1-9 A-D E-G H-M N-P Q-S T-Z

DIMETHYL ISOPHTHALATE

SYNONYMS:
dimethyl benzene-1,3-dicarboxylate; DIMETHYL ISOPHTHALATE; 1459-93-4; Dimethyl m-phthalate; Isophthalic acid dimethyl ester; Methyl isophthalate; 1,3-Benzenedicarboxylic acid, dimethyl ester; Morflex 1129; Dimethyl 1,3-benzenedicarboxylate; Dimethylisophthalate; Methyl 3-(carbomethoxy)benzoate; Isophthalic acid, dimethyl ester; Dimethyl benzene-1,3-dicarboxylate; Dimethylester kyseliny isoftalove [Czech]; AI3-02247; Dimethylester kyseliny tereftalove; Dimethyl isophthalate, analytical standard; ISOPHTHALIC ACID DIMETHYL ESTER (D6); 1,3- benzenedicarboxylic acid, 1,3-dimethyl ester; dimethyl benzene-1,3-dicarboxylate; dimethyl m-phthalate; methyl 3-(carbomethoxy)benzoate; isophthalic acid, dimethyl ester; DMIP; 1,3-Benzenedicarboxylic acid dimethyl ester; 1,3-Benzenedicarboxylic acid, dimethyl ester [ACD/Index Name]; 1459-93-4 [RN]; 215-951-9 [EINECS]; Dimethyl isophthalate [ACD/IUPAC Name]; Dimethyl-isophthalat [German] [ACD/IUPAC Name]; Isophtalate de diméthyle [French] [ACD/IUPAC Name]; 1,3-Benzenedicarboxylic acid, 1,3-dimethyl ester; 1,3-BENZENEDICARBOXYLIC ACID,DIMETHYL ESTER; 1,3-dimethyl benzene-1,3-dicarboxylate; 1,3-DIMETHYL PHTHALAE'1459-93-4; 2,4-dimethylbenzene-1,3-dicarboxylate; Benzene-1,3-dicarboxylic acid dimethyl ester; Dimethyl 1, 3-benzenedicarboxylate; Dimethyl 1,3-benzenedicarboxylate; Dimethyl benzene-1,3-dicarboxylate; dimethyl isophthalate 98%; dimethyl isophthalate, 98% Dimethyl m-phthalate; Dimethylester kyseliny isoftalove; Dimethylester kyseliny isoftalove [Czech]; Dimethylester kyseliny tereftalove [Czech]; Dimethylester kyseliny tereftalove; Dimetil isofitalat;; isophthalic acid dimethyl ester; Isophthalic acid, bis-methyl ester; Isophthalic acid, dimethyl ester; Methyl 3-(carbomethoxy)benzoate; methyl 3-(methoxycarbonyl)benzoate; Methyl isophthalate; 1,3-Benzenedicarboxylic acid, dimethyl ester ; 4-09-00-03293 (Beilstein Handbook Reference) ; AI3-02247 ; BRN 1912251 ; Dimethyl 1,3-benzenedicarboxylate ; Dimethyl isophthalate ; Dimethyl m-phthalate ; Dimethylester kyseliny isoftalove ; Dimethylester kyseliny isoftalove [Czech] ; EINECS 215-951-9 ; HSDB 6138 ; Isophthalic acid dimethyl ester ; Methyl 3-(carbomethoxy)benzoate ; Methyl isophthalate ; Morflex 1129 ; NSC 15313 ; 1,3-Benzenedicarboxylic acid, 1,3-dimethyl ester; Dimethyl isophthalate; Dimethyl iso phthalate; Di methyl iso phthalate; Dimethylisophthalate; DimethylIsophthalate; Dımethyl ısophthalate; Dimethil isophthalate; Dimethyl izophthalate; Dimetil isofitalat; Dimetilisofitalat; Dımetılısofıtalat; DIMETHYLISOPHTHALATE; DIMETILISOFITALAT; DI METHYL ISOPHTHALATE

 

 

