BASF AGNIQUE PG 8102 SUPPLIER AND DISTRIBUTOR IN TURKEY
Ataman Kimya is BASF’s distributor for Agnique PG 8102 in Turkey and the surrounding region for agricultural chemicals, crop-protection formulations, water conditioning, drilling and mining industries.
BASF Agnique PG 8102 is a C8 alkyl polyglucoside and an aqueous alkylpolyglycoside surfactant. It is a clear yellowish to brownish liquid designed for formulation systems where surface activity, water compatibility, wetting support and nonionic surfactant performance are required.
Agnique PG 8102 contains approximately 62% active matter and approximately 38% water. It offers a moderate-foam profile compared with higher-foaming APG types, making it a useful candidate for selected agrochemical and industrial formulations where alkyl polyglucoside chemistry is needed but excessive foam may be undesirable.
Ataman Kimya supplies BASF Agnique PG 8102 to industrial customers and provides support for product documentation, samples, packaging, logistics, pricing, availability and application-specific discussions.
Contact Ataman Kimya to request:
Product Identification
|
Property |
Information |
|
Product name |
BASF Agnique PG 8102 |
|
Product type |
Nonionic surfactant / alkyl polyglucoside solution |
|
Chemical nature |
Aqueous alkylpolyglycoside |
|
Product description |
C8 alkyl polyglucoside |
|
BASF product number |
30773544 |
|
Product-specific CAS number |
Not assigned / not applicable for the mixture |
|
Product-specific EC number |
Not assigned / not applicable for the mixture |
|
SDS hazardous ingredient description |
Alkylpolyglycoside |
|
Component concentration in SDS |
≥50% - <75% |
|
Physical form |
Clear yellowish to brownish liquid |
|
Odour |
Product specific |
|
Relevant identified use in SDS |
Chemical for the chemical industry |
|
Main function |
Nonionic surfactant for agrochemical and industrial formulation systems |
Important Note on CAS Number and EC Number
Agnique PG 8102 is a mixture, not a single pure chemical substance.
For this reason, the complete commercial product should not be presented as having one single product-specific CAS number or EC number. The BASF Safety Data Sheet identifies the product as a blend based on surfactant and lists Alkylpolyglycoside as the hazardous ingredient, but it does not provide a single product-specific CAS number or EC number.
The correct product identification should therefore be presented as:
|
Identification item |
Status |
|
Product-specific CAS number |
Not assigned / not applicable for the mixture |
|
Product-specific EC number |
Not assigned / not applicable for the mixture |
|
BASF product number |
30773544 |
For regulatory, purchasing and safety documentation, customers should refer to the latest BASF Safety Data Sheet, Technical Information document, Certificate of Analysis and official component-level documentation supplied with the product.
What Is Agnique PG 8102?
Agnique PG 8102 is a BASF alkyl polyglucoside surfactant solution. Alkyl polyglucosides, also known as APG surfactants, are nonionic surfactants valued for their water compatibility, surface activity and formulation versatility.
Agnique PG 8102 is described in BASF technical information as a C8 alkyl polyglucoside and an aqueous alkylpolyglycoside. It is supplied as a clear yellowish to brownish liquid, with approximately 62% active matter.
In formulation systems, Agnique PG 8102 can be evaluated where wetting, surface tension reduction, water compatibility, moderate foam behaviour and nonionic surfactant performance are needed.
Alternative Names and Search Terms
Agnique PG 8102 may also be searched or described as:
Key Benefits of BASF Agnique PG 8102
C8 Alkyl Polyglucoside Surfactant
Agnique PG 8102 is a C8 alkyl polyglucoside and aqueous alkylpolyglycoside surfactant. It can be evaluated in systems requiring nonionic surfactant functionality and compatibility with aqueous formulations.
Approximately 62% Active Matter
Agnique PG 8102 contains approximately 62% active matter and approximately 38% water, providing a ready-to-use aqueous APG surfactant solution.
Clear Yellowish to Brownish Liquid
BASF technical information describes Agnique PG 8102 as a clear yellowish to brownish liquid, suitable for industrial formulation handling under recommended storage and processing conditions.
