1-9 A-D E-G H-M N-P Q-S T-Z

LICOWAX PE 520

LICOWAX PE 520

CAS No. : 9002-88-4
EC No. : -

Synonyms:
LICOWAX PE 520; Oxidized polyethylene; Ethene, homopolymer, oxidized; Polyethylene, oxidized; Polyethylene, partially oxidized; 6-hydroxy-5-methyl-4,11-dioxoundecanoic acid; Oxidized polyethylene wax; SCHEMBL15065168; LS-179964

EN

Licowax PE 520 Appearance : powder
Licowax PE 520 Colour : white
Licowax PE 520 Odour : not specified
Licowax PE 520 Odour Threshold : not determined
Licowax PE 520 pH : no data available
Licowax PE 520 Drop point : approx. 120 °C
Licowax PE 520 Boiling point : Decomposes below the boiling point.
Licowax PE 520 Flash point : Not applicable
Licowax PE 520 Evaporation rate : Not applicable
Licowax PE 520 Flammability (solid, gas) : does not ignite
Licowax PE 520 Burning number : 2 (20 °C)
Licowax PE 520 Upper explosion limit / upper
Licowax PE 520 flammability limit: Not applicable
Licowax PE 520 Lower explosion limit / Lower flammability limit : Not applicable
Licowax PE 520 Vapour pressure : Not applicable
Licowax PE 520 Relative vapour density : Not applicable
Licowax PE 520 Density : approx. 0.93 g/cm3 (23 °C)
Licowax PE 520 Method: ISO 1183
Licowax PE 520 Solubility(ies)
Licowax PE 520 Water solubility : insoluble (20 °C)
Licowax PE 520 Partition coefficient: noctanol/water: not determinable (polymer)
Licowax PE 520 Auto-ignition temperature : 420 °C
Licowax PE 520 Decomposition temperature : No decomposition if used as directed.
Licowax PE 520 Viscosity
Licowax PE 520 Viscosity, dynamic : approx. 650 mPa.s (140 °C)
Licowax PE 520 Viscosity, kinematic : Not applicable
Licowax PE 520 Explosive properties : Not explosive

Licowax PE 520 Product Type Additive > Waxes > Polyethylene waxes
Licowax PE 520 Applications:Coatings
Licowax PE 520 Industry:Cosmetics
Licowax PE 520 Chemical Composition:Polyethylene wax
Licowax PE 520 Other Applications:printing inks
Licowax PE 520 Industry sector : Polymers industry
Licowax PE 520 Type of use : Industrial uses are not restricted by REACH legislation.

Licowax PE 520 Classification of the substance or mixture
Classification (REGULATION (EC) No 1272/2008)
Not a hazardous substance or mixture.
Licowax PE 520 Label elements
Labelling (REGULATION (EC) No 1272/2008)
Not a hazardous substance or mixture.
Licowax PE 520 This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of
0.1% or higher.
No additional hazards are known except those derived from the labelling.

Licowax PE 520 General advice : Get medical advice/ attention if you feel unwell.
Licowax PE 520 If inhaled : Remove to fresh air.
Licowax PE 520 In case of skin contact : Cool skin rapidly with cold water after contact with molten material.Do not peel solidified product off the skin.Get medical attention.
Licowax PE 520 In case of eye contact : Rinse the affected eye with plenty of water, at the same time keep the unaffected eye well protected.
Licowax PE 520 If swallowed : If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

Licowax PE 520 Eye protection : Safety glasses
Licowax PE 520 Hand protection Remarks : Nitrile rubber gloves. Minimum breakthrough time (glove): not determined Minimum thickness (glove): not determined Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Licowax PE 520 Skin and body protection : working clothes
Licowax PE 520 Respiratory protection : In case of inadequate ventilation wear respiratory protection.
Licowax PE 520 Protective measures : When working with hot material, avoid contact with skin.

Licowax PE 520 Reactivity
No dangerous reaction known under conditions of normal use.
Licowax PE 520 Chemical stability
Stable
Licowax PE 520 Possibility of hazardous reactions
Hazardous reactions : The substance or mixture does not emit flammable gases in
contact with water.
Not corrosive to metals
The product is not a dust explosion risk as supplied; however
the build-up of fine dust can lead to a risk of dust explosions.
Licowax PE 520 Conditions to avoid
Conditions to avoid : None known.
Licowax PE 520 Incompatible materials
Materials to avoid : None.
Licowax PE 520 Hazardous decomposition products
The product does not contain any chemical groups which suggest self-reactive properties, nor is
the estimated SADT less than 75 °C, nor is the exothermic decomposition energy higher than 300