CAS NO: 1459-93-4
OTHER CAS: 1352054-39-7
Molecular Formula: C10H10O4
Chemical Names: 
DIMETHYL ISOPHTHALATE
1459-93-4
Dimethyl m-phthalate
Isophthalic acid dimethyl ester
Methyl isophthalate
Molecular Weight: 194.18 g/mol

 

 

Property Name Property Value
Molecular Weight 194.18 g/mol
XLogP3 2.2
Hydrogen Bond Donor Count 0
Hydrogen Bond Acceptor Count 4
Rotatable Bond Count 4
Exact Mass 194.057909 g/mol
Monoisotopic Mass 194.057909 g/mol
Topological Polar Surface Area 52.6 A^2
Heavy Atom Count 14
Formal Charge 0
Complexity 202
Isotope Atom Count 0
Defined Atom Stereocenter Count 0
Undefined Atom Stereocenter Count 0
Defined Bond Stereocenter Count 0
Undefined Bond Stereocenter Count 0
Covalently-Bonded Unit Count 1
Compound Is Canonicalized Yes

 

 

Needles from dilute alcohol
Boiling Point:282.0°C
Melting Point :67.5°C
Density HelpNew Window:1.194 g/cu cm at 20 deg C
Vapor Pressure HelpNew Window: 9.63X10-3 mm Hg at 25 deg C /estimated/
Decomposition HelpNew Window
When heated to decomp it emits acrid smoke and fumes.
Refractive Index HelpNew Window
Index of refraction: 1.5168 at 20 deg C/D

 

 


Other Experimental Properties HelpNew Window
Phthalate esters would be expected to have UV maxima in the 230 nm and 270 nm regions. /Phthalate esters/

 

Uses

 


Category Category Description Categorization Type
Drinking_water, food_contact, plastics Plastic products, industry for plastics, manufacturing of plastics, plastic additives (modifiers included when known) CPCat Cassette
Food_contact Includes food packaging, paper plates, cutlery, small appliances such as roasters, etc.; does not include facilities that manufacture food CPCat Cassette
Food_contact, plastics Plastic products, industry for plastics, manufacturing of plastics, plastic additives (modifiers included when known) CPCat Cassette
Manufacturing, plastics Plastic products, industry for plastics, manufacturing of plastics, plastic additives (modifiers included when known) CPCat Cassette
Manufacturing, raw_material Raw materials used in a variety of products and industries (e.g. in cosmetics, chemical manufacturing, production of metals, etc); modifiers included when known to indicate what the raw materials are used for CPCat Cassette
Plastics Plastic products, industry for plastics, manufacturing of plastics, plastic additives (modifiers included when known) CPCat Cassette
Rubber Rubber products (e.g. tires) and their manufacture CPCat Cassette

 

 

Industry Uses HelpNew Window
Intermediates

 

 

Methods of Manufacturing HelpNew Window
Methanol + isophthalic acid 
1,3-Benzenedicarboxylic acid, dimethyl ester is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

 

 

Manufacturers HelpNew Window
Unitex Chemical Corp., 520 Broome Rd., P.O. Box 16344, Greensboro, NC 27406, (336) 378-0965; Production site: Greensboro, NC 27406

 

 

Manufacturers HelpNew Window
Unitex Chemical Corp., 520 Broome Rd., P.O. Box 16344, Greensboro, NC 27406, (336) 378-0965; Production site: Greensboro, NC 27406

 

 

Vertellus Specialties, Inc., 300 N. Meridian St., Suite 1500, Indianapolis, IN 46204-1763, (317) 247-8141; Vertellus Performance Materials Inc., 2110 High Point Rd., Greensboro, NC 27403-2642, (336) 292-1781; Production site: Greensboro, NC 27403-2642
General Manufacturing Information HelpNew Window
Industry Processing Sectors
Plastic material and resin manufacturing

 

Aggregated GHS information provided by 62 companies from 4 notifications to the ECHA C&L Inventory.

Reported as not meeting GHS hazard criteria by 32 of 62 companies. For more detailed information, please visit ECHA C&L website

Of the 3 notification(s) provided by 30 of 62 companies with hazard statement code(s):

H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]

Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown.