Water Soluble
Agnique PG 8102 is soluble in water. BASF technical information reports clear solution behaviour in distilled water, tap water, aqueous sodium hydroxide, hydrochloric acid and sodium chloride solution under the referenced test conditions.
Moderate Foam Behaviour
Agnique PG 8102 has a significantly lower foam profile than some higher-foaming APG surfactants. BASF technical information reports an approximate foaming volume of 30 ml under the referenced test conditions.
Surface Tension Reduction
Agnique PG 8102 can reduce surface tension in aqueous systems. BASF technical information reports surface tension values of approximately 33 mN/m at 1 g/L and approximately 29 mN/m at 0.5% in distilled water at 23°C.
Useful for Water-Based Formulation Concepts
Its aqueous alkylpolyglycoside chemistry, water compatibility and nonionic surfactant profile make Agnique PG 8102 suitable for evaluation in selected water-based agrochemical, industrial and process formulations.
Readily Biodegradable
According to the BASF Safety Data Sheet, Agnique PG 8102 is readily biodegradable.
Not Classified as Dangerous Goods for Transport
According to the BASF Safety Data Sheet, Agnique PG 8102 is not classified as dangerous goods under ADR, RID, ADN, IMDG or IATA/ICAO transport regulations.
Applications of Agnique PG 8102
Agnique PG 8102 for Agrochemicals and Crop Protection
Agnique PG 8102 can be evaluated as a nonionic surfactant in selected agricultural and crop-protection formulation systems.
Potential agrochemical applications include:
Agnique PG 8102 may support wetting, aqueous compatibility, surface tension reduction and formulation performance in selected agrochemical systems.
Each formulation should be tested for:
Agnique PG 8102 for Water Treatment and Water Conditioning
Agnique PG 8102 can be evaluated as a nonionic surfactant component in selected industrial water-treatment and water-conditioning formulations.
Potential evaluation areas include:
Agnique PG 8102 is an industrial-quality product. It should not be considered automatically suitable for direct potable-water applications. Any use in water-treatment or water-conditioning systems must be evaluated according to the final formulation, dosage, process conditions and applicable regulatory requirements.
Agnique PG 8102 for Drilling and Oilfield Applications
Agnique PG 8102 can be evaluated as a nonionic surfactant in selected drilling, wellbore-treatment and oilfield chemical formulations.
Potential evaluation areas include:
Its nonionic surfactant character, water compatibility and surface activity can be useful in certain formulation concepts. Suitability must be confirmed through testing under actual temperature, salinity, pressure, rheology and compatibility conditions.
Agnique PG 8102 for Mining and Mineral Processing
Agnique PG 8102 can be evaluated as a nonionic surfactant in selected mining, mineral-processing and extraction-related chemical systems.
Potential evaluation areas include:
Performance depends on the complete formulation, mineral system, pH, temperature, water hardness, electrolyte content, foam behaviour and process design. Laboratory and pilot-scale testing are recommended before industrial use.
Typical Technical Properties
|
Property |
Typical or Reported Value |
|
Appearance |
Clear yellowish to brownish liquid |
|
Product type |
Nonionic surfactant solution |
|
Chemical nature |
Aqueous alkylpolyglycoside |
|
BASF product number |
30773544 |
|
Product-specific CAS number |
Not assigned / not applicable for mixture |
|
Product-specific EC number |
Not assigned / not applicable for mixture |
|
Physical form at 23°C |
Clear yellowish to brownish liquid |
|
Active matter |
Approximately 62% |
|
Water content |
Approximately 38% |
|
pH value |
Approximately 7.5 |
|
SDS pH value |
6–9 |
|
Density at 20°C |
Approximately 1.163 g/cm³ |
|
Density at 23°C |
Approximately 1.161 g/cm³ |
|
Density at 25°C |
Approximately 1.160 g/cm³ |
|
Density at 40°C |
Approximately 1.150 g/cm³ |
|
Density at 50°C |
Approximately 1.143 g/cm³ |
|
Density at 60°C |
Approximately 1.136 g/cm³ |
|
Free alcohol |
Maximum 1.0% |
|
Ash content |
Maximum 1.0% |
|
Congealing point |
< 5°C |
|
Foaming volume |
Approximately 30 ml |
|
Surface tension at 1 g/L |
Approximately 33 mN/m |
|
Surface tension at 0.5% |
Approximately 29 mN/m |
|
CMC |
Approximately 450 mg/L |
|
Solubility in water |
Soluble, clear |
|
Dynamic viscosity at 23°C |
Approximately 360 mPa·s |
|
Dynamic viscosity at 40°C |
Approximately 130 mPa·s |
|
Dynamic viscosity at 50°C |
Approximately 75 mPa·s |
|
Dynamic viscosity at 60°C |
Approximately 50 mPa·s |
|
Shelf life |
At least 24 months in original packaging under proper conditions |
These values are provided for general guidance. The latest BASF specification, Safety Data Sheet and Certificate of Analysis should be used for purchasing, quality control, regulatory documentation and formulation approval.
