1-9 A-D E-G H-M N-P Q-S T-Z

GENAPOL PF 80 FP

Cas no:9003-11-6, Genapol PF 80, NONIONIC EMULSIFIER FOR EMULSION POLYMERIZATION. Genapol PF 80  is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate. Genapol PF 80 is a pore-forming dispersant and plasticizer for plasters, mortars and putties based on cement, lime or gypsum

Benefits
The use of Genapol PF 080 offers the following advantages:

Product properties:

low VOC
free of alkylphenol ethoxylates (APEO)
readily biodegradable
hazard label free
FDA approved


Performance in emulsion polymerization:

maintains low viscosity of polymer emulsion at different shear rates
enhanced electrolyte stability
improved shelf life (high freeze thaw stability)
similar polymerization results to APEOs

Product group: EO/PO block copolymer
Active content: 100%
Appearance: white wax
pH value:
Solubility: 1% in water: clear solution
Viscosity: approx. 900 - 1500 mPas 
Melting point: approx. 58 °C
Flash point: > 250 °C
HLB value: approx. 16

Composition
Block copolymer of propylene oxide and ethylene oxide, containing 80% w/w ethylene oxide
Product properties *)
Molecular weight [g/mol]: approx. 8000
Concentration [%]: approx. 100
Appearance at 20°C: white wax / pellet or powder
Ionicity: nonionic
Viscosity of the molten product at 70°C [mPas]: 900 - 1500
pH value (1% aqueous solution): about 7.0
Solubility at 20°C
1% in water: clear solution
10% in mineral oil: cloudy solution
10% in xylene: cloudy solution
Melting point [°C]: approx. 58°C
Flash point [°C]: > 250°C
Cloud point (1g in 100 ml 10% NaCl solution) [°C]: approx. 70
HLB value: approx. 16

GENAPOL PF 80
Composition and properties

Polymerization product of propylene oxide and ethylene oxide appearance - white powder
charge - non-ionic
reaction - almost neutral

resistance to water hardness - very good
alkali - good
acids - good
electrolytes - good

Genapol PF 80 (fine powder)
particle size> 500 µm - max ... 20% 
particle size> 800 µm - max. 0.8%

Genapol PF 80 P (powder)
particle size <200 µm - max. 25% 
particle size 200 - 400 µm - 35 - 55% 
particle size 400 - 630 µm - 25 - 45%
particle size> 630 µm - max. fifteen %

Dosage

0.01-0.05 wt% for dry construction mixture.

Application area

Genapol PF 80 is a pore-forming dispersant and plasticizer for plasters, mortars and putties based on cement, lime or gypsum. Genapol PF 80 improves the processability, softness and surface smoothness of building materials. Dispersion of fine particles of mineral binders and pigments is ensured and the stickiness of plasters and solutions containing methylcellulose on the instrument is reduced.
With Genapol PF 80, lump formation in gypsum plasters is reduced and the processing time is significantly extended. Genapol PF 80 is compatible with all anionic and nonionic surfactants as well as Mecellose methylcelluloses. The formation of air pores with Genapol PF 80 depends on the composition of the respective building mixtures and the time and intensity of mixing.

Compatibility
Genapol PF 80 can be used in combination with othernonionic, anionic and cationic surfactants. Genapol PF 80 is resistant to water hardness, metal salts and to
acids and alkalis in the concentrations normally used. Preliminary tests are required.

Use
Genapol PF 80 has a good wetting and dispersing action coupled with a low foaming tendency.
Genapol PF is used as a low-foaming surfactant with very good dispersing action in detergent and cleaning agent powders. These can be produced simply by mixing the powder components.
Genapol PF 80 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations.
Other applications include reactions in the chemicalindustry.

Storage
Genapol PF 80 can be stored for at least to 2 years in original sealed containers at room temperature under the recommended conditions.
Genapol PF 80 undergoes no change whatever in product properties when exposed to cold during transport and storage.