Licowax PE 520 powder is a polyethylene wax having medium molecular weight. Acts as a lubricant, dispersing agent, release agent, anti-scratch agent for rigid PVC extrusion. Provides good rub resistance, excellent anti-sticking properties, good thermostability and improved flowability. It is a non-polar grade. Suitable for PE masterbatch, elastomers and rubber applications. Complies with FDA regulation. Licowax PE 520 powder has a shelf life of 2 years.Licowax PE 520 powder is a medium-molecular weight, non-polar polyethylene wax.Licowax PE 520 powder is an efficient external lubricant for rigid PVC applications, providing excellent anti-sticking properties to the PVC melt, resulting in a smooth and glossy surface of the end article. It can also be used as an internal lubricant for polyolefins providing flow improvement of PE compounds and as an release agent for elastomers and rubber applications.Licowax PE 520 powder can be used in hotmelt adhesives as viscosity modifier. Depending on the dosage, open and set time can be adjusted.Licowax PE 520 is an efficient external lubricant for rigid PVC applications, providing excellent anti-sticking properties to the PVC melt, resulting in a smooth and glossy surface of the end article. As well it can be used as an internal lubricant for polyolefins providing flow improvement of PE compounds and as an release agent for elastomers and rubber applications.It is also an effective dispersing agent for PE masterbatch applications, providing excellent organoleptic properties, brilliant dispersing properties for pigments, fillers and additives as well as thermal stability.Licowax PE 520 can be used in hotmelt adhesives as viscosity modifier. Depending on the dosage, open and set time can be adjusted.It can also be used as a wax compound in printing inks to provide rub and scratch resistance as well as a slip modification additive. It is especially recommend for offset printing inks.Licowax PE 520 Powder is a polyethylene wax. Acts as a matting agent. Improves the scrub resistance of printing inks. Acts as abrasive, oral care agent and viscosity controlling agent.

TR

Licowax PE 520 Görünüm: toz
Licowax PE 520 Renk: beyaz
Licowax PE 520 Koku: belirtilmemiş
Licowax PE 520 Koku Eşiği: belirlenmemiş
Licowax PE 520 pH: veri yok
Licowax PE 520 Bırakma noktası: yakl. 120 ° C
Licowax PE 520 Kaynama noktası: Kaynama noktasının altında ayrışır.
Licowax PE 520 Parlama noktası: Uygulanamaz
Licowax PE 520 Buharlaşma hızı: Uygulanamaz
Licowax PE 520 Yanıcılık (katı, gaz): tutuşmaz
Licowax PE 520 Yazma sayısı: 2 (20 ° C)
Licowax PE 520 Üst patlama sınırı / üst
Licowax PE 520 tutuşabilirlik sınırı: Uygulanamaz
Licowax PE 520 Alt patlama sınırı / Alt tutuşabilirlik sınırı: Uygulanamaz
Licowax PE 520 Buhar basıncı: Uygulanamaz
Licowax PE 520 Nispi buhar yoğunluğu: Uygulanamaz
Licowax PE 520 Yoğunluk: yakl. 0,93 g / cm3 (23 ° C)
Licowax PE 520 Yöntemi: ISO 1183
Licowax PE 520 Çözünürlük (ler)
Licowax PE 520 Suda çözünürlüğü: çözünmez (20 ° C)
Licowax PE 520 Dağılım katsayısı: noktanol / su: belirlenemez (polimer)
Licowax PE 520 Kendiliğinden tutuşma sıcaklığı: 420 ° C
Licowax PE 520 Bozunma sıcaklığı: Belirtildiği şekilde kullanılırsa bozunma olmaz.
Licowax PE 520 Viskozite
Licowax PE 520 Viskozite, dinamik: yakl. 650 mPa.s (140 ° C)
Licowax PE 520 Viskozite, kinematik: Uygulanamaz
Licowax PE 520 Patlayıcı özellikler: Patlayıcı değil

Licowax PE 520 Ürün Tipi Katkı Maddesi> Vakslar> Polietilen mumlar
Licowax PE 520 Uygulamalar: Kaplamalar
Licowax PE 520 Industry: Kozmetik
Licowax PE 520 Kimyasal Bileşimi: Polietilen balmumu
Licowax PE 520 Diğer Uygulamalar: baskı mürekkepleri
Licowax PE 520 Endüstri sektörü: Polimerler endüstrisi
Licowax PE 520 Kullanım türü: Endüstriyel kullanımlar REACH mevzuatı ile sınırlandırılmamıştır.

Licowax PE 520 Madde veya karışımın sınıflandırılması
Sınıflandırma (1272/2008 SAYILI TÜZÜĞÜ (AT))
Tehlikeli bir madde veya karışım değildir.
Licowax PE 520 Etiket öğeleri
Etiketleme (1272/2008 SAYILI TÜZÜĞÜ (AT))
Tehlikeli bir madde veya karışım değildir.
Licowax PE 520 Bu madde / karışım, kalıcı olarak kabul edilen hiçbir bileşen içermez.
biyolojik biriken ve toksik (PBT) veya çok kalıcı ve çok biyolojik birikim yapan (vPvB)
% 0.1 veya daha yüksek.
Etiketlemeden elde edilenler dışında hiçbir ek tehlike bilinmemektedir.

