1-9 A-D E-G H-M N-P Q-S T-Z

EMULSOGEN EPA 073

EMULSOGEN EPA 073

CAS No. : 219756-63-5

 

Synonyms:
Alkyl polyethylene glycol ether sulphate; ethylene oxide; sodium salt; Poly(oxy-1,2-ethanediyl), alpha-sulfo-omega-(undecyloxy)-, branched and linear, sodium salt; Eicosapentaenoic acid; Poly(oxy-1,2-ethanediyl), alpha-sulfo-omega-(hexadecenyloxy)-, sodium salt; 1-Hexadec-1-enoxyhexadec-1-ene; Poly(oxy-1,2-ethanediyl); Alkyl polyethylene glycol ether sulphate with 7 mole ethylene oxide, sodium salt; Sodium laureth sulfate

 

 


EMULSOGEN EPA 073

 

 

Anionic emulsifier, wetting and dispersing agent
COMPOSITION
Alkyl polyethylene glycol ether sulphate with 7 mole ethylene oxide, sodium salt
PRODUCT PROPERTIES*)
Active substance content About 28% in water
Appearance
At 5°C
at 20°C
at 45°C
clear, colourless liquid
clear, colourless liquid
clear, colourless liquid
pH value (DIN EN 1262), 1% in water About 7
Solubility at 20 °C Soluble in water
Density (DIN 51757) At 20°C: about 1,05 g/cm3
At 50°C: about 1,03 g/cm3
Viscosity (Hoeppler) at 25 °C About 40 mPas
Boiling point About 100°C
Flash point > 100°C
Electrolyte content < 0,5%
Surface Activity and CMC
At 5 g/l active substance in water: About 38 mN/m
Critical micelle concentration: About 1 g/l active substance
BfR** Listing Teil A Kapitel XIV, XXXIV
FDA*** Notifications for Food Contact
Substances
For use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food.
USE
Emulsogen EPA 073 is an anionic surfactant for industrial applications like the following:
EMULSION POLYMERIZATION
Emulsogen EPA 073 is used as an emulsifier for emulsion polymerization of monomers like styrene, acrylic acid esters, methacrylic acid esters and vinyl acetate. The use of Emulsogen EPA 073 offers the following advantages:
- production of polymer dispersions with controlled particle size
- very low grit levels at high solid contents.
Usage levels: 0,5 - 5,0 % based on monomers.
PIGMENT PREPARATIONS
Emulsogen EPA 073 is used as a wetting agent for inorganic and organic pigments in preparations
- at high pigment loads
- at low viscosity
- high temperature stability and shelf life.
Usage levels: 15 - 80 % based on the pigments.
EMULSIONS OF SOLVENTS, OILS AND WAXES IN WATER
Emulsogen EPA 073 produces stable, low foaming emulsions of organic solvents, hydrocarbons, oils and waxes in water.
Usage levels: 1 - 20 g/l Emulsogen EPA 073 in the emulsion.

 

 


EMULSOGEN EPA 073

 

 