Genapol PF 80 is supplied also in the form of very fine beads. It is an appropriate choice for powder-type detergents and cleaners if surfactants cannot be sprayed on in liquid or paste from. It is easy to blend with other
powders, and it has the added advantage of preventing dusting.
It can be used to disperse suspended calcium and magnesium salts, and to remove and disperse soil in acid pickling baths. Because it is nonionic, it can be used for cleaning metal electrolytically.
It can also be employed to solubilise essential oils and to emulsify monomers
 
GENAPOL PF 80 FP

CAS No. : 9003-11-6

 

Synonyms:
2-methyloxirane; oxirane ; EO-PO block polymer with 80 % EO, Genapol PF 80, Pluronic PE 6800
106392-12-5, 11104-97-5, 1,2-Propyleneglycol, ethoxylated and propoxylated, 2-methyloxirane; oxirane, 53637-25-5, 60407-69-4, 65187-10-2, 69070-95-7, 75-H-1400, 75H90000, 9003-11-6, Adeka 25R1, Adeka 25R2, Adeka L 61, Adeka Pluronic F 108, AIDS162017, AIDS-162017, alpha-Hydro-omega-hydroxypoly(oxyethylene)a-poly(oxopropylene)b-poly(oxyethylene)a block copolymer, .alpha.-Hydro-.omega.-hydroxypoly(oxyethylene)poly(oxypropylene)poly(oxyethylene) block copolymer, alpha-Hydro-omega-hydroxypoly(oxyethylene)(sub a)-poly(oxopropylene)(sub b)-poly(oxyethylene)(sub a) block copolymer, Antarox 17R4, Antarox 25R2, Antarox B 25, Antarox F 108, Antarox F 68, Antarox F 88, Antarox F 88FL, Antarox L 61, Antarox L 72, Antarox P 104, Antarox P 84, Antarox SC 138, Arcol E 351, Arco Polyol R 2633, B 053, BASF-L 101, Berol TVM 370, Bloat Guard, Block polyethylene-polypropylene glycol, Block polyoxyethylene-polyoxypropylene, Breox BL 19-10, BSP 5000, C10H22O3, C5H10O2, Cirrasol ALN-WS, component of Casakol, component of Epitrate, Crisvon Assistor SD 14, Crl 1005, CRL 1605, CRL 8131, CRL 8142, D01941, D06502, D 500 (polyglycol), Daltocel F 460, Dehypon KE 3557, Detalan, Eban 710, Emkalyx EP 64, Emkalyx L101, Emkalyx L 101, Empilan P 7068, Emulgen PP 230, Epan 450, Epan 485, Epan 710, Epan 750, Epan 785, Epan U 108, Epon 420, Ethylene glycol-propylene glycol block copolymer, Ethylene glycol-propylene glycol polymer, ethylene oxide; propylene oxide, Ethylene oxide-propylene oxide block copolymer dipropylene glycol ether, Ethylene oxide-propylene oxide block copolymer ether with ethylene glycol, Ethylene oxide-propylene oxide block polymer, ETHYLENE OXIDE, PROPYLENE OXIDE BLOCK POLYMER, Ethylene oxide-propylene oxide copolymer, Exocorpol, Exocorpol (TN), F 108, F-108, F 127, F 77, F 87, F 88, Genapol PF 10, Glycols, polyethylenepolypropylene, Glycols, polyethylene-polypropylene, HSDB 7222, Hydrowet, Laprol 1502, LG 56, LS-101081, LS-72949, Lutrol F, Lutrol