 

Accidental Release Measures HelpNew Window
9.3.1Disposal Methods HelpNew Window
SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

 

 

from HSDB
9.3.2Preventive Measures HelpNew Window
SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants.

 

 

Human Toxicity Excerpts HelpNew Window
/ALTERNATIVE and IN VITRO TESTS/ Comparative toxicity of phthalate esters to HeLa-S3 cells was studied by determining their effect on doubling time of the cells. The toxicity of the esters decreasing in order: diethyl phthalate, butyl phthalyl butyl glycolate, di-iso-butyl phthalate, ethyl phthalyl ethyl glycolate, bis(2-ethylhexyl) phthalate, dimethyl isophthalate, dibutyl phthalate, methyl phthalyl ethyl glycolate, dimethyl phthalate, and dioctyl phthalate.

 

 

Non-Human Toxicity Excerpts HelpNew Window
/LABORATORY ANIMALS: Acute Exposure/ Eye Rabbit 500 mg/26 hr severe toxic effects were observed.

 

/ALTERNATIVE and IN VITRO TESTS/ To assess the toxicity of dimethyl isophthalate to cells in culture, monolayers of L-cells and chicken embryos cells were overlaid with agar and undiluted dimethyl isophthalate was then applied to paper disks which had previously been placed on the agar overlay. Dimethyl isophthalate was scored as toxic since it created a zone of dead cells in the area adjacent to the test site.

 

Environmental Fate/Exposure Summary HelpNew Window
Dimethyl isophthalate's production and use as a polyacrylate resin comonomer and as a perfume fixative may result in its release to the environment through various waste streams. If released to air, an estimated vapor pressure of 9.6X10-3 mm Hg at 25 deg C indicates dimethyl isophthalate will exist solely as a vapor in the atmosphere. Vapor-phase dimethyl isophthalate will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals; the half-life for this reaction in air is estimated to be 25 days. Dimethyl isophthalate does contain chromophores that absorb at wavelengths >290 nm and therefore may be susceptible to direct photolysis by sunlight. If released to soil, dimethyl isophthalate is expected to have very high mobility based upon an estimated Koc of 36. Volatilization from moist soil surfaces is not expected to be an important fate process based upon an estimated Henry's Law constant of 6.1X10-8 atm-cu m/mole. Biodegradation is expected to be an important fate process in both soil and water based on a study where dimethyl isophthalate reached 94 to 102% of its theoretical BOD after 2 weeks using an activated sludge inoculum. If released into water, dimethyl isophthalate is not expected to adsorb to suspended solids and sediment based upon the estimated Koc. Volatilization from water surfaces is not expected to be an important fate process based upon this compound's estimated Henry's Law constant. An estimated BCF of 4 suggests the potential for bioconcentration in aquatic organisms is low. Hydrolysis is not expected to be an important process based on estimated hydrolysis half-lives of 350 and 35 days at pHs 7 and 8, respectively. Occupational exposure to dimethyl phthalate may occur through inhalation of aerosols and dermal contact with this compound at workplaces where dimethyl isophthalate is produced or used. Use data indicate that the general population may be exposed to dimethyl isophthalate via dermal contact with and inhalation of products containing this compound. (SRC)

 

 

Natural Pollution Sources HelpNew Window
The identification of dimethyl isophthalate in surface waters near, and shortly after the Mount St. Helens volcano erupted is believed to be due to the destructive pyrolysis of surrounding conifers and other organic matter(1).

 

 

Artificial Pollution Sources HelpNew Window
Dimethyl isophthalate's production and use as a polyacrylate resin comonomer and as a perfume fixative(1) may result in its release to the environment through various waste streams(SRC).

 

 

Environmental Fate HelpNew Window
TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 36(SRC), determined from a structure estimation method(2), indicates that dimethyl isophthalate is expected to have very high mobility in soil(SRC). Volatilization of dimethyl isophthalate from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 6.1X10-8 atm-cu m/mole(SRC), using a fragment constant estimation method(3). Dimethyl isophthalate is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 9.6X10-3 mm Hg(4). Dimethyl isophthalate, present at 100 mg/L, reached 94 to 102% of its theoretical BOD after 2 weeks using an activated sludge inoculum(5).

