AGNIQUE DFM 111 S provides effective foam suppression in liquid agrochemical systems, helping formulations remain easier to process and handle.

AGNIQUE DFM 111 S minimizes excessive foaming during mixing and dilution, which supports cleaner production and smoother tank preparation.

AGNIQUE DFM 111 S is useful for crop protection formulations that need reliable foam control without disturbing overall formulation performance.

Synonyms: Silicone-based defoamer, Defoaming agent, Foam control agent, Antifoam agent, Agrochemical defoamer, Crop protection defoamer, Liquid defoamer, Silicone antifoam, Organopolysiloxane defoamer, Modified organopolysiloxane blend, Hydrocarbon-based defoamer, Foam suppressant, Processing defoamer, Tank-mix foam control agent, Formulation foam control additive

AGNIQUE DFM 111 S is a silicone-based defoamer used in agrochemical formulations to reduce and control foam during production, mixing, dilution, and spray preparation.

AGNIQUE DFM 111 S is an aqueous solution based on hydrocarbons and modified organopolysiloxanes, giving it effective foam-suppression performance in liquid crop protection systems.

AGNIQUE DFM 111 S is especially useful in formulations where excessive foam can disturb filling, handling, tank mixing, or application consistency.

AGNIQUE DFM 111 S helps improve processing efficiency, product appearance, and formulation stability by preventing unwanted foam formation.

Uses of AGNIQUE DFM 111 S:

AGNIQUE DFM 111 S is used as a defoamer in agrochemical formulations.

AGNIQUE DFM 111 S is used to reduce foam during formulation production and processing.

AGNIQUE DFM 111 S is used to control foam during dilution and tank mixing.

AGNIQUE DFM 111 S is used in liquid crop protection products where excessive foam may affect filling, handling, or application.

AGNIQUE DFM 111 S is used to improve processing efficiency by preventing unwanted foam build-up.

AGNIQUE DFM 111 S is used to support smoother spray preparation and more consistent application behavior.

AGNIQUE DFM 111 S is used in pesticide, herbicide, fungicide, and insecticide formulations that require foam control.

AGNIQUE DFM 111 S is used to improve product appearance and formulation handling by minimizing air entrapment and surface foam.

Stability and Reactivity of AGNIQUE DFM 111 S:

Chemical stability:

AGNIQUE DFM 111 S is stable under recommended storage and handling conditions.

Reactivity:

No hazardous reactions are expected under normal use conditions.

Possibility of hazardous reactions:

Dangerous reactions are not expected when handled properly.

Conditions to avoid:

Excessive heat, open flames, sparks, freezing conditions, and overheated storage areas should be avoided.

Incompatible materials:

Strong oxidizing agents should be avoided.

Hazardous decomposition products:

Thermal decomposition or combustion may produce carbon oxides, silicon oxides, and irritating fumes.

Handling and Storage of AGNIQUE DFM 111 S:

Handling:

AGNIQUE DFM 111 S should be handled according to good industrial hygiene and safety practices.

Safe handling:

Avoid contact with skin, eyes, and clothing.

Hygiene measures:

Wash hands thoroughly after handling.

Storage:

Store in tightly closed containers in a dry, cool, and well-ventilated area.

Storage conditions:

Keep away from heat, direct sunlight, frost, and incompatible materials.

Container requirements:

Keep containers sealed when not in use to prevent contamination.

Processing note:

Mix or homogenize before use if separation occurs during storage.

First Aid Measures of AGNIQUE DFM 111 S:

General advice:

Remove contaminated clothing and seek medical attention if symptoms occur.

Inhalation:

Move the person to fresh air and keep them comfortable.

Skin contact:

Wash skin thoroughly with soap and water.

Eye contact:

Rinse carefully with water for several minutes.

Ingestion:

Rinse mouth with water and seek medical advice if discomfort continues.

Medical advice:

Treat symptomatically.

Firefighting Measures of AGNIQUE DFM 111 S:

Suitable extinguishing media:

Use water spray, foam, dry chemical powder, or carbon dioxide.

Unsuitable extinguishing media:

Avoid using a strong direct water jet if it may spread the material.

Specific fire hazards:

Fire may produce carbon oxides, silicon oxides, and irritating decomposition products.

Protective equipment for firefighters:

Wear self-contained breathing apparatus and full protective clothing.

Further information:

Cool exposed containers with water spray if it can be done safely.

Accidental Release Measures of AGNIQUE DFM 111 S:

Personal precautions:

Avoid contact with skin, eyes, and clothing.

Protective equipment:

Use suitable gloves, protective clothing, and eye protection.

Environmental precautions:

Prevent release into drains, soil, surface water, or groundwater.

Containment method:

Stop the leak if it can be done safely.

Cleaning method:

Absorb with inert material such as sand, earth, or universal binder.

Disposal:

Collect in suitable labeled containers for proper disposal.

Exposure Controls / Personal Protection of AGNIQUE DFM 111 S:

Engineering controls:

Use adequate workplace ventilation.

Eye protection:

Wear safety glasses or chemical goggles.

Hand protection:

Wear chemical-resistant protective gloves.

Skin protection:

Wear suitable protective clothing.

Respiratory protection:

Use respiratory protection if ventilation is insufficient or aerosol exposure may occur.

General hygiene measures:

Do not eat, drink, or smoke while handling the product.

Personal hygiene:

Wash hands and exposed skin after use.

Identifiers of AGNIQUE DFM 111 S:

Product number: 30535624

Physical nature: Mixture

Properties of AGNIQUE DFM 111 S:

Physical form: White liquid

Active content: Approximately 100%

Viscosity: Approximately 1,500–2,500 mPa·s

Density: Approximately 0.97 g/cm³

Flash point: Above 100 °C