AGNIQUE AMD 10 is a liquid C10 N,N-dimethyl amide solvent designed for agrochemical formulations that require strong solvency and low-viscosity performance.

AGNIQUE AMD 10 helps dissolve poorly water-soluble active ingredients and supports stable emulsifiable concentrate systems.

AGNIQUE AMD 10 provides a hydrophobic, low-volatility solvent medium suitable for pesticide, fungicide, herbicide, and other crop protection formulations.

CAS Number: 14433-76-2

EC Number: 238-405-1

Molecular Formula: C12H25NO

Molecular Mass: 199.33–199.34 g/mol

Synonyms: AGNIQUE AMD 10 solvent, N,N-Dimethyldecanamide, N,N-Dimethyldecan-1-amide, Decanamide, N,N-dimethyl-, N,N-Dimethyl decanamide, N,N-Dimethyl capramide, Capric acid dimethylamide, Decanoic acid dimethylamide, Decanoic acid N,N-dimethylamide, N,N-Dimethyl capric acid amide, C10 N,N-dimethyl amide, C10 fatty acid dimethylamide, Dimethylamide of decanoic acid, Dimethylamide of capric acid, Fatty acid dimethylamide solvent

AGNIQUE AMD 10 is a liquid C10 N,N-dimethyl amide solvent used in agrochemical and industrial formulation systems.

AGNIQUE AMD 10 is based on N,N-dimethyldecanamide and is mainly valued for its strong solvency performance, low viscosity, and hydrophobic character.

AGNIQUE AMD 10 can be used as a solvent or co-solvent in formulations where active ingredients require efficient dissolution, stable dispersion, and good compatibility with oil-based or low-water-solubility systems.

AGNIQUE AMD 10 with CAS Number 14433-76-2 and describes its chemical nature as C10 N,N-dimethyl amide.

Uses of AGNIQUE AMD 10:

AGNIQUE AMD 10 is used as a solvent and co-solvent in agrochemical formulations.

AGNIQUE AMD 10 is especially suitable for emulsifiable concentrate formulations.

AGNIQUE AMD 10 is used in pesticide, fungicide, and herbicide formulation systems.

AGNIQUE AMD 10 helps dissolve poorly water-soluble active ingredients.

AGNIQUE AMD 10 supports stable oil-based and water-insoluble solvent systems.

AGNIQUE AMD 10 can be used in EC and EW formulations for active ingredients such as tebuconazole, prothioconazole, difenoconazole, propiconazole, cyproconazole, and epoxiconazole combinations.

AGNIQUE AMD 10 is used where low viscosity, good solvency, and hydrophobic solvent behavior are required.

AGNIQUE AMD 10 can act as an alternative solvent in agricultural and industrial formulation systems.

Benefits of AGNIQUE AMD 10:

Strong solvency performance:

AGNIQUE AMD 10 helps dissolve poorly water-soluble active ingredients in agrochemical formulations.

Co-solvent function:

AGNIQUE AMD 10 can be used as an effective co-solvent in emulsifiable concentrate systems.

Low viscosity:

AGNIQUE AMD 10 supports easier mixing, pumping, and handling during formulation preparation.

Hydrophobic character:

AGNIQUE AMD 10 is suitable for oil-based and low-water-solubility formulation systems.

Formulation stability:

AGNIQUE AMD 10 helps improve compatibility between active ingredients, solvents, and emulsifier systems.

High boiling point:

AGNIQUE AMD 10 provides lower volatility compared with many lighter solvents.

High flash point:

AGNIQUE AMD 10 supports safer handling in industrial formulation processes.

Application flexibility:

AGNIQUE AMD 10 can be used in pesticide, fungicide, herbicide, and other crop protection formulations.

Stability and Reactivity of AGNIQUE AMD 10:

Chemical stability:

AGNIQUE AMD 10 is stable under normal conditions of use, handling, and storage.

Reactivity:

No hazardous reactions are expected under normal processing conditions.

Conditions to avoid:

Excessive heat, ignition sources, poor ventilation, and incompatible materials should be avoided.