 

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 36(SRC), determined from a structure estimation method(2), indicates that dimethyl isophthalate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 6.1X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(5), an estimated BCF of 4(SRC), from an estimated log Kow of 1.66(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Hydrolysis is not expected to be an important process(SRC) based on estimated hydrolysis half-lives of 350 and 35 days at pHs 7 and 8, respectively(8). Dimethyl isophthalate, present at 100 mg/L, reached 94 to 102% of its theoretical BOD after 2 weeks using an activated sludge inoculum(9).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dimethyl isophthalate, which has an estimated vapor pressure of 9.6X10-3 mm Hg at 25 deg C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase dimethyl isophthalate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 25 days(SRC), calculated from its rate constant of 6.4X10-13 cu cm/molecule-sec at 25 deg C(SRC) that was derived using a structure estimation method(3). Dimethyl isophthalate does contain chromophores that absorb at wavelengths >290 nm(4) and therefore may be susceptible to direct photolysis by sunlight(SRC).

 

Environmental Abiotic Degradation HelpNew Window
The rate constant for the vapor-phase reaction of dimethyl isophthalate with photochemically-produced hydroxyl radicals has been estimated as 6.4X10-13 cu cm/molecule-sec at 25 deg C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 25 days at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). A base-catalyzed second-order hydrolysis rate constant of 0.23 L/mole-sec(SRC) was estimated using a structure estimation method(2); this corresponds to half-lives of 350 and 35 days at pH values of 7 and 8, respectively(2). Dimethyl isophthalate does contain chromophores that absorb at wavelengths >290 nm(3) and therefore may be susceptible to direct photolysis by sunlight(SRC).

 

 

Environmental Bioconcentration HelpNew Window
An estimated BCF of 4 was calculated in fish for dimethyl isophthalate(SRC), using an estimated log Kow of 1.66(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

 

 

Soil Adsorption/Mobility HelpNew Window
Using a structure estimation method based on molecular connectivity indices(1), the Koc of dimethyl isophthalate can be estimated to be 36(SRC). According to a classification scheme(2), this estimated Koc value suggests that dimethyl isophthalate is expected to have very high mobility in soil.

 

 

Volatilization from Water/Soil HelpNew Window
The Henry's Law constant for dimethyl isophthalate is estimated as 6.1X10-8 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that dimethyl isophthalate is expected to be essentially nonvolatile from water surfaces(2). Dimethyl isophthalate is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 9.6X10-3 mm Hg(3).

 

 

Environmental Water Concentrations HelpNew Window
SURFACE WATER: Dimethyl isophthalate was identified as a major peak in a sample from Smith Creek, Sept 1980, near, and shortly after the Mt. St. Helens explosion and was also identified in analysis of lake water samples taken at the same time (Spirit Lake, South Fork Castle Lake)(1).

 

 

Probable Routes of Human Exposure HelpNew Window
Occupational exposure to dimethyl phthalate may occur through inhalation of aerosols and dermal contact with this compound at workplaces where dimethyl isophthalate is produced or used. Use data indicate that the general population may be exposed to dimethyl isophthalate via dermal contact with and inhalation of products containing this compound. (SRC)

 

 

Specifications
Boiling Point 124°C (16.0 hPa)
Viscosity 2.14 mPa.s (99°C)
Packaging Plastic bottle
Color White
Melting Point >66.0°C
Quantity 25g
Flash Point 138°C
Infrared Spectrum Authentic
Assay Percent Range 99%
Linear Formula C6H4(CO2CH3)2
Show More 
Certificates
Certificate of Analysis (30)

 

(All certificate documents open as a .pdf)

 

Lot Number A0379668 Lot Number A0369581 Lot Number A0334679 Lot Number A0310556 Lot Number A0309048 Lot Number A0308839 Lot Number A0304501 Lot Number A0296472 Lot Number A0287488 Lot Number A0283164 Lot Number A0342895 Lot Number A0346771
Show More
Safety and Handling
EINECSNumber : 215-951-9

