AGNIQUE PG 8107-G is a high-active C8–C10 alkyl polyglucoside surfactant designed to improve wetting, dispersion, and compatibility in agrochemical formulations.

AGNIQUE PG 8107-G's concentrated liquid form makes it useful for systems that need strong surface activity without adding unnecessary water to the formulation.

AGNIQUE PG 8107-G is especially valuable when stable mixing, plant-surface spreading, and APG-based surfactant performance are required together.

CAS Number: 68515-73-1

EC Number: 500-220-1

Synonyms: C8–C10 Alkyl Polyglucoside, C8–C10 Alkyl Polyglycoside, Alkyl Polyglucoside, Alkyl Polyglycoside, APG Surfactant, C8–C10 APG, Caprylyl/Capryl Glucoside, Decyl Octyl Glycosides, Nonionic APG Surfactant, Sugar-Based Surfactant, Plant-Based Surfactant, Bio-Based Nonionic Surfactant, Agrochemical Wetting Agent, Agricultural Surfactant, APG Compatibilizer

AGNIQUE PG 8107-G is a non-ionic surfactant based on renewable C8–C10 alkyl polyglucosides (APG), supplied as a ~70% active aqueous solution.

AGNIQUE PG 8107-G contains over 95% bio-based carbon, and it is readily biodegradable and preservative-free.

With excellent wetting and compatibilizing properties, AGNIQUE PG 8107-G enhances the performance of crop protection products—especially glyphosate formulations.

AGNIQUE PG 8107-G is listed on the TSCA Inventory, REACH-registered, and approved under EPA 40 CFR §180.910 inert ingredients used pre- and post-harvest.

AGNIQUE PG 8107-G is a nonionic C8–C10 alkyl polyglucoside surfactant supplied as a liquid with approximately 70% active content.

AGNIQUE PG 8107-G belongs to the APG surfactant group and is used mainly in agrochemical formulations as a wetting agent, dispersing aid, potentiator, and compatibilizer.

Compared with lower-active APG grades, AGNIQUE PG 8107-G provides stronger surfactant concentration while still remaining suitable for water-based agricultural systems.

AGNIQUE PG 8107-G is especially useful when a formulation needs surface spreading, salt compatibility, and stable mixing behavior in concentrated liquid systems.

Applications of AGNIQUE PG 8107-G:

AGNIQUE PG 8107-G is used in agrochemical formulations such as herbicides, pesticides, adjuvants, and water-based crop protection systems.

AGNIQUE PG 8107-G helps improve wetting on plant surfaces, dispersion of formulation components, and compatibility in salt- or electrolyte-containing systems.

AGNIQUE PG 8107-G is also suitable for formulations where APG-based, bio-derived, and readily biodegradable surfactant chemistry is preferred.

Properties of AGNIQUE PG 8107-G:

AGNIQUE PG 8107-G is a brownish, clear and viscous liquid at room temperature and tends to form sediment in cold.

Stability and Reactivity of AGNIQUE PG 8107-G:

Chemical stability:

AGNIQUE PG 8107-G is expected to be stable under recommended storage and handling conditions.

Reactivity:

No hazardous reaction is expected under normal industrial use.

Conditions to avoid:

Excessive heat, prolonged air exposure in heated tanks, freezing or solidification without rehomogenization, and unsuitable storage conditions should be avoided.

Incompatible materials:

Strong oxidizing agents, strong acids, and highly reactive chemicals should be avoided.

Hazardous decomposition products:

Thermal decomposition or fire may produce carbon oxides and irritating fumes.

Handling and Storage of AGNIQUE PG 8107-G:

Handling:

AGNIQUE PG 8107-G should be handled according to good industrial hygiene and chemical safety practices.

Storage temperature:

Storage temperature should not exceed 40 °C.

Rehomogenization:

If the product solidifies or shows sedimentation, AGNIQUE PG 8107-G should be gently heated up to maximum 60 °C and mixed before use.

Heated storage:

Nitrogen blanketing is recommended if the product is stored in heated tanks around 40 °C.

Shelf life:

At least two years when stored properly in tightly sealed original packaging.

First Aid Measures of AGNIQUE PG 8107-G:

Inhalation:

Move the person to fresh air.

Skin contact:

Wash affected skin with water and mild soap.

Eye contact:

Rinse carefully with plenty of water for several minutes.

Ingestion:

Rinse mouth with water and seek medical advice if discomfort occurs.

Firefighting Measures of AGNIQUE PG 8107-G:

Suitable extinguishing media:

Water spray, foam, dry chemical powder, or carbon dioxide may be used.

Fire hazards:

Heating or fire may generate irritating fumes.

Protective equipment:

Firefighters should wear protective clothing and self-contained breathing apparatus.

Accidental Release Measures of AGNIQUE PG 8107-G:

Personal precautions:

Avoid contact with eyes, skin, and clothing.

Environmental precautions:

Prevent large amounts from entering drains, soil, or surface waters.

Cleanup method:

Absorb with inert material such as sand or universal absorbent.

Disposal:

Dispose of collected material according to local regulations.

Exposure Controls / Personal Protection of AGNIQUE PG 8107-G:

Engineering controls:

Use adequate ventilation.

Eye protection:

Safety glasses or chemical goggles are recommended.

Hand protection:

Chemical-resistant gloves are recommended.

Skin protection:

Suitable protective work clothing is recommended.

Respiratory protection:

Use respiratory protection if mist, vapor, or aerosol exposure may occur.

Identifiers of AGNIQUE PG 8107-G:

Chemical type: C8–C10 alkyl polyglucoside

Surfactant type: Nonionic surfactant

CAS number: 68515-73-1

EC number: 500-220-1

Product Number (PRD): 30534072

Product CAS Details: 68515-73-1

Properties of AGNIQUE PG 8107-G:

Appearance: Dark brown liquid

Physical form at 23 °C: Liquid

Active matter: Approximately 70%

Water content: Approximately 30%

pH value: Approximately 8

Density at 20 °C: Approximately 1.161 g/cm³

Pour point: Approximately -13 °C

Surface tension: Approximately 29 mN/m

Foam formation: Approximately 650 cm³

Viscosity: Approximately 3500 mPa·s, depending on temperature and test conditions.