F (TN), M 90/20, Magcyl, Meroxapol 105, Methyloxirane-oxirane copolymer, Methyloxirane-oxirane polymer, Methyloxirane polymer with oxirane block, Monolan 8000E80, Monolan PB, N 480, Newpol PE-88, Niax 16-46, Niax LG 56, Nissan Pronon 201, Nixolen SL 19, NSC63908, NSC 63908, Oligoether L-1502-2-30, Oxirane-methyloxirane polymer, Oxirane, methyl-, polymer with oxirane, Oxirane, methyl-, polymer with oxirane, block, Oxirane, methyl-, polymer with oxirane, ether with 1,2-propanediol (2:1), Oxirane, polymer with methyloxirane, Oxyethylene Oxypropylene Polymer, P 103, P 104, P 105, P 123, P 65, P 84, P 85, PEG/PPG-125/30 Copolymer, Plonon 201, Plonon 204, Pluracare, Pluracol V, Pluriol PE, Pluriol PE 6810, Pluronic, Pluronic 10R8, Pluronic 31R2, Pluronic-68, Pluronic C 121, Pluronic F, Pluronic F108, Pluronic F 108, Pluronic F 125, Pluronic F127, Pluronic F 127, Pluronic F 38, Pluronic F68, Pluronic F 68, Pluronic F-68, Pluronic F 68LF, Pluronic F77, Pluronic F86, Pluronic F87, Pluronic F 87, Pluronic F87-A7850, Pluronic F88, Pluronic F 88, Pluronic F 98, Pluronic L, Pluronic L 101, Pluronic L-101, Pluronic L 121, Pluronic L 122, Pluronic L 24, Pluronic L 31, Pluronic L 35, Pluronic L44, Pluronic L 44, Pluronic L 61, Pluronic L62, Pluronic L 62, Pluronic l62(mw 2500), Pluronic L64, Pluronic L 64, Pluronic l64(mw 2900), Pluronic L 68, Pluronic L-81, Pluronic L 92, Pluronic P, Pluronic P103, Pluronic P104, Pluronic P 104, Pluronic P105, Pluronic P123, Pluronic P65, Pluronic P-65, Pluronic P 75, Pluronic P-75, Pluronic P84, Pluronic P85, Pluronic P 85, Poloxalene, Poloxalene 2930, Poloxalene L64, Poloxalene [USAN:BAN:INN], Poloxalene [USAN:INN:BAN], Poloxalkol, POLOXAMER, Poloxamer 101, Poloxamer 108, Poloxamer 182LF, Poloxamer 188, Poloxamer-188, Poloxamer 331, Poloxamer 407, Poloxamer (NF), Poloxamer [USAN:BAN:INN], Polyethylene glycol, propoxylated, Poly(ethylene oxide-co-propylene oxide), Polyethylene oxide-polypropylene oxide, Polyethylene oxide-polypropylene oxide copolymer, Polyethylene-Pluronic L-62LF, Polyethylene-polypropylene glycol, Polykol, Polylon 13-5, Poly(mixed ethylene, propylene)glycol, Polyoxamer 108, Polyoxyethylenated poly(oxypropylene), Polyoxyethylene (160) polyoxypropylene (30) glycol, Polyoxyethylene-oxy-propylene [French], Polyoxyethylene polyoxypropylene, Polyoxyethylene-polyoxypropylene, Polyoxyethylene - polyoxypropylene block copolymer, Polyoxyethylene - polyoxypropylene copolymer, Poly(oxyethylene)-poly(oxypropylene) glycol, Poly(oxyethylene)-poly(oxypropylene) polymer, Polyoxyethylene-polyoxypropylene polymer, Polyoxyethylene Polyoxypropylene Polyoxyethylene Polymer, Polyoxypropylene-polyoxyethylene