 

RTECSNumber : NT2540000

 

TSCA : TSCA
CAS Number: 1459-93-4 Picture of molecule3D/inchi
Other: 1352054-39-7
ECHA EINECS - REACH Pre-Reg: 215-951-9
FDA UNII: 2UY9Y3574K
Nikkaji Web: J7.498E
Beilstein Number: 1912251
MDL: MFCD00008433
XlogP3-AA: 2.20 (est)
Molecular Weight: 194.18650000
Formula: C10 H10 O4
NMR Predictor: Predict (works with chrome or firefox)
Category:indirect food additives: adhesives and components of coatings

US / EU / FDA / JECFA / FEMA / FLAVIS / Scholar / Patent Information:
Google Scholar: Search
Google Books: Search
Google Scholar: with word "volatile" Search
Google Scholar: with word "flavor" Search
Google Scholar: with word "odor" Search
Google Patents: Search
US Patents: Search
EU Patents: Search
Pubchem Patents: Search
PubMed: Search
NCBI: Search
FDA/DG SANTE Petitions, Reviews, Notices:
FCN 4 Isophthalic acid or dimethyl isophthalate View - notice
DG SANTE Food Contact Materials: isophthalic acid, dimethyl ester
FDA Mainterm (IAUFC): 1459-93-4 ; DIMETHYL ISOPHTHALATE

 

 


Physical Properties:
Assay: 95.00 to 100.00
Food Chemicals Codex Listed: No
Soluble in:
water, 1778 mg/L @ 25 °C (est)

Organoleptic Properties:
Odor and/or flavor descriptions from others (if found).

Cosmetic Information:
None found

Suppliers:
EMD Millipore
For experimental / research use only.
Dimethyl Isophthalate
sds
Santa Cruz Biotechnology
For experimental / research use only.
Dimethyl Isophthalate
sds
Sigma-Aldrich: Aldrich
For experimental / research use only.
Dimethyl Isophthalate ReagentPlus®, 99%
sds
TCI AMERICA
For experimental / research use only.
Dimethyl Isophthalate >99.0%(GC)

Safety Information:
Preferred SDS: View

Hazards identification

Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
None found.
GHS Label elements, including precautionary statements

Pictogram 

Hazard statement(s)
None found.
Precautionary statement(s)
None found.
Oral/Parenteral Toxicity:
intraperitoneal-mouse LDLo 971 mg/kg
BEHAVIORAL: SOMNOLENCE (GENERAL DEPRESSED ACTIVITY) SENSE ORGANS AND SPECIAL SENSES: PTOSIS: EYE
Journal of Pharmaceutical Sciences. Vol. 56, Pg. 1446, 1967.

 

 

Dermal Toxicity:
Not determined
Inhalation Toxicity:
Not determined

Safety in Use Information:
Category: indirect food additives: adhesives and components of coatings
Recommendation for dimethyl isophthalate usage levels up to:
not for fragrance use.

Recommendation for dimethyl isophthalate flavor usage levels up to:
not for flavor use.

Safety References:
EPI System: View
NLM Hazardous Substances Data Bank:Search
Env. Mutagen Info. Center:Search
EPA ACToR:Toxicology Data
EPA Substance Registry Services (SRS):Registry
Laboratory Chemical Safety Summary :15088
National Institute of Allergy and Infectious Diseases:Data
WGK Germany:3
dimethyl benzene-1,3-dicarboxylate
Chemidplus:0001459934
RTECS:NT2540000 for cas# 1459-93-4

References:
dimethyl benzene-1,3-dicarboxylate
NIST Chemistry WebBook: Search Inchi
Pubchem (cid): 15088
Pubchem (sid): 134980338
Pherobase: View

Other Information:
(IUPAC): Atomic Weights of the Elements 2009
(IUPAC): Atomic Weights of the Elements 2009 (pdf)
Videos: The Periodic Table of Videos
tgsc: Atomic Weights use for this web site
(IUPAC): Periodic Table of the Elements
FDA Indirect Additives used in Food Contact Substances: View
CHEMBL: View
UM BBD: Search
HMDB (The Human Metabolome Database): Search
Export Tariff Code: 2917.39.7000
Haz-Map: View
ChemSpider: View