Anyonik emülgatör, ıslatıcı ve dispersiyon ajanı
KOMPOZİSYON
7 mol etilen oksit, sodyum tuzu ile alkil polietilen glikol eter sülfat
ÜRÜN ÖZELLİKLERİ *)
Aktif madde içeriği Suda yaklaşık% 28
Görünüm
5 ° C`de
20 ° C`de
45 ° C`de
berrak, renksiz sıvı
berrak, renksiz sıvı
berrak, renksiz sıvı
pH değeri (DIN EN 1262), suda% 1 Yaklaşık 7
20 ° C`de çözünürlük Suda çözünür
Yoğunluk (DIN 51757) 20 ° C`de: yaklaşık 1,05 g / cm3
50 ° C`de: yaklaşık 1,03 g / cm3
25 ° C`de Viskozite (Hoeppler) Yaklaşık 40 mPas
Kaynama noktası Yaklaşık 100 ° C
Parlama noktası> 100 ° C
Elektrolit içeriği <% 0,5
Yüzey Aktivitesi ve CMC
Sudaki 5 g / l aktif maddede: Yaklaşık 38 mN / m
Kritik misel konsantrasyonu: Yaklaşık 1 g / l aktif madde
BfR ** Teil A Kapitel XIV, XXXIV Listeleniyor
FDA *** Gıdayla Temas Bildirimleri
Maddeler
Akrilik ve modifiye akrilik polimerlerin ve 21 C.F.R. 176.170 ve 176.180 numaralı bölümler tüm yiyecek türleriyle temas halindedir.
KULLANIM
Emulsogen EPA 073, aşağıdakiler gibi endüstriyel uygulamalar için anyonik bir yüzey aktif maddedir:
EMÜLSİYON POLİMERİZASYONU
Emulsogen EPA 073, stiren, akrilik asit esterleri, metakrilik asit esterleri ve vinil asetat gibi monomerlerin emülsiyon polimerizasyonu için bir emülgatör olarak kullanılır. Emulsogen EPA 073 kullanımı aşağıdaki avantajları sunar:
- kontrollü partikül boyutuna sahip polimer dispersiyonlarının üretimi
- yüksek katı içeriklerde çok düşük kum seviyeleri.
Kullanım seviyeleri: Monomerlere göre% 0,5 - 5,0.
PİGMENT HAZIRLIKLARI
Emulsogen EPA 073, müstahzarlarda inorganik ve organik pigmentler için ıslatıcı olarak kullanılır.
- yüksek pigment yüklerinde
- düşük viskozitede
- yüksek sıcaklık kararlılığı ve raf ömrü.
Kullanım seviyeleri: Pigmentlere göre% 15 - 80.
SUDA ÇÖZÜCÜLER, YAĞLAR VE MUMLARIN EMÜLSİYONLARI
Emulsogen EPA 073, suda organik çözücüler, hidrokarbonlar, yağlar ve balmumlarının kararlı, düşük köpüren emülsiyonlarını üretir.
Kullanım seviyeleri: 1 - 20 g / l Emülsojen EPA 073 emülsiyon içinde.

 

 


EMULSOGEN EPA 073

 

 

Émulsifiant anionique, agent mouillant et dispersant
COMPOSITION
Sulfate d`éther alkyl polyéthylène glycol avec 7 moles d`oxyde d`éthylène, sel de sodium
PROPRIÉTÉS DU PRODUIT *)
Teneur en substance active Environ 28% dans l`eau
Apparence
À 5 ° C
à 20 ° C
à 45 ° C
liquide clair et incolore
liquide clair et incolore
liquide clair et incolore
Valeur pH (DIN EN 1262), 1% dans l`eau Environ 7
Solubilité à 20 ° C Soluble dans l`eau
Densité (DIN 51757) à 20 ° C: environ 1,05 g / cm3
À 50 ° C: environ 1,03 g / cm3
Viscosité (Hoeppler) à 25 ° C Environ 40 mPas
Point d`ébullition Environ 100 ° C
Point d`éclair> 100 ° C
Teneur en électrolyte <0,5%
Activité de surface et CMC
À 5 g / l de substance active dans l`eau: environ 38 mN / m
Concentration micellaire critique: environ 1 g / l de substance active
BfR ** Liste Teil A Kapitel XIV, XXXIV
Notifications FDA *** pour contact alimentaire
Les substances
À utiliser comme émulsifiant dans la production de polymères acryliques et acryliques modifiés et de copolymères d`acétate de vinyle utilisés comme liants pigmentaires dans les revêtements pour papiers et cartons conformes à 21 C.F.R. Les articles 176.170 et 176.180 en contact avec tous les types d`aliments.
UTILISATION
Emulsogen EPA 073 est un tensioactif anionique pour des applications industrielles telles que:
POLYMÉRISATION D`ÉMULSION
Emulsogen EPA 073 est utilisé comme émulsifiant pour la polymérisation en émulsion de monomères comme le styrène, les esters d`acide acrylique, les esters d`acide méthacrylique et l`acétate de vinyle. L`utilisation d`Emulsogen EPA 073 offre les avantages suivants:
- production de dispersions de polymères à granulométrie contrôlée
- niveaux de grain très faibles à haute teneur en solides.
Niveaux d`utilisation: 0,5 - 5,0% à base de monomères.
PRÉPARATIONS PIGMENTAIRES
Emulsogen EPA 073 est utilisé comme agent mouillant pour les pigments inorganiques et organiques dans les préparations
- à des charges pigmentaires élevées
- à faible viscosité
- stabilité à haute température et durée de conservation.
Niveaux d`utilisation: 15 - 80% sur la base des pigments.
ÉMULSIONS DE SOLVANTS, HUILES ET CIRES DANS L`EAU
Emulsogen EPA 073 produit des émulsions stables et peu moussantes de solvants organiques, d`hydrocarbures, d`huiles et de cires dans l`eau.
Niveaux d`utilisation: 1 - 20 g / l d`Emulsogen EPA 073 dans l`émulsion.

