AGNIQUE ABS 70 C
AGNIQUE ABS 70 C supports strong and reliable emulsion formation in agrochemical products containing oil-soluble active ingredients.
AGNIQUE ABS 70 C is used to improve the physical stability, dispersion quality, and spray performance of pesticide formulations.
AGNIQUE ABS 70 C acts as a high-active anionic surfactant that helps crop protection formulations remain uniform after dilution with water.
CAS Number: 84989-14-0
EC Number: 284-903-7
Synonyms: Alkylbenzene sulfonate in isobutanol, Alkyl benzene sulfonate in organic solvent, Alkylbenzene sulfonate solution, Calcium alkylbenzene sulfonate solution, Calcium alkylbenzene sulfonate in isobutanol, Benzenesulfonic acid, C10-13 alkyl derivatives, calcium salts, Benzenesulfonic acid, 4-C10-13-sec-alkyl derivatives, calcium salts, Anionic alkylbenzene sulfonate emulsifier, Anionic agrochemical emulsifier, Agrochemical EC emulsifier, Crop protection formulation emulsifier
AGNIQUE ABS 70 C is a higher-active anionic emulsifier used mainly in agrochemical formulations.
AGNIQUE ABS 70 C is based on alkylbenzene sulfonate dissolved in isobutanol and contains approximately 70% active material.
AGNIQUE ABS 70 C helps oil-based pesticide and crop protection formulations disperse properly in water and form stable emulsions.
AGNIQUE ABS 70 C is especially suitable for EC, EW, and SE formulation systems where strong emulsification, good dispersion, and improved physical stability are required.
Uses of AGNIQUE ABS 70 C:
AGNIQUE ABS 70 C is used as an anionic emulsifier in agrochemical formulations, especially in EC, EW, and SE systems.
AGNIQUE ABS 70 C helps oil-based pesticide and crop protection formulations disperse properly in water and form stable oil-in-water emulsions.
AGNIQUE ABS 70 C supports better emulsion stability, reduces phase separation, and improves formulation uniformity.
AGNIQUE ABS 70 C is mainly used in herbicide, insecticide, and fungicide formulations where hydrophobic active ingredients need to be converted into stable and sprayable products.
Advantages of AGNIQUE ABS 70 C:
AGNIQUE ABS 70 C provides strong emulsification performance because of its higher active content.
AGNIQUE ABS 70 C helps oil-based agrochemical formulations disperse evenly in water and form stable emulsions.
AGNIQUE ABS 70 C supports better physical stability, reduces oil separation, and improves formulation uniformity.
AGNIQUE ABS 70 C is useful in EC, EW, and SE systems where reliable dispersion, good handling, and stable sprayable formulations are required.
Stability and Reactivity of AGNIQUE ABS 70 C:
Chemical stability:
AGNIQUE ABS 70 C is stable under normal conditions of use, handling, and storage.
Reactivity:
No hazardous reactions are expected under normal conditions.
Conditions to avoid:
Heat, sparks, open flames, static discharge, high temperatures, and unsuitable storage conditions.
Incompatible materials:
Acids, alkalis, caustic materials, and reactive chemicals.
Hazardous decomposition products:
Thermal decomposition or fire may produce carbon oxides and sulfur oxides.
Handling and Storage of AGNIQUE ABS 70 C:
Handling:
Handle in accordance with good industrial hygiene and safety practices.
Avoid contact with skin, eyes, and clothing.
Use only with adequate ventilation.
Storage:
Store in a cool, dry, and well-ventilated area.
Keep containers tightly closed when not in use.
Storage conditions:
Keep away from heat, sparks, open flames, and ignition sources.
Store between 10 °C and 40 °C.
Packaging materials:
HDPE, stainless steel, and carbon steel containers are suitable.
Zinc and aluminum containers should be avoided.
Shelf life:
At least 24 months when stored properly in tightly closed original containers.
First Aid Measures of AGNIQUE ABS 70 C:
Inhalation:
Remove person to fresh air.
If breathing discomfort, dizziness, or symptoms persist, seek medical attention.
Skin contact:
Wash skin thoroughly with plenty of water.
Remove contaminated clothing if necessary.
Eye contact:
Rinse eyes carefully with water for at least 15 minutes.
Seek medical advice if irritation continues.
Ingestion:
Rinse mouth with water.
Drink water and seek medical attention.
Most important symptoms:
Irritation, dizziness, drowsiness, or respiratory discomfort may occur after exposure.
Firefighting Measures of AGNIQUE ABS 70 C:
Suitable extinguishing media:
Dry powder or alcohol-resistant foam may be used.
Specific hazards:
Flammable vapours, harmful vapours, carbon oxides, and sulfur oxides may form during fire.
Protective equipment for firefighters:
Self-contained breathing apparatus and full protective clothing should be worn.
Special precautions:
Keep away from ignition sources and collect contaminated extinguishing water for proper disposal.
Accidental Release Measures of AGNIQUE ABS 70 C:
Personal precautions:
Avoid contact with skin, eyes, and clothing.
Avoid breathing vapour or spray.
Use appropriate protective equipment.
Environmental precautions:
Prevent AGNIQUE ABS 70 C from entering drains, surface water, or groundwater.
Methods for cleanup:
Absorb spilled material with a suitable absorbent and collect it for proper disposal.
Exposure Controls / Personal Protection of AGNIQUE ABS 70 C:
Occupational exposure limits:
Follow local workplace exposure limits for isobutanol.
Engineering controls:
Adequate general ventilation is recommended.
Local exhaust ventilation may be needed if vapour, mist, or aerosol is formed.
Personal protective equipment (PPE):
Respiratory protection:
Use respiratory protection if vapour or mist is generated.
Hand protection:
Chemical-resistant protective gloves are recommended.
Eye protection:
Safety goggles or tightly fitting eye protection are recommended.
Skin protection:
Protective clothing should be worn if direct contact is possible.
Hygiene measures:
Wash hands after handling.
Avoid eating, drinking, or smoking in work areas.
Identifiers of AGNIQUE ABS 70 C:
Product number / PRD: 30534054
Product type: Anionic emulsifier
Main use: Agrochemical formulation additive
Chemical nature: Alkyl benzene sulfonate in isobutanol
Active content: Approximately 70%
Physical form: Liquid
CAS Number: 84989-14-0
EC Number: 284-903-7
Properties of AGNIQUE ABS 70 C:
Physical form: Liquid
Appearance: Yellow to brown, slightly turbid liquid
Chemical type: Anionic emulsifier
Active content: Approximately 70%
Solvent: Isobutanol
Solubility: Insoluble in water, but supports emulsion formation
pH: Approximately 6–7
Density: Approximately 1.03 g/cm³
Viscosity: Viscous liquid
Flash point: Approximately 29 °C