Potential Blenders and core components note
None Found

Potential Uses:
None Found

Occurrence (nature, food, other):note
not found in nature

 

 

Dimethyl isophthalate Properties
Melting point:64-68 °C(lit.)
Boiling point:124 °C (12.0016 mmHg)
Density 1.1477
vapor density 6.8 (vs air)
vapor pressure 93.7 mm Hg ( 208 °C)
refractive index 1.5168 (estimate)
Flash point:138 °C
storage temp. Store below +30°C.
solubility 0.29g/l insoluble
form Flakes or Crystalline Powder
color White to off-white
Water Solubility Insoluble
BRN 1912251
CAS DataBase Reference1459-93-4(CAS DataBase Reference)
NIST Chemistry Reference1,3-Benzenedicarboxylic acid dimethyl ester(1459-93-4)
EPA Substance Registry System1,3-Benzenedicarboxylic acid, dimethyl ester(1459-93-4)
SAFETY
Risk and Safety Statements
Signal word Warning 
Hazard statements H320-H303 
Precautionary statements P264-P305+P351+P338+P337+P313 
Hazard Codes Xi 
Risk Statements 36 
Safety Statements 26-36 
WGK Germany 3
RTECS NT2540000
TSCA Yes 
HS Code 29173980 
NFPA 704
Diamond Hazard Value Description
0 0
Health 0 Poses no health hazard, no precautions necessary and would offer no hazard beyond that of ordinary combustible materials
Flammability 1 Materials that require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Includes some finely divided suspended solids that do not require heating before ignition can occur. Flash point at or above 93.3 °C (200 °F). (e.g. mineral oil, ammonia)
Instability 0 Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2)

 

DMIP, Dimethyl Isophthalate, CAS: 1459-93-4, is the Isophtalic Acid dimethyl ester derivative; it is considered a specialty chemical and has several checmial applications.

 

DMIP, Dimethyl Isophthalate, is an intermediate in the synthesis of polyesters, it allows to obtain high quality fibers and polyester films, improved clarity and structural strength. Beside helping modifying the clarity of PET, DMIP, Dimethyl Isophthalate, also lowers the melting point of PET resins, which increase the performance in films, blow-molded bottles and other applications, thanks to an improvement in the processing temperatures.
The main advantage of DMIP is that this raw material allows to obtain high molecular weight polyester fibers through transesterification of methyl ester with a glycol.

 

 

Another significant application area for DMIP is in engineering plastics.
Because of its purity, DMIP can also be used as intermediate in pharmaceutical application.

 

 

Product: DMIP, Dimethyl Isophthalate, CAS: 1459-93-4
Appearance White, flake solid
Melting Point, ? 67 - 68
Content, by GC Min. 99.5
Color(APHA,20% Ethanol) Max. 15
Moisture % Max. 0.10
Acid Value(mgKOH/g) Max. 0.10

 

 

About this substance
Helpful information
This substance is manufactured and/or imported in the European Economic Area in 1 000 - 10 000 tonnes per year.

 

This substance is used in formulation or re-packing, at industrial sites and in manufacturing.

 

Consumer Uses
ECHA has no public registered data indicating whether or in which chemical products the substance might be used. ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment.

 

 

Article service life
ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment. ECHA has no public registered data indicating whether or into which articles the substance might have been processed.

 

 

Widespread uses by professional workers
ECHA has no public registered data indicating whether or in which chemical products the substance might be used. ECHA has no public registered data on the types of manufacture using this substance. ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment.

 

 

Product name Dimethyl isophthalate 
CAS No. 1459-93-4
EINECS 205-016-3
M.F. C14H14O4
M.W. 246.3

 

Properties

Appearance Colorless transparent liquid

Density 1.1477 g/cm3

 

Boiling Point 124 ? at 760 mmHg
Melting Point 66-69 ?
Flash Point 138 ?

