous solution of C8-C10 alkyl polyglucosides |
|
BASF product number |
30530207 |
|
Product-specific CAS number |
Not assigned / not applicable for mixture |
|
Product-specific EC number |
Not assigned / not applicable for mixture |
|
Main surfactant CAS number |
68515-73-1 |
|
Main surfactant EC number |
500-220-1 |
|
Delivery form at 23°C |
Liquid |
|
Active matter |
Approximately 63% |
|
Water content |
Approximately 37% |
|
SDS water content basis |
Aqueous solution |
|
pH, 10% in water |
Approximately 12 |
|
SDS pH value |
11.5–12.5 in water at 20°C |
|
Density at 40°C |
Approximately 1.135 g/cm³ |
|
SDS density at 20°C |
1.13–1.14 g/cm³ |
|
Pour point |
Approximately −18°C |
|
Solidification temperature |
≤ 10°C |
|
Melting temperature |
< 0°C |
|
Boiling temperature |
> 100°C |
|
Flash point |
210°C |
|
Auto-ignition temperature |
> 300°C |
|
Dynamic viscosity at 40°C |
500–1,500 mPa·s |
|
Surface tension |
Approximately 30 mN/m |
|
SDS surface tension |
29 mN/m |
|
Solubility in water |
Soluble |
|
Vapour pressure at 20°C |
< 0.1 hPa |
|
Log Kow |
< 1.77 |
|
Shelf life |
At least 2 years in original packaging under proper conditions |
These values are provided for general guidance. The latest BASF specification, Safety Data Sheet and Certificate of Analysis should be used for purchasing, quality control, regulatory documentation and formulation approval.
Wetting and Foam Behaviour
BASF technical information reports the following wetting performance in distilled water at 23°C with 2 g soda/L:
|
Agnique PG 8105-G Concentration |
Wetting Time |
|
0.5 g/L |
> 300 s |
|
1.0 g/L |
Approximately 220 s |
|
2.0 g/L |
Approximately 80 s |
Foam formation under the referenced test conditions is approximately 600 cm³ after 30 seconds.
These values show that concentration, water composition and formulation conditions are important for evaluating wetting and foam behaviour.
Solubility and Formulation Behaviour
BASF technical information gives an overview of Agnique PG 8105-G solubility at 10% concentration and 23°C.
|
Medium / Solvent |
Behaviour |
|
Distilled water |
Opaque soluble homogeneous emulsion |
|
Potable water |
Opaque soluble homogeneous emulsion |
|
Caustic soda, 5% |
Opaque soluble homogeneous emulsion |
|
Hydrochloric acid, 5% |
Clear solution |
|
Sodium chloride solution, 5% |
Opaque soluble homogeneous emulsion |
|
Solvent naphtha |
Insoluble / phase separation |
|
Ethanol / Isopropanol |
Insoluble / phase separation |
|
Aromatic hydrocarbons |
Insoluble / phase separation |
According to the BASF Safety Data Sheet, Agnique PG 8105-G is soluble in water and miscible in distilled water in all proportions.
Final compatibility must always be tested in the complete formulation, especially in systems containing active ingredients, salts, fertilizers, water conditioners, oils, solvents, surfactants or other formulation additives.
Viscosity and Temperature Behaviour
The relationship between viscosity and temperature is an important point when Agnique PG 8105-G is stored, pumped or transported.
BASF technical information includes a viscosity-temperature chart showing that the product becomes significantly more viscous at low temperature and becomes easier to handle as temperature increases.
The BASF Safety Data Sheet states that the product should be protected from temperatures below 10°C because below this temperature limit the product is no longer pumpable. The product should also be protected from temperatures above 50°C, because properties may change irreversibly above the indicated limit.
BASF technical information also reports viscosity values after water addition at 23°C:
|
Water Addition |
Viscosity |
|
+10% |
700 mPa·s |
|
+20% |
200 mPa·s |
|
+30% |
120 mPa·s |
|
+40% |
50 mPa·s |
|
+50% |
20 mPa·s |
|
+60% |
<20 mPa·s |
|
+70% |
<20 mPa·s |
These values are useful for formulation and handling trials, but final processing behaviour should be validated under actual production conditions.
Storage and Handling
Agnique PG 8105-G should be stored and handled under good industrial hygiene and safety practice.
Recommended storage and handling conditions include:
If the product has solidified or shows signs of precipitation, BASF technical information recommends heating it to approximately 60°C and rehomogenizing it before processing. Drums should be reconstituted by gentle heating, preferably in a heating cabinet, and the temperature should not exceed 60°C. Internal electrical heating elements should not be used because they may cause local temperature irregularities.
If Agnique PG 8105-G is stored in heated tanks at approximately 40°C, nitrogen blanketing is recommended to prevent contact with air. Constant, gentle stirring can help prevent discoloration or damage during heated storage.
Suitable materials for containers, tanks and drums include:
Agnique PG 8105-G has a shelf life of at least 2 years in its original packaging when stored properly and when drums are kept tightly sealed.
Safety and Regulatory Information
According to the BASF Safety Data Sheet, Agnique PG 8105-G is classified under UN GHS criteria as:
Hazard statements:
Signal word:
Danger
Hazard-determining component for labelling:
Recommended safety precautions include:
According to the BASF Safety Data Sheet, Agnique PG 8105-G is not classified as dangerous goods under ADR, RID, ADN, IMDG or IATA/ICAO transport regulations.