Wetting and Foam Behaviour
According to BASF technical information, Agnique PG 8102 shows the following wetting performance in distilled water at 23°C with 2 g soda/L:
|
Agnique PG 8102 Concentration |
Wetting Time |
|
0.5 g/L |
> 300 s |
|
1.0 g/L |
> 300 s |
|
2.0 g/L |
> 300 s |
Under the referenced foam test conditions, the foaming volume is approximately 30 ml. This makes Agnique PG 8102 relevant for systems where an APG surfactant is required but lower foam generation is desirable.
Solubility and Formulation Behaviour
BASF technical information reports the following solubility behaviour at 10% concentration and 23°C:
|
Medium / Solvent |
Behaviour |
|
Distilled water |
Clear solution |
|
Tap water |
Clear solution |
|
Sodium hydroxide solution, 5% |
Clear solution |
|
Hydrochloric acid solution, 5% |
Clear solution |
|
Sodium chloride solution, 5% |
Clear solution |
|
White spirit |
Insoluble |
|
Mineral oil |
Insoluble |
|
Ethanol |
Insoluble |
|
Isopropanol |
Insoluble |
|
Xylol |
Insoluble |
Final compatibility must always be tested in the complete formulation, especially in systems containing active ingredients, salts, fertilizers, water conditioners, oils, solvents, surfactants or other formulation additives.
Viscosity and Temperature Behaviour
The relationship between viscosity and temperature is important when Agnique PG 8102 is stored, pumped or transported. The product becomes easier to handle as temperature increases.
BASF technical information reports the following viscosity values:
|
Temperature |
Viscosity |
|
23°C |
Approximately 360 mPa·s |
|
40°C |
Approximately 130 mPa·s |
|
50°C |
Approximately 75 mPa·s |
|
60°C |
Approximately 50 mPa·s |
These values are useful for formulation and handling trials, but final processing behaviour should be validated under actual production conditions.
Storage and Handling
Agnique PG 8102 should be stored and handled under good industrial hygiene and safety practice.
Recommended storage and handling conditions include:
Suitable materials for storage include:
Recommended feed pumps include:
Agnique PG 8102 has a shelf life of at least 24 months in its original packaging when stored properly and when drums are kept tightly sealed.
Safety and Regulatory Information
According to the BASF Safety Data Sheet, Agnique PG 8102 is classified under UN GHS criteria as:
Hazard statements:
Signal word:
Danger
Recommended safety precautions include:
According to the BASF Safety Data Sheet, Agnique PG 8102 is not classified as dangerous goods under ADR, RID, ADN, IMDG or IATA/ICAO transport regulations.
Agnique PG 8102 is readily biodegradable and does not fulfill the criteria for PBT or vPvB under the referenced REACH assessment.
Why Choose Ataman Kimya for BASF Agnique PG 8102?
Ataman Kimya supports industrial customers seeking reliable supply of BASF Agnique PG 8102 in Turkey and the surrounding region.
Customers benefit from:
Frequently Asked Questions
What is Agnique PG 8102?
Agnique PG 8102 is a BASF C8 alkyl polyglucoside and aqueous alkylpolyglycoside surfactant solution. It is supplied as a clear yellowish to brownish liquid and can be evaluated in selected agrochemical and industrial formulation systems.
What is the CAS number of Agnique PG 8102?
Agnique PG 8102 is a mixture, so the commercial product does not have a single product-specific CAS number. The BASF Safety Data Sheet lists the hazardous ingredient as Alkylpolyglycoside, but does not provide a single product-specific CAS number.