block copolymer, Polypropoxylated, polyethoxylated propylene glycol, Polypropylene glycol, ethoxylated, Polypropylene glycol-ethylene oxide copolymer, Poly(propylene oxide-ethylene oxide), PPG Diol 3000EO, Proksanol, Pronon, Pronon 102, Pronon 104, Pronon 201, Pronon 204, Pronon 208, Propane-1,2-diol, ethoxylated, propoxylated, Propylene glycol, propylene oxide, ethylene oxide polymer, Propylene oxide-ethylene oxide copolymer, Propylene oxide-ethylene oxide polymer, Propylen M 12, Proxanol, Proxanol 158, Proxanol 228, Proxanol Tsl-3, RC 102, Regulaid, Rokopol 16P, Rokopol 30P, Rokopol 30P9, SK & F 18,667, SK&F 18,667, SK&F-18667, Slovanik, Slovanik 630, Slovanik 660, Slovanik M-640, Supronic B 75, Supronic E 400, Synperonic PE 30/40, TERGITOL, Tergitol monionic XH, Tergitol nonionic XH, Tergitol XH, Tergitol XH (nonionic), Teric PE40, Teric PE60, Teric PE 61, Teric PE 62, Teric PE70, Thanol E 4003, Therabloat, TsL 431, TVM 370, Unilube 50MB168X, Unilube 50MB26X, Velvetol OE 2NT1, Voranol P 2001, WS 661, Wyandotte 7135 Methyl oxirane polymer with oxirane, Ethoxylated polyoxypropylene f98;PEOPO;rc102;PLURONIC;75-h-1400;Poloxamer;9003-11-6;poloxalene;poloxalkol;pluronicf98 Polyethylene-polypropylene glycol
Ethylene glycol polyethylene-polypropylene glycol ether (1:2) Ethylene glycol - propylene glycol copolymer; GENAPOL ED 3060; Genapol ED 3060; 2-[1-[1-[2-[bis[2-[2-(2-hydroxyethoxy)propoxy]propyl]amino]ethyl-[2-[2-(2hydroxyethoxy) propoxy] propyl] amino]propan-2-yloxy]propan-2-yloxy]ethanol; ETHYLENEDIAMINE TETRAKIS(ETHOXYLATE-BLOCK-PROPOXYLATE) TETROL;1,2-Ethanediamine, methyloxirane, oxiranepolymer; 1,2 Ethanediamine, polymerwithmethyloxiraneandoxirane; Ethoxylated,propoxylatedethylenediamine; ethylenediaminetetrakis(ethoxylate-b-propoxylate; ETHY; cas : 26316-40-5; cas 26316-40-5; cas no: 26316-40-5; cas no: 26316-40-5; Ethylenediamine, ethoxylated and propoxylated; UNII-33F4HZ53CP; 1,2-Ethanediamine propylene oxide ethylene oxide polymer; 26316-40-5; Ethoxylated, propoxylated ethylenediamine; 1,2 Ethanediamine, polymer with 2-methyloxirane and oxirane; Ethylenediamine, ethoxylated and propoxylated; EC 500-047-1; 1,2-Ethanediamine, methyloxirane, oxirane polymer; 33F4HZ53CP; SCHEMBL180907141,2-Ethanediamine, polymer with methyloxirane and oxirane; Ethylene oxide-propylene oxide copolymer ethylenediamine ether; 1, 2-Ethanediamine, polymer with methyl oxirane and oxirane, minimum number average molecular weight (in amu), 1,100; GENAPOL ED 3060; Genapol ED 3060; ETHYLENEDIAMINE TETRAKIS(ETHOXYLATE-BLOCK-PROPOXYLATE) TETROL;1,2-Ethanediamine,methyloxirane,oxiranepolymer;1,2 