Agnique PG 8105-G is readily biodegradable according to OECD criteria and does not contain substances fulfilling PBT or vPvB criteria under the referenced REACH assessment.
Why Choose Ataman Kimya for BASF Agnique PG 8105-G?
Ataman Kimya supports industrial customers seeking reliable supply of BASF Agnique PG 8105-G in Turkey and the surrounding region.
Customers benefit from:
Frequently Asked Questions
What is Agnique PG 8105-G?
Agnique PG 8105-G is a BASF aqueous nonionic surfactant solution based on C8-C10 alkyl polyglucosides. It is supplied as a viscous liquid and can be evaluated in selected agrochemical and industrial formulation systems.
What is the CAS number of Agnique PG 8105-G?
Agnique PG 8105-G is a mixture, so the commercial product does not have a single product-specific CAS number. The main surfactant component listed in the BASF Safety Data Sheet is D-Glucopyranose, oligomers, decyl octyl glycosides, with CAS number 68515-73-1.
What is the EC number of Agnique PG 8105-G?
Agnique PG 8105-G is a mixture, so the commercial product does not have a single product-specific EC number. The main surfactant component listed in the BASF Safety Data Sheet has EC number 500-220-1.
What is the BASF product number of Agnique PG 8105-G?
The BASF product number of Agnique PG 8105-G is 30530207.
What is the chemical nature of Agnique PG 8105-G?
BASF technical information describes Agnique PG 8105-G as an aqueous solution of alkyl polyglucosides based on natural, plant-origin fatty alcohol C8-C10 and free of preservatives.
What is Agnique PG 8105-G used for?
Agnique PG 8105-G is used as a surfactant in industrial formulation systems. It can be evaluated in agrochemical, water-conditioning, drilling and mining-related formulations where nonionic surfactant performance is required.
Can Agnique PG 8105-G be used in agrochemical formulations?
Yes. Agnique PG 8105-G can be evaluated as a nonionic surfactant in selected agrochemical and crop-protection formulation systems. Suitability must be confirmed with the final formulation, active ingredient and application conditions.
Is Agnique PG 8105-G soluble in water?
Yes. According to the BASF Safety Data Sheet, Agnique PG 8105-G is soluble in water and miscible in distilled water in all proportions.
What is the active matter content of Agnique PG 8105-G?
According to BASF technical information, Agnique PG 8105-G has approximately 63% active matter.
What is the water content of Agnique PG 8105-G?
According to BASF technical information, Agnique PG 8105-G has approximately 37% water content.
What is the pH of Agnique PG 8105-G?
BASF technical information reports a pH value of approximately 12 at 10% in water. The BASF Safety Data Sheet reports a pH range of 11.5–12.5 in water at 20°C.
What is the flash point of Agnique PG 8105-G?
According to the BASF Safety Data Sheet, the flash point of Agnique PG 8105-G is approximately 210°C.
How should Agnique PG 8105-G be stored?
Agnique PG 8105-G should be stored between 10°C and 40°C, in tightly closed and dry containers, in a cool place. It should be protected from temperatures below 10°C and above 50°C.
What is the shelf life of Agnique PG 8105-G?
Agnique PG 8105-G has a shelf life of at least 2 years in its original packaging when stored properly and when drums are kept tightly sealed.
Is Agnique PG 8105-G classified as hazardous under GHS?
Yes. According to the BASF Safety Data Sheet, Agnique PG 8105-G is classified as Eye Damage Category 1 and Aquatic Acute Category 3, with hazard statements H318 and H402.
Is Agnique PG 8105-G classified as dangerous goods for transport?
No. According to the BASF Safety Data Sheet, Agnique PG 8105-G is not classified as dangerous goods under ADR, RID, ADN, IMDG or IATA/ICAO transport regulations.
Is Agnique PG 8105-G biodegradable?
Yes. According to the BASF Safety Data Sheet, Agnique PG 8105-G is readily biodegradable according to OECD criteria.
Can Agnique PG 8105-G be used in water treatment applications?
Agnique PG 8105-G can be evaluated as a nonionic surfactant component in selected industrial water-treatment and water-conditioning formulations. Suitability must be confirmed according to the final formulation and regulatory requirements.
Can Agnique PG 8105-G be used in drilling applications?
Agnique PG 8105-G can be evaluated in selected drilling, wellbore-treatment and oilfield chemical formulations where water-compatible nonionic surfactant functionality is required.
Can Agnique PG 8105-G be used in mining applications?
Agnique PG 8105-G can be evaluated as a nonionic surfactant in selected mining and mineral-processing formulations. Laboratory and pilot-scale testing are recommended before industrial use.
Where can I buy BASF Agnique PG 8105-G in Turkey?
BASF Agnique PG 8105-G can be supplied by Ataman Kimya, BASF’s distributor for Turkey and the surrounding region for agricultural chemicals, water conditioning, drilling and mining industries.
Request a Quote for BASF Agnique PG 8105-G
Contact Ataman Kimya for current information regarding:
Product: BASF Agnique PG 8105-G
Chemical nature: Aqueous solution of C8-C10 alkyl polyglucosides
Product-specific CAS Number: Not assigned / not applicable for mixture
Product-specific EC Number: Not assigned / not applicable for mixture
Main surfactant CAS Number: 68515-73-1
Main surfactant EC Number: 500-220-1
BASF Product Number: 30530207
Contact Ataman Kimya to request a quotation for BASF Agnique PG 8105-G.