Licowax PE 520 Genel öneri: Kendinizi iyi hissetmiyorsanız tıbbi tavsiye / yardım alın.
Licowax PE 520 Solunursa: Temiz havaya çıkarın.
Licowax PE 520 Ciltle temas halinde: Erimiş maddeyle temas ettikten sonra cildi soğuk suyla hızla soğutun. Katılaşmış ürünü ciltten soymayın. Tıbbi yardım alın.
Licowax PE 520 Gözle teması halinde: Etkilenen gözü bol su ile yıkayın, aynı zamanda etkilenmemiş gözü iyi koruyun.
Licowax PE 520 Yutulması halinde: Yutulduğunda kusturmaya çalışmayın, tıbbi yardım alın ve güvenlik veri sayfası veya etiketini gösterin

Licowax PE 520 Gözlerin korunması: Güvenlik gözlükleri
Licowax PE 520 Ellerin korunması Notlar: Nitril kauçuk eldivenler. Minimum delinme süresi (eldiven): belirlenmedi Minimum kalınlık (eldiven): belirlenmedi Üretici tarafından verilen geçirgenlik ve kırılma süreleri ile özel çalışma koşulları (mekanik zorlanma, temas süresi) ile ilgili bilgilere dikkat edin.
Licowax PE 520 Deri ve vücudun korunması: iş kıyafetleri
Licowax PE 520 Solunum koruması: Yetersiz havalandırma durumunda solunum koruyucu giyin.
Licowax PE 520 Koruyucu önlemler: Sıcak malzeme ile çalışırken ciltle temasından kaçının.

Licowax PE 520 Reaktivite
Normal kullanım koşulları altında bilinen tehlikeli bir reaksiyon yoktur.
Licowax PE 520 Kimyasal kararlılık
Kararlı
Licowax PE 520 Zararlı tepkime olasılığı
Tehlikeli reaksiyonlar: Madde veya karışım, içinde yanıcı gazlar yaymaz.
su ile temas.
Metaller için aşındırıcı değildir
Ürün, tedarik edildiği gibi toz patlaması riski taşımaz; ancak
ince toz birikmesi toz patlaması riskine yol açabilir.
Licowax PE 520 Kaçınılması gereken koşullar
Kaçınılması gereken koşullar: Bilinmiyor.
Licowax PE 520 Uyumsuz malzemeler
Kaçınılması gereken malzemeler: Yok.
Licowax PE 520 Zararlı bozunma ürünleri
Ürün, kendiliğinden tepkimeye giren özellikler gösteren herhangi bir kimyasal grup içermez ve
tahmini SADT 75 ° C'den düşük ve ekzotermik ayrışma enerjisi 300'den yüksek değil

Licowax PE 520 tozu, orta moleküler ağırlığa sahip bir polietilen mumdur. Sert PVC ekstrüzyonu için yağlayıcı, dispersiyon ajanı, ayırıcı ajan, çizilmez ajan görevi görür. İyi sürtünme direnci, mükemmel yapışma önleme özellikleri, iyi termostabilite ve gelişmiş akışkanlık sağlar. Polar olmayan bir derecedir. PE masterbatch, elastomerler ve kauçuk uygulamaları için uygundur. FDA yönetmeliğine uygundur. Licowax PE 520 tozunun raf ömrü 2 yıldır.Licowax PE 520 tozu, orta moleküler ağırlıklı, polar olmayan bir polietilen mumdur.Licowax PE 520 tozu, sert PVC uygulamaları için mükemmel yapışma önleyici özellikler sağlayan verimli bir harici yağlayıcıdır. PVC eriyerek pürüzsüz ve parlak bir yüzey sağlar.e son makale. Ayrıca, poliolefinler için PE bileşiklerinin akış iyileştirmesini sağlayan dahili bir yağlayıcı olarak ve elastomerler ve kauçuk uygulamaları için bir ayırıcı madde olarak kullanılabilir. Doza bağlı olarak açma ve sabitleme süresi ayarlanabilir.Licowax PE 520, sert PVC uygulamaları için verimli bir harici yağlayıcıdır, PVC eriyiklerine mükemmel yapışma önleme özellikleri sağlar ve sonuçta son ürünün pürüzsüz ve parlak bir yüzeyini sağlar. Aynı zamanda poliolefinler için dahili bir yağlayıcı olarak PE bileşiklerinin akış iyileştirmesini sağlayan ve elastomerler ve kauçuk uygulamaları için bir ayırıcı olarak kullanılabilir.Aynı zamanda PE masterbatch uygulamaları için mükemmel organoleptik özellikler, mükemmel dispersiyon özellikleri sağlayan etkili bir dispersiyon ajanıdır. pigmentler, dolgu maddeleri ve katkı maddelerinin yanı sıra termal stabilite.Licowax PE 520 viskozite düzenleyici olarak hotmelt yapıştırıcılarda kullanılabilir. Dozaja bağlı olarak açma ve bekleme süresi ayarlanabilir.Ayrıca, baskı mürekkeplerinde sürtünme ve çizilme direnci sağlamak için balmumu bileşiği ve kayma modifikasyon katkısı olarak da kullanılabilir. Özellikle ofset baskı mürekkepleri için tavsiye edilir.Licowax PE 520 Powder polietilen bir mumdur. Paspas ajanı olarak davranır. Baskı mürekkeplerinin ovma direncini artırır. Aşındırıcı, ağız bakım maddesi ve viskozite kontrol maddesi olarak işlev görür.

Ataman Chemicals © 2015 All Rights Reserved.