 

 


ЭМУЛЬСОГЕН EPA 073

 

 

Анионный эмульгатор, смачиватель и диспергирующий агент
СОЧИНЕНИЕ
Сульфат алкилполиэтиленгликолевого эфира с 7 моль этиленоксида, натриевая соль
СВОЙСТВА ПРОДУКТА *)
Содержание активного вещества Около 28% в воде
Внешность
При 5 ° C
при 20 ° C
при 45 ° C
прозрачная бесцветная жидкость
прозрачная бесцветная жидкость
прозрачная бесцветная жидкость
Значение pH (DIN EN 1262), 1% в воде Около 7
Растворимость при 20 ° C Растворим в воде.
Плотность (DIN 51757) при 20 ° C: около 1,05 г / см3
При 50 ° C: около 1,03 г / см3
Вязкость (по Хепплеру) при 25 ° C Около 40 мПа · с
Температура кипения Около 100 ° C
Температура вспышки> 100 ° C
Содержание электролита <0,5%
Поверхностная активность и CMC
При 5 г / л активного вещества в воде: около 38 мН / м
Критическая концентрация мицелл: около 1 г / л активного вещества
BfR ** Объявление Teil A Kapitel XIV, XXXIV
FDA *** Уведомления о контакте с пищевыми продуктами
Вещества
Для использования в качестве эмульгатора при производстве акриловых и модифицированных акриловых полимеров и сополимеров винилацетата, используемых в качестве связующих пигментов в покрытиях для бумаги и картона, соответствующих 21 C.F.R. Разделы 176.170 и 176.180 контактируют со всеми видами пищевых продуктов.
ИСПОЛЬЗОВАТЬ
Emulsogen EPA 073 - это анионное поверхностно-активное вещество для следующих промышленных применений:
ЭМУЛЬСИОННАЯ ПОЛИМЕРИЗАЦИЯ
Emulsogen EPA 073 используется в качестве эмульгатора для эмульсионной полимеризации мономеров, таких как стирол, сложные эфиры акриловой кислоты, сложные эфиры метакриловой кислоты и винилацетат. Использование Emulsogen EPA 073 дает следующие преимущества:
- производство полимерных дисперсий с контролируемым размером частиц
- очень низкая зернистость при высоком содержании твердых частиц.
Уровни использования: 0,5 - 5,0% в расчете на мономеры.
ПИГМЕНТНЫЕ ПРЕПАРАТЫ
Эмульсоген EPA 073 используется в качестве смачивающего агента для неорганических и органических пигментов в препаратах.
- при высоких пигментных нагрузках
- при низкой вязкости
- высокая температурная стабильность и срок хранения.
Уровни использования: 15 - 80% в зависимости от пигментов.
ЭМУЛЬСИИ РАСТВОРИТЕЛЕЙ, МАСЛА И ВОСКОВ В ВОДЕ
Emulsogen EPA 073 производит стабильные эмульсии с низким пенообразованием органических растворителей, углеводородов, масел и восков в воде.
Уровни использования: 1 - 20 г / л Emulsogen EPA 073 в эмульсии.

 

Ataman Chemicals © 2015 All Rights Reserved.