What is the EC number of Agnique PG 8102?
Agnique PG 8102 is a mixture, so the commercial product does not have a single product-specific EC number. The EC number should therefore be stated as not assigned / not applicable for the mixture unless a component-specific EC number is provided in official BASF documentation.
What is the BASF product number of Agnique PG 8102?
The BASF product number of Agnique PG 8102 is 30773544.
What is the chemical nature of Agnique PG 8102?
BASF technical information describes Agnique PG 8102 as an aqueous alkylpolyglycoside and a C8 alkyl polyglucoside.
What is Agnique PG 8102 used for?
Agnique PG 8102 is used as a surfactant in industrial formulation systems. It can be evaluated in agrochemical, water-conditioning, drilling and mining-related formulations where nonionic surfactant performance is required.
Can Agnique PG 8102 be used in agrochemical formulations?
Yes. Agnique PG 8102 can be evaluated as a nonionic surfactant in selected crop-protection and agrochemical formulation systems. Suitability must be confirmed with the final formulation, active ingredient and application conditions.
Is Agnique PG 8102 soluble in water?
Yes. BASF technical information reports clear solution behaviour in distilled water, tap water, sodium hydroxide solution, hydrochloric acid solution and sodium chloride solution under the referenced test conditions.
What is the active matter content of Agnique PG 8102?
According to BASF technical information, Agnique PG 8102 has approximately 62% active matter.
What is the water content of Agnique PG 8102?
According to BASF technical information, Agnique PG 8102 has approximately 38% water content.
What is the pH of Agnique PG 8102?
BASF technical information reports a pH value of approximately 7.5. The BASF Safety Data Sheet reports a pH range of 6–9.
How should Agnique PG 8102 be stored?
Agnique PG 8102 should be stored in tightly closed containers in a cool place. Storage temperature should not exceed 40°C. Product that has solidified or shows sedimentation should be heated and homogenized before processing according to BASF handling guidance.
What is the shelf life of Agnique PG 8102?
Agnique PG 8102 has a shelf life of at least 24 months in its original packaging when stored properly and when drums are kept tightly sealed.
Is Agnique PG 8102 classified as hazardous under GHS?
Yes. According to the BASF Safety Data Sheet, Agnique PG 8102 is classified as Eye Damage Category 1 and Aquatic Acute Category 3, with hazard statements H318 and H402.
Is Agnique PG 8102 classified as dangerous goods for transport?
No. According to the BASF Safety Data Sheet, Agnique PG 8102 is not classified as dangerous goods under ADR, RID, ADN, IMDG or IATA/ICAO transport regulations.
Is Agnique PG 8102 biodegradable?
Yes. According to the BASF Safety Data Sheet, Agnique PG 8102 is readily biodegradable.
Can Agnique PG 8102 be used in water treatment applications?
Agnique PG 8102 can be evaluated as a nonionic surfactant component in selected industrial water-treatment and water-conditioning formulations. Suitability must be confirmed according to the final formulation and regulatory requirements.
Can Agnique PG 8102 be used in drilling applications?
Agnique PG 8102 can be evaluated in selected drilling, wellbore-treatment and oilfield chemical formulations where water-compatible nonionic surfactant functionality is required.
Can Agnique PG 8102 be used in mining applications?
Agnique PG 8102 can be evaluated as a nonionic surfactant in selected mining and mineral-processing formulations. Laboratory and pilot-scale testing are recommended before industrial use.
Where can I buy BASF Agnique PG 8102 in Turkey?
BASF Agnique PG 8102 can be supplied by Ataman Kimya, BASF’s distributor for Turkey and the surrounding region for agricultural chemicals, water conditioning, drilling and mining industries.
Request a Quote for BASF Agnique PG 8102
Contact Ataman Kimya for current information regarding:
Product: BASF Agnique PG 8102
Chemical nature: C8 alkyl polyglucoside / aqueous alkylpolyglycoside
Product-specific CAS Number: Not assigned / not applicable for mixture
Product-specific EC Number: Not assigned / not applicable for mixture
BASF Product Number: 30773544
Contact Ataman Kimya to request a quotation for BASF Agnique PG 8102.