Ethanediamine, polymerwithmethyloxiraneandoxirane; Ethoxylated,propoxylatedethylenediamine; ethylenediaminetetrakis(ethoxylate-b-propoxylate; ETHY; cas : 26316-40-5; cas 26316-40-5; cas no: 26316-40-5; cas no: 26316-40-5; Ethylenediamine, ethoxylated and propoxylated; UNII-33F4HZ53CP; 1,2-Ethanediamine propylene oxide ethylene oxide polymer; 26316-40-5; Ethoxylated, propoxylated ethylenediamine; 1,2 Ethanediamine, polymer with 2-methyloxirane and oxirane; Ethylenediamine, ethoxylated and propoxylated; EC 500-047-1; 1,2-Ethanediamine, methyloxirane, oxirane polymer; GENAPOL ED 3060; Genapol ED 3060; 2-[1-[1-[2-[bis[2-[2-(2-hydroxyethoxy)propoxy]propyl]amino]ethyl-[2-[2-(2hydroxyethoxy) propoxy] propyl] amino] propan-2-yloxy]propan-2-yloxy]ethanol; ETHYLENEDIAMINE TETRAKIS(ETHOXYLATE-BLOCK-PROPOXYLATE) TETROL;1,2Ethanediamine, methyloxirane,oxiranepolymer;1,2 Ethanediamine, polymerwithmethyloxiraneandoxirane; Ethoxylated,propoxylatedethylenediamine; ethylenediaminetetrakis(ethoxylate-b-propoxylate; ETHY; cas : 26316-40-5; cas 26316-40-5; cas no: 26316-40-5; cas no: 26316-40-5; Ethylenediamine, ethoxylated and propoxylated; UNII-33F4HZ53CP; 1,2-Ethanediamine propylene oxide ethylene oxide polymer; 26316-40-5; Ethoxylated, propoxylated ethylenediamine; 33F4HZ53CP; SCHEMBL180907141,2-Ethanediamine, polymer with methyloxirane and oxirane; Ethylene oxide-propylene oxide copolymer ethylenediamine ether; 1, 2-Ethanediamine, polymer with methyl oxirane and oxirane, minimum number average molecular weight (in amu), 1,100; genapol 3060 ed; genapol ed; genapol ed 3060 ; genapol ed3060 ; genapoled 3060 ; genapoled3060 ; genapol ed-3060 ; GENALPOL ED 3060; GENAPOL; Genapol PF 80 Powder; GENAPOL PF 80 FP; Genapol PF 80; GENAPOL PF 80 POWDER; GENAPOL PF 80 FP; GENAPOL PF 80; GENAPOL PF-80 POWDER; GENAPOL PF 80-FP; GENAPOL PF-80; GENAPOL FP 80 POWDER; GENAPOL PF 80 FP; GENAPOL FP 80; GENAPOL FP -80 POWDER; GENAPOL FP 80-FP; GENAPOL FP -80; genapol pf 80 powder; genapol pf 80 fp; genapol pf 80; genapol pf-80 powder; genapol pf 80-fp; genapol pf-80; genapol fp 80 powder; genapol pf 80 fp; genapol fp 80; genapol fp -80 powder; genapol fp 80-fp; genapol fp -80; Genapol Pf 80 Powder; Genapol Pf 80 Fp; Genapol Pf 80; Genapol Pf-80 Powder; Genapol Pf 80-Fp; Genapol Pf-80; Genapol Fp 80 Powder; Genapol Pf 80 Fp; Genapol Fp 80; Genapol Fp -80 Powder; Genapol Fp 80-Fp; Genapol Fp -80; Zeospan 8100L; ZS 2185; ZSN 8100; ZSP 8100; GENAPOL PF 80 FP; Genapol PF 80 FP; GENAPOL pf 80 FP; Genapol PF 80 fp; genapol PF 80 FP; genapol PF 80 FP; GENAPOL PF 80 fp; Genapol PF80FP; GENAPOL PF 80 FP.; Genapol pf 80 fp; Genapol fp; Genapol pf; Genapol fp 80 ; Genapol pf 80; Genapol fp 80 pf; Genapol pf 80 fp

