Tylose MHS 30027 P6
Tylose MHS 30027 P6. Product properties: Tylose MHS 30027 P6 is a medium viscosity, modified methyl hydroxyethyl cellulose. Tylose MHS 30027 P6 is mainly recommended for cementitious base renders.
It ensures sufficient water retention and gives good adhesion strength. The special modification of Tylose MHS 30027 P6 provides an easy and non-sticky workability. The retarding effect on the setting time of the cement is minimised.
Typical data
Viscosity *: 20000-27000 mPas
Moisture, as packed: max. 6 %
NaCl content:max. 1.5 %
Particle size: very fine powder
* Brookfield RV, 1.9% water, 20°C, 20° dH (German hardness)
Recommended fields of application
Cement renders
Skim coats
Adhesives for block laying
Application performance
Consistency development:very fast
Final consistency:moderate
Sag resistance:moderate
Water demand:moderate
Water retention:high
Cement retardation:low
Heat stability:high
Application properties
Tylose MHS 30027 P6 is mainly recommended for cementitious base renders.
It ensures sufficient water retention and gives good adhesion strength.
The special modification provides an easy and non-sticky workability.
The retarding effect on the setting time of the cement is minimised.
Packaging, storage and safety instructions
This Tylose type is supplied in multilayer paper bags with polyethylene intermediate layer and/or in big bags.
When kept in clean, dry conditions in its original packing, Tylose can be stored for a long time.
During storage a slow loss of viscosity can be measured. Tylose absorbs water from moist air.
Once opened, container must be resealed and kept tightly closed.
Like all fine particle organic substances, cellulose ethers constitute a dust explosion hazard.
Dust formation and deposits must be kept to a minimum so that no ignitable dust/air mixtures can form.
Ignition sources such as naked flames, hot surfaces, sparks and static electricity should be avoided.
Please refer to Safety Data Sheet (SDS) for more information.
