AGNIQUE CSO 40 & 20
AGNIQUE CSO 40 & 20 are castor oil ethoxylates used as nonionic emulsifiers to improve stability and dispersion in agrochemical formulations.
AGNIQUE CSO 20 provides stronger oil compatibility, while AGNIQUE CSO 40 offers higher water dispersibility and a more hydrophilic emulsification profile.
AGNIQUE CSO 40 & 20 help create stable crop protection formulations by supporting emulsification, wetting, and uniform active ingredient distribution.
CAS Number: 61791-12-6
Synonyms: Castor oil ethoxylate, Ethoxylated castor oil, Polyethoxylated castor oil, PEG castor oil, Nonionic castor oil surfactant, Castor oil emulsifier, Agrochemical emulsifier, Crop protection surfactant
AGNIQUE CSO 40 & 20 are castor oil ethoxylates used as nonionic emulsifiers in agrochemical formulations.
AGNIQUE CSO 20 contains approximately 20 EO units, while AGNIQUE CSO 40 contains approximately 40 EO units, giving them different emulsification strength, solubility, and HLB behavior.
AGNIQUE CSO 40 & 20 are mainly used to emulsify hydrophobic oils and support formulation stability in EC, EW, SE, and OD systems.
AGNIQUE CSO 40 & 20 also provide wetting and adjuvancy properties, making them useful in crop protection formulations where oil compatibility, emulsification, and spray performance are important.
Applications of AGNIQUE CSO 40 & 20:
AGNIQUE CSO 40 & 20 are biodegradable and derived from natural sources.
Typically, AGNIQUE CSO 40 & 20 are used as non-ionic emulsifiers often matched with anionic counterparts such as CaDDBS to give optimum stability in formulations such as EC, EW, SE, and OD. In addition, AGNIQUE CSO products show wetting and adjuvancy properties.
AGNIQUE CSO 40 & 20 are used as nonionic emulsifiers in agrochemical formulations.
AGNIQUE CSO 40 & 20 are used in emulsifiable concentrate formulations to help oil-based active ingredients disperse in water.
AGNIQUE CSO 40 & 20 are used in oil-in-water emulsions to improve emulsion stability and droplet distribution.
AGNIQUE CSO 40 & 20 are used in suspo-emulsion systems where both solid and liquid active ingredients must remain uniformly dispersed.
AGNIQUE CSO 40 & 20 are used in oil dispersion formulations to support compatibility between oils, surfactants, and active ingredients.
AGNIQUE CSO 40 & 20 are used to improve wetting and spreading performance during agricultural spray application.
AGNIQUE CSO 40 & 20 are used to enhance formulation stability by reducing phase separation in liquid crop protection products.
AGNIQUE CSO 40 & 20 are used in pesticide, herbicide, fungicide, and insecticide formulations that require reliable emulsification support.
AGNIQUE CSO 40 & 20 are generally preferred when stronger oil compatibility and lower ethoxylation behavior are needed.
AGNIQUE CSO 40 & 20 are generally preferred when higher water dispersibility and stronger hydrophilic emulsification behavior are needed.
Stability and Reactivity of AGNIQUE CSO 40 & 20:
Chemical stability:
AGNIQUE CSO 40 & 20 are stable under recommended storage and handling conditions.
Reactivity:
No hazardous reactions are expected under normal use conditions.
Possibility of hazardous reactions:
Hazardous polymerization or dangerous reactions are not expected when handled properly.
Conditions to avoid:
Excessive heat, open flames, sparks, moisture, and overheated storage areas should be avoided.
Incompatible materials:
Strong oxidizing agents should be avoided.
Hazardous decomposition products:
Thermal decomposition or combustion may produce carbon oxides and irritating fumes.
Handling and Storage of AGNIQUE CSO 40 & 20:
Handling:
AGNIQUE CSO 40 & 20 should be handled according to good industrial hygiene and safety practices.
Safe handling:
Avoid contact with skin, eyes, and clothing.
Hygiene measures:
Wash hands thoroughly after handling and before breaks.
Storage:
Store indoors in a dry, cool, and well-ventilated area.
Storage conditions:
Keep containers tightly closed because the products may absorb moisture quickly.
Container requirements:
Reseal drums after opening and use chemically compatible containers.
Special storage note:
If separation or solidification occurs, the product may be gently heated and homogenized before use.
First Aid Measures of AGNIQUE CSO 40 & 20:
General advice:
Remove contaminated clothing and seek medical attention if symptoms occur.
Inhalation:
Move the affected person to fresh air and keep them at rest.
Skin contact:
Wash the affected skin thoroughly with soap and water.
Eye contact:
Rinse carefully with water for several minutes.
Ingestion:
Rinse mouth with water.
Medical advice:
Seek medical attention if irritation, discomfort, or other symptoms continue.
Firefighting Measures of AGNIQUE CSO 40 & 20:
Suitable extinguishing media:
Use water spray, foam, dry chemical powder, or carbon dioxide.
Unsuitable extinguishing media:
Do not use a strong direct water jet if it may spread the material.
Specific fire hazards:
Combustion may produce carbon oxides and irritating decomposition products.
Protective equipment for firefighters:
Firefighters should wear self-contained breathing apparatus and full protective clothing.
Further information:
Cool exposed containers with water spray if it can be done safely.
Accidental Release Measures of AGNIQUE CSO 40 & 20:
Personal precautions:
Avoid contact with skin, eyes, and clothing.
Protective equipment:
Use suitable gloves, protective clothing, and eye protection.
Environmental precautions:
Prevent the product from entering drains, soil, surface water, or groundwater.
Containment method:
Stop the leak if it can be done safely.
Cleaning method:
Absorb with inert material such as sand, earth, or universal binder.
Disposal:
Collect the material in suitable labeled containers for proper disposal.
Exposure Controls / Personal Protection of AGNIQUE CSO 40 & 20:
Engineering controls:
Use adequate ventilation in the working area.
Eye protection:
Wear safety glasses or chemical goggles.
Hand protection:
Wear chemical-resistant protective gloves.
Skin protection:
Wear suitable protective clothing to prevent repeated or prolonged contact.
Respiratory protection:
Use respiratory protection if ventilation is insufficient or mist exposure may occur.
General hygiene measures:
Do not eat, drink, or smoke while handling the product.
Personal hygiene:
Wash hands and exposed skin after use.
Identifiers of AGNIQUE CSO 40 & 20:
Chemical description: Castor oil ethoxylate
CAS number: 61791-12-6
EC number: Not clearly specified for the commercial blend.
Product Number (PRD): 30531617
Product CAS Details: 61791-12-6
Properties of AGNIQUE CSO 40 & 20:
Chemical type: Castor oil ethoxylate
Product type: Nonionic emulsifier / agrochemical surfactant
Physical form: CSO 20 is a yellowish liquid; CSO 40 is a pasty liquid.
Active content: Approximately 100%
Density: CSO 20 is approx. 1.03 g/cm³; CSO 40 is approx. 1.06 g/cm³.
Viscosity: CSO 20 is approx. 110 mPa·s; CSO 40 is approx. 120 mPa·s.
pH value: Approximately 7
Cloud point: CSO 20 is approx. 66 °C; CSO 40 is approx. 74 °C.
Flash point: Approximately 290 °C
HLB value: CSO 20 is approx. 10.0; CSO 40 is approx. 13.1.
Water solubility: CSO 20 forms an opaque emulsion; CSO 40 forms a clear solution.