 

 

GENAPOL PF 80 FP

 

Genapol PF 80 FP
WETTING AGENT
Genapol PF 80 FP is a EO/PO block polymer. 
Genapol PF 80 FP enhances the workability, penetration and binding power of concretes/mortars to surfaces.
Benefits
APEO-free

 

Genapol PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol PF 80 FP powder is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. Genapol PF 80 FP Powder has good wetting and dispersing action coupled with low foaming tendency.

Genapol PF 80 FP powder is used as a low-foaming surfactant with very good dispersing action in detergent and cleaning agent powders. These can be produced simply by mixing the powder components. Genapol PF 80 FP powder is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations.

Genapol PF 80 FP dispersed in the building industry and the wetting agent material is used as agent. Propylene oxide and ethylene oxide is polymerized product.

 

Genapol PF 80 FP is a nonionic emulsifier recommended for:
Styrene/acrylate dispersions
Acrylate dispersions
Vinyl acetate dispersions

 

 

Appearance Powder
Active Substance (ca.) 100%
Chemical Description EO/PO block copolymer

 

 

GENAPOL PF 80 FP
Nonionic wetting agent for the construction industry
COMPOSITION OF Genapol PF 80 FP
Block copolymer of propylene oxide and ethylene oxide, containing 80% w/w ethylene
oxide
PRODUCT PROPERTIES OF Genapol PF 80 FP
Molecular weight OF Genapol PF 80 FP O About 8000 g/mole
Active substance content about 100 %
Appearance of Genapol PF 80 FP at 20°C White fine powder
pH value of Genapol PF 80 FP (DIN 53996), 1% in water 6 - 8
Density of Genapol PF 80 FP at 70°C (DIN 51757) About of Genapol PF 80 FP 1,06 g/cm3
Viscosity of Genapol PF 80 FP at 70°C (DIN 53015) About 1200 mPa∙s
Melting point of Genapol PF 80 FP (DIN 51801) About 58°C
Solubility in water Genapol PF 80 FP is soluble in cold and hot water.
HLB value About 16
*) These characteristics are for guidance only and are not to be taken as product specifications. The tolerances are given in the
product specification sheet. For further information on product properties, toxicological, ecological and safety data, please refer to the
safety data sheet.
USE OF Genapol PF 80 FP
Genapol PF 80 FP is used as a wetting agent for solid admixtures in the construction
industry. Genapol PF 80 FP is applied for plasters and mortars based on cement, gypsum
or lime.
Genapol PF 80 FP has the following properties:
- Improved wetting of the fine particles of the dry plaster or mortar
- Plastification and improved workability of the plaster or mortar
- Improves the performance of the plaster or mortar and saves time
ADDITION LEVELS
0,005 - 0,025% based on the dry mortar mixture

 

Genapol PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol PF 80 FP powder is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. Genapol PF 80 FP Powder has good wetting and dispersing action coupled with low foaming tendency.

Genapol PF 80 FP powder is used as a low-foaming surfactant with very good dispersing action in detergent and cleaning agent powders. These can be produced simply by mixing the powder components. Genapol PF 80 FP powder is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations.

Genapol PF 80 FP dispersed in the building industry and the wetting agent material is used as agent. Propylene oxide and ethylene oxide is polymerized product.

 

Genapol PF 80 FP is a nonionic emulsifier recommended for:
Styrene/acrylate dispersions
Acrylate dispersions
Vinyl acetate dispersions

 

 

GENAPOL PF 80 FP

 

Genapol PF 80 FP
ISLATICI
Genapol PF 80 FP, bir EO / PO blok polimeridir.
Genapol PF 80 FP, beton / harçların yüzeylere işlenebilirliğini, penetrasyonunu ve bağlama gücünü artırır.
Yararları
APEO içermeyen

 

 

Görünüm Pudra
Aktif Madde (yaklaşık)% 100
Kimyasal Tanım EO / PO blok kopolimer

 

 