Incompatible materials:

Oxidizing agents should be avoided.

Hazardous decomposition products:

Thermal decomposition or fire may produce carbon oxides and nitrogen oxides.

Handling and Storage of AGNIQUE AMD 10:

Handling:

Handle in accordance with good industrial hygiene and safety practices.

Safe handling:

Avoid inhalation, ingestion, and direct contact with skin, eyes, and clothing.

Ventilation:

Use adequate ventilation and prevent the formation of vapour or mist.

Storage:

Store in a cool, dry, and well-ventilated area.

Storage conditions:

Keep the container tightly closed when not in use.

Storage precautions:

Keep away from heat, ignition sources, and incompatible materials.

First Aid Measures of AGNIQUE AMD 10:

Inhalation:

Remove the person to fresh air and keep comfortable for breathing.

Skin contact:

Wash skin with plenty of soap and water.

Eye contact:

Rinse cautiously with water for several minutes.

Ingestion:

Rinse mouth with water and seek medical advice if symptoms occur.

General advice:

Remove contaminated clothing and seek medical attention if irritation or symptoms persist.

Firefighting Measures of AGNIQUE AMD 10:

Suitable extinguishing media:

Use dry powder, foam, water spray, or carbon dioxide.

Unsuitable extinguishing media:

No specific unsuitable extinguishing media is reported, but strong direct water jets should generally be avoided.

Special hazards:

Fire may produce carbon oxides and nitrogen oxides.

Protective equipment:

Firefighters should wear self-contained breathing apparatus and full protective clothing.

Additional information:

Keep containers away from heat and ignition sources.

Accidental Release Measures of AGNIQUE AMD 10:

Personal precautions:

Use suitable personal protective equipment and ensure adequate ventilation.

Environmental precautions:

Do not allow the product to enter drains, surface water, soil, or the environment.

Containment methods:

Stop the leak if AGNIQUE AMD 10 is safe to do so.

Cleaning methods:

Absorb with inert absorbent material and collect into suitable closed containers for disposal.

Waste disposal:

Dispose of contaminated material according to local and national regulations.

Exposure Controls / Personal Protection of AGNIQUE AMD 10:

Engineering controls:

Use adequate ventilation, local exhaust, and suitable workplace safety equipment such as eyewash stations and safety showers.

Respiratory protection:

Respiratory protection is normally not required under proper ventilation, but suitable respiratory protection should be used if vapour, mist, or spray exposure may occur.

Hand protection:

Wear chemical-resistant protective gloves.

Eye protection:

Wear safety glasses, chemical goggles, or face protection.

Skin protection:

Wear suitable protective clothing to prevent skin exposure.

Hygiene measures:

Wash hands and face thoroughly after handling.

Do not eat, drink, or smoke while handling the product.

Identifiers of AGNIQUE AMD 10:

Product number: PRD 30529971

Chemical name: N,N-Dimethyldecanamide

IUPAC / EC name: N,N-dimethyldecan-1-amide

CAS Number: 14433-76-2

EC Number: 238-405-1

Molecular formula: C12H25NO

Molecular mass: 199.33–199.34 g/mol

Chemical class: Fatty amide / C10 N,N-dimethyl amide solvent

Physical form: Liquid

Purity / concentration: ≥98%

InChI Key: HNXNKTMIVROLTK-UHFFFAOYSA-N

SMILES: CCCCCCCCCC(=O)N(C)C

Product Number (PRD): 30529971

Product CAS Details: 14433-76-2

Properties of AGNIQUE AMD 10:

Physical state: Liquid

Appearance: Colorless to yellow liquid

Chemical class: Amide / fatty acid dimethyl amide

Chemical nature: C10 N,N-dimethyl amide

Active content: ≥ 98%

Density: Approximately 0.88 kg/L at 25 °C

Viscosity: 5.7 mPa·s at 25 °C

Pour point: -7 °C

Melting point: -6 °C

Boiling point: 291 °C

Flash point: 147 °C

Water solubility: < 0.5% at 20 °C / partly soluble

Volatility: Low volatility