 

Specification

Purity 99.5%min

 

Moisture 0.5% max
Acidity 0.1 max

 

Application

Used for synthesis of isophthalic acid diphenyl ester, as PBT, heat resistant polymer monomer, used for other organic synthesis.

 


Storage

 

Placed in sealed container and kept in a cool and dry place.

Avoid strong vibration, insolation, high temperature, smoke and fire.

 

Catalogue Number:D474045
Chemical Name:Dimethyl Isophthalate
Synonyms:1,3-Benzenedicarboxylic Acid 1,3-Dimethyl Ester; 1,3-Benzenedicarboxylic Acid Dimethyl Ester; Dimethyl Ester Isophthalic Acid; 1,3-Di(methoxycarbonyl)benzene; DMIP; Dimethyl 1,3-Benzenedicarboxylate; Dimethyl Isophthalate; Dimethyl Isophthalate-maleic Acid-terephthalic Acid Copolymer; Dimethyl m-Phthalate; Methyl 3-Carbomethoxybenzoate; Methyl Isophthalate; Morflex 1129; NSC 15313
CAS Number:1459-93-4
Molecular Formula:C0°H0°O4
Appearance:White to Off-White Solid
Melting Point:67-68ºC (dec.)
Molecular Weight:194.18
Storage:Refrigerator
Solubility:Chloroform (Slightly), Methanol (Slightly)
Category:Aromatics, Pharmaceuticals, Intermediates & Fine Chemicals
Applications:Dimethyl isophthalate is a common ingredient in polyester resins, and also used as a plasticizer.

 

DMP is a colorless, lightfast, faint aromatic odor liquid and finds applications as plasticizers for nitrocellulose and cellulose acetate resins. It yields excellent films having good adhesion with both, in proportions up to 75% of the weight of the cellulose ester. It also plasticizes rubber and Poly Vinyl Acetals. Other applications include Fiber Reinforced Plastics, solid rocket propellants, lacquer plastics, rubber coating agents, safety glass, molding powders, cement concrete additive, insect repellants and perfumery compounds.

Incepted in 2007, Labdhi Chemicals is a trusted firm of the market area. At present, our firm is manufacturing, of Inorganic Chemicals, Organic Chemicals, Industrial Chemicals, Acetic Acid, Benzyl Compounds, Calcium Chloride, Liquid Acetone, Copper Sulphate, Thiourea Powder, Carbon Black and Aerosil Powder. All these chemicals are best in reactions and completely safe to use. Experts of our team make these longer life having products in different chemical compositions which suit best for the specific needs of the clients. These chemicals are recommended to the companies by industrial experts who have more knowledge of chemical formulation and reactions. All our products are required in chemical, biochemical, agrochemical, pharmaceuticals and many other industries for making medicines, fertilizers and other products.

HAZARDS IDENTIFICATION

 

EMERGENCY OVERVIEW
Irritating to eyes and respiratory system.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation:
Dust is irritating to the respiratory tract. Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Can produce delayed pulmonary edema.
Chronic:
Effects may be delayed.
Section 4 - FIRST AID MEASURES

 

 

Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Get medical aid. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES

 

 

General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Section 6 - ACCIDENTAL RELEASE MEASURES

 

 

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
Section 7 - HANDLING and STORAGE

 

 

Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION

 

 

Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 1459-93-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

 

 


Physical State: Flakes
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: 93.7 mm Hg @208 deg C
Viscosity: 2.14 cP 99.00 deg
Boiling Point: 124 deg C @ 12.00mmHg
Freezing/Melting Point: 66.00 - 67.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 138 deg C ( 280.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C10H10O4
Molecular Weight: 194.19
Section 10 - STABILITY AND REACTIVITY

 

 

Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION

 

 

RTECS#:
CAS# 1459-93-4: NT2540000 LD50/LC50:
CAS# 1459-93-4: Draize test, rabbit, eye: 500 mg/24H Mild.
Carcinogenicity:
Dimethyl Isophthalate - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

 

Ataman Kimya A.Ş. © 2015 Tüm Hakları Saklıdır.