GENAPOL PF 80 FP
İnşaat endüstrisi için noniyonik ıslatıcı
Genapol PF 80 FP'nin BİLEŞİMİ
% 80 w / w etilen içeren propilen oksit ve etilen oksit blok kopolimeri
oksit
Genapol PF 80 FP'nin ÜRÜN ÖZELLİKLERİ
Genapol PF 80 FP O'nun moleküler ağırlığı Yaklaşık 8000 g / mol
% 100 aktif madde içeriği
20 ° C'de Genapol PF 80 FP'nin görünüşü Beyaz ince toz
Genapol PF 80 FP'nin (DIN 53996) pH değeri, suda% 1-8
Genapol PF 80 FP'nin 70 ° C'de yoğunluğu (DIN 51757) Genapol PF 80 FP hakkında 1.06 g / cm3
Genapol PF 80 FP'nin 70 ° C'de viskozitesi (DIN 53015) Yaklaşık 1200 mPa ∙ s
Genapol PF 80 FP'nin (DIN 51801) erime noktası Yaklaşık 58 ° C
Suda çözünürlük Genapol PF 80 FP soğuk ve sıcak suda çözünür.
HLB değeri Yaklaşık 16
*) Bu özellikler yalnızca bilgilendirme amaçlıdır ve ürün özellikleri olarak kabul edilmemelidir. Toleranslar
ürün özellik sayfası. Ürün özellikleri, toksikolojik, ekolojik ve güvenlik verileri hakkında daha fazla bilgi için lütfen
Güvenlik Bilgi Formu.
KULLANIM
Genapol PF 80 FP, yapıdaki katı katkılar için ıslatıcı olarak kullanılır
endüstrisi. Genapol PF 80 FP, çimento, alçı esaslı sıvalar ve harçlar için uygulanır
altın kireç.
Genapol PF 80 FP aşağıdaki özelliklere sahiptir:
- Kuru sıva veya harçtaki ince parçacıkların ıslatılması
- Sıva veya harcın plastifikasyonu ve geliştirilmiş işlenebilirliği
- Sıva veya harç performansını arttırır ve zaman kazandırır
İLAVE SEVİYELER
Kuru harç karışımına göre% 0.005 - 0.025

 

 

Genapol PF 80 PF yapı endüstrisinde disperse edici ve ıslatıcı ajan olarak kullanılan malzemedir.Propilen oxide ve etilen oksitin polimerize edilmiş ürünüdür.
Genapol PF 80 FP nin tavsiye edildiği non-iyonik emülsiyonlaştırıcı :

 

 

Stiren / akrilat dispersiyonları
akrilat dispersiyonları
Vinil asetat dispersiyonlan

 

Genapol PF 80 FP Powder, kimya endüstrisi için düşük köpüklü, iyonik olmayan bir yüzey aktif maddedir. Bu beyaz toz, diğer noniyonik, anyonik ve katyonik yüzey aktif cisimleri ile kombinasyon halinde kullanılabilir. Genapol PF 80 tozu normalde kullanılan konsantrasyonlarda su sertlik tuzlarına ve asitlere ve alkalilere karşı dayanıklıdır. Genapol PF 80 FP Toz, düşük köpüklenme eğilimi ile birlikte iyi bir ıslatma ve dağıtma etkisine sahiptir.

 

Genapol PF 80 FP tozu, deterjan ve temizleme maddesi tozlarında çok iyi dispersiyon etkisine sahip düşük köpüklü bir yüzey aktif madde olarak kullanılır. Bunlar sadece toz bileşenlerin karıştırılmasıyla üretilebilir. Genapol PF 80 FP tozu, emülsiyon polimerizasyonunda düşük köpüren bir emülgatör olarak ve pigment pastaları ve preparatları için bir dağıtıcı ajan olarak da kullanılır.
Genapol PF 80 Powder, kimya endüstrisi için düşük köpüklü, iyonik olmayan bir yüzey aktif maddedir. Bu beyaz toz, diğer noniyonik, anyonik ve katyonik yüzey aktif cisimleri ile kombinasyon halinde kullanılabilir. Genapol PF 80 FP tozu, su sertlik tuzlarına ve normalde kullanılan konsantrasyonlarda asitlere ve alkalilere karşı dayanıklıdır. Genapol PF 80 FP Toz, düşük köpüklenme eğilimi ile birlikte iyi bir ıslatma ve dağıtma etkisine sahiptir.

 

Genapol PF 80 FP tozu, deterjan ve temizlik maddesi tozlarında çok iyi dispersiyon etkisi olan düşük köpüklü bir yüzey aktif madde olarak kullanılır. Bunlar sadece toz bileşenlerin karıştırılmasıyla üretilebilir. Genapol PF 80 FP tozu, emülsiyon polimerizasyonunda düşük köpüren bir emülgatör olarak ve pigment pastaları ve preparatları için bir dağıtıcı ajan olarak da kullanılır.

Genapol PF 80 FP yapı endüstrisinde dağılmış ve ıslatıcı ajan malzemesi ajan olarak kullanılmıştır. Propilen oksit ve etilen oksit polimerize edilmiş üründür.

 

 

GENAPOL PF 80 FP

 

Genapol PF 80 FP
AGENT MOUILLANT
Genapol PF 80 FP est un polymère séquencé EO / PO.
Genapol PF 80 FP améliore l'ouvrabilité, la pénétration et le pouvoir liant des bétons / mortiers aux surfaces.
Avantages
Sans APEO

 

 

Poudre d'apparence
Substance active (environ) 100%
Description chimique Copolymère séquencé EO / PO

 

 

GENAPOL PF 80 FP
Agent mouillant non ionique pour l'industrie de la construction
COMPOSITION DE Genapol PF 80 FP
Copolymère séquencé d'oxyde de propylène et d'oxyde d'éthylène, contenant 80% p / p d'éthylène
oxyde
PROPRIÉTÉS DU Genapol PF 80 FP
Poids moléculaire DE Genapol PF 80 FP O Environ 8000 g / mole
Teneur en substance active d'environ 100%
Aspect de Genapol PF 80 FP à 20 ° C Poudre fine blanche
Valeur pH de Genapol PF 80 FP (DIN 53996), 1% dans l'eau 6 - 8
Densité de Genapol PF 80 FP à 70 ° C (DIN 51757) A propos de Genapol PF 80 FP 1,06 g / cm3
Viscosité de Genapol PF 80 FP à 70 ° C (DIN 53015) Environ 1200 mPa ∙ s
Point de fusion de Genapol PF 80 FP (DIN 51801) Environ 58 ° C
Solubilité dans l'eau Genapol PF 80 FP est soluble dans l'eau froide et chaude.
Valeur HLB Environ 16
*) Ces caractéristiques sont fournies à titre indicatif uniquement et ne doivent pas être considérées comme des spécifications de produit. Les tolérances sont données dans le
fiche technique du produit. Pour plus d'informations sur les propriétés du produit, les données toxicologiques, écologiques et de sécurité, veuillez vous référer au
fiche de données de sécurité.
UTILISATION DU Genapol PF 80 FP
Genapol PF 80 FP est utilisé comme agent mouillant pour les mélanges solides dans la construction
industrie. Genapol PF 80 FP est appliqué pour les enduits et mortiers à base de ciment, gypse
ou de la chaux.
Genapol PF 80 FP a les propriétés suivantes:
- Mouillage amélioré des fines particules de plâtre ou de mortier sec
- Plastification et ouvrabilité améliorée du plâtre ou du mortier
- Améliore les performances du plâtre ou du mortier et fait gagner du temps
NIVEAUX D'ADDITION
0,005 - 0,025% sur la base du mélange de mortier sec

 

La poudre Genapol PF 80 FP est un tensioactif non ionique à faible mousse pour l'industrie chimique. Cette poudre blanche peut être utilisée en combinaison avec d'autres tensioactifs non ioniques, anioniques et cationiques. La poudre Genapol PF 80 FP résiste aux sels de dureté de l'eau et aux acides et alcalis aux concentrations normalement utilisées. La poudre Genapol PF 80 FP a une bonne action de mouillage et de dispersion associée à une faible tendance à mousser.

 

La poudre Genapol PF 80 fp est utilisée comme tensioactif peu moussant avec une très bonne action dispersante dans les poudres détergentes et détergentes. Ceux-ci peuvent être produits simplement en mélangeant les composants en poudre. La poudre Genapol PF 80 FP est également utilisée comme émulsifiant peu moussant dans la polymérisation en émulsion et comme agent dispersant pour les pâtes et préparations pigmentaires.
 

 

Ataman Chemicals © 2015 All